|
| 1 | Dismantling floor tiling granite work in flooring and skirting (excluding base courseincluding stacking of serviceable material and disposal of unserviceable material within a lead of 100 meter. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels.1:3:6 (1Cement: 3 finesand: 6 graded stone aggregate 20mm nominal Size) Crushed |
| 3 | Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels. Ganite of any color other than black as approved by EIC |
| 4 | Providing and laying polished vitrified floor tiles of size 600x600mm (thickness to be specified by the manufacturer) approved make like NITCO, JHONSON, KAJARIA in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work. |
| 5 | Demolishing brick work in cement mortar up to floor V level including stacking of serviceable material and disposal of unserviceable material disposal lead up to 50m. |
| 6 | Brick work with FPS bricks of class designation 75 in super structure up to all floors. In cement mortar 1cement: 4 fine sand mortar including carriage |
| 7 | 12mm thick cement plaster on half brick / concrete wall of mix 1:6 (1cement: 6 coarse sand) |
| 8 | Removing paint by scrapping and sand papering, chipping of plaster including preparing the surface complete. |
| 9 | Wall painting with plastic emulsion paint (two or more coats) of approved brand and manufacture to give an even shade. New work including priming coat |
| 10 | Finishing with Apex/ exterior acrylic paint or equivalent paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate |
| 11 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 12 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 13 | Providing and fixing Tiled/GRID false ceiling of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paintpaint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white/Off white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electrostatically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending |
| 14 | Providing and fixing Aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, dashfastners, handles, hinges, all complete as per architectural drawings and the directions of Engineer-incharge.(excluding Glazing/ panelling/ sliding channels/ sliding arrangement and other fittings complete) Powder coated aluminum (minimum thickness of powder coating 50 micron) Using 2.5\\"x1.5\\" sections of approved Gauge |
| 15 | Extra for using 5mm frosted/ blind glass instead of 12mm thick prelaminated particle board |
| 16 | Providing and fixing colour coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerin- Charge)0.50mm Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation . The sheet shall be fixed using self drilling/self tapping screws J or L hooks,bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washerscomplete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 17 | Providing and fixing plain colour coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerin- Charge)0.50mm+/- 5% total coated thickness The sheet shall be fixed using self drilling/self tapping screws with polymer coated J or L hooks,bolts and nuts and G.l. limpet washers or with G.l. limpet washerscomplete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 18 | Providing and fixing plained eaves boarding including a coat of wood primer and two coats of synthetic enamel paint complete Budloo wood 250x32 mm (nominal size) |
| 19 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type loll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge.Pre-laminated particle board with decorative lamination on both side |
| 20 | Providing & fixing of bib cock of standard quality make jaguar hindware cera etc Please Enable Macros to View BoQ information |
| 21 | Providing & fixing of bib cock of standard quality make jaguar hindware cera etc Please Enable Macros to View BoQ information |
