|
| 1 | Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge. |
| 2 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 3 | Filling in foundation and plinth with excavated earth including watering and remming with all leads & lifts including cost, conveyance, royalty, cess & taxes of all materials & cost of all labour & T&P required for the work complete as per direction of Engineer-in-Charge. |
| 4 | Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black broken granite stone metal (C.B) of approved quality and from approved quarry including hosting lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalty, additional charges, DMF 10% & EMF 5% over royalty and all labour, cess with T&P required for the work etc. complete including dewatering if required as per direction of the Engineer-in-Charge. |
| 5 | RCC of design mix of M-250 grade of controlled qulity having cube strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 16/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 10 mm. to 20mm. sizes & proportion as specified in clause-302.6.2 of IRC 21/1987, IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves, fan hooks wherever necessary including cost, conveyance royalties, additional charges, DMF 10% & EMF 5% over royaltyCess and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works)Foundation |
| 6 | Plinth Band |
| 7 | Column(G.F.) |
| 8 | Lintel (G.F.) |
| 9 | Beam(G.F.) |
| 10 | Chajja (G.F.) |
| 11 | Roof Slab (G.F.) |
| 12 | Supply of HYSD bars confirming to approved grade cutting bending , binding, lapping, splicing, welding etc. (conforming to ISI specification ) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance, Cess of tor steel & binding wires of 18 to 20 gauge ( as approved by the Deptt. ) etc. complete (Weight of binding wire shall not be considered for payment at all which will be bome by the contractor (standard CO-efficient of different size of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC - 21/1987) as per direction of the Engineer in charge. |
| 13 | Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, additional charges, DMF 10% & EMF 5% over royalty cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge. |
| 14 | Ground Floor |
| 15 | Supplying,fitting and fixing of M.S. iron grill & grill gate as per approved design specification size including cost of all materials with cost of conveyance, taxes, Cess etc. but excluding labour as per direction of Engineer-in-Charge.Ground Floor |
| 16 | Painting 2 coat with any approved synthetic enamel paint over a coat of primer with brush to wood/iron work including cost, conveyance, taxes of all materials required for the work with all labour, T&P, Cess etc complete in all respect as per specification and direction of Engineer-in-Charge.Ground Floor |
| 17 | Labour for fitting and fixing of Grill Gate etc.complete as per direction of Engineer-in-Charge. |
| 18 | Labour for fitting and fixing of Window Grill including filling the holes with C.C (1:2:4) etc.complete as per direction of Engineer-in-Charge. |
| 19 | Supplyig, fitting and fixing of openable UPVC doors with door frame approved make with 6mm thick glass approved quality complete with frame, shutters and all fitting and fixtures as per specification and direction of Engineer-in-charge. |
| 20 | Supplyig, fitting and fixing of two track UPVC window of approved make with 6mm thick glass approved quality complete with frame, shutters and all fitting and fixtures as per specification and direction of Engineer-in-charge. |
| 21 | 6mm (1/2) thick cement plaster (1:4) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, additional charges, DMF 10% & EMF 5% over royalty, etc. complete in all respect in all floors as per direction of the Engineer in charge. |
| 22 | 12mm (1/2) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, additional charges, DMF 10% & EMF 5% over royalty, etc. complete in all respect in all floors as per direction of the Engineer in charge. |
| 23 | 16mm (5/8) thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities, additional charges, DMF 10% & EMF 5% over royalty etc completed in all respect in all floors as per direction of the Engineer-in-Charge. |
| 24 | Providing, Providing fitting and fixing cutting and cleaning of vetrified Industrial tiles premium grade having thickness using 8 mm to 10mm confirming to IS 4457 of size 300mmx300mm thick with 20 mm thick C.M. (1:4) with neat cement slurry as base coarse for fixing floor tiles including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges. |
| 25 | Providing, Providing fitting and fixing cutting and cleaning of vetrified coloured/printed series (Homogeneous) floor tiles any approved ISI brand to floor not less than (0.600mm x 0.600 mm) using 20 mm thick C.M. (1:4) with neat cement slurry as base coarse for fixing floor tiles including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges. |
| 26 | Supplying,fitting and fixing ceramic tile 30cmx30cm / 40cmx40cm special plain / printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755. Additional charges, DMF @ 10% & EMF @ 5% over the royality and T&P and cess etc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 27 | Supplying,fitting and fixing ceramic tile 20cmx30cm / 20cmx20cm special plain / printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753. Additional charges, DMF @ 10% & EMF @ 5% over the royality and T&P and cess etc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 28 | Providing, Providing fitting and fixing cutting and cleaning of vetrified ivory floor tiles any approved ISI brand to floor not less than (0.600mm x 0.600 mm) using 20 mm thick C.M. (1:4) with neat cement slurry as base coarse for fixing floor tiles including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges. |
| 29 | Finishing wall surface with one coats of acrylic putty with cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge. |
| 30 | Finishing wall surface with two coats with one cot primer of approved quality of weather coat of approved shade over a coat of primer including cost,conveyance, royalities, taxes, cess of all materials, labour, T&P etc.Complete as per direction of Engineer-in-Charge. |
| 31 | Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge. |
| 32 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P, Cess etc. required for the complete as per specification and direction of Engineer-in-Charge. |
| 33 | Providing and applying of pre constructional anti-termite treatment by driling 12mm dia holes at distance of 30cm @ junction of wall and floor about 300mm apart deept enough to reach the soil below ^ chemical emulsion (Premise, imidachlopried 30.5 sc of byer make mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filing materials including cost of all materials, labour, conveyance, T&P all taxes and hire charges of machinaries as per direction of Engineer-in-Charge. |
| 34 | 4.0cm thick grading concrete of proportion (1:2:4) over roof slab using 12mm to 6mm size cb chips of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect and direction of Engineer-in-Charge. |
| 35 | Supply, fitting and fixing of of 5.5 mm thick hexagonal Aluminium jally in windows as single grrove, double grrove and tapered clip as horizontal and vertical members for fixing of aluminium jally and jointing angle confirming to standard section etc. complete in all respect and direction of Engineer-in-Charge. |
| 36 | Providing and fixing roofing consist of 0.8mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100 x 100 mm grid including edge trim overed with concrete. This metal deck will be supported on structural steel beam with shear studs, (Structual steel like beam, Column, Joists etc & concrete of different grade as per design will be paid separately) etc. complete in all respect and direction of Engineer-in-Charge. |
| 37 | Supplying and fixing Wall panelling made of aluminium anodised section frming conforming to standard Aluminium section as horizontal and vertical members with tleast 600mm c/c and fixing of 9mm thick BWR ply and 4mm thick veneer pating finished with melamine polishing complete in all respect and direction of Engineer-in-Charge. |
| 38 | New Gate with Guard Room Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge.Ground Floor |
| 39 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 40 | Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black broken granite stone metal (C.B) of approved quality and from approved quarry including hosting lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalty, additional charges, DMF 10% & EMF 5% over royalty and all labour, cess with T&P required for the work etc. complete including dewatering if required as per direction of the Engineer-in Charge.Ground Floor |
| 41 | RCC of design mix of M-250 grade of controlled qulity having cube strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 16/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 10 mm. to 20mm. sizes & proportion as specified in clause-302.6.2 of IRC 21/1987, IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves, fan hooks wherever necessary including cost, conveyance royalties, additional charges, DMF 10% & EMF 5% over royaltyCess and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works) etc. complete including dewatering if required as per direction of the Engineer-in Charge.Foundation |
| 42 | Plinth Band |
| 43 | Column(G.F.) |
| 44 | Lintel (G.F.) |
| 45 | Beam(G.F.) |
| 46 | Roof Slab (G.F.) |
| 47 | Supply of HYSD bars confirming to approved grade cutting bending , binding, lapping, splicing, welding etc. (conforming to ISI specification ) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance, Cess of tor steel & binding wires of 18 to 20 gauge ( as approved by the Deptt. ) etc. complete (Weight of binding wire shall not be considered for payment at all which will be bome by the contractor (standard CO-efficient of different size of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC - 21/1987) as per direction of the Engineer in charge.Ground Floor |
| 48 | Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, additional charges, DMF 10% & EMF 5% over royalty cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge. |
| 49 | 12mm (1/2) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, additional charges, DMF 10% & EMF 5% over royalty, etc. complete in all respect in all floors as per direction of the Engineer in charge.Ground Floor |
| 50 | 6mm (1/2) thick cement plaster (1:4) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, additional charges, DMF 10% & EMF 5% over royalty, etc. complete in all respect in all floors as per direction of the Engineer in charge.Ground Floor |
| 51 | Finishing wall surface with two coats with one cot primer of approved quality of weather coat of approved shade over a coat of primer including cost,conveyance, royalities, taxes, cess of all materials, labour, T&P etc.Complete as per direction of Engineer-in-Charge.Ground Floor |
| 52 | Supplying,fitting and fixing of M.S. iron grill & grill gate as per approved design specification size including cost of all materials with cost of conveyance, taxes, Cess etc. but excluding labour as per direction of Engineer-in-Charge.Ground Floor |
| 53 | Labour for fitting and fixing of Grill Gate etc.complete as per direction of Engineer-in-Charge.Ground Floor |
| 54 | Painting 2 coat with any approved synthetic enamel paint over a coat of primer with brush to wood/iron work including cost, conveyance, taxes of all materials required for the work with all labour, T&P, Cess etc complete in all respect as per specification and direction of Engineer-in-Charge.Ground Floor |
| 55 | Supplying, fitting and fixing of 100mm dia GI pipe for cowcatcher etc complete with cost ,conveyances , taxes of all materials ,labour , T& P etc. required for the complete in all respect as per specification and direction of Engineer-in-Charge. |
| 56 | Supplying, fitting and fixing of ACP Board including all cost completed as per specification and direction of Engineer-in-Charge. |
| 57 | Providing fitting and fixing cutting and cleaning of vetrified Industrial tiles premium grade having thickness using 8 mm to 10mm confirming to IS 4457 of size 300mmx300mm thick with C.M. (1:4) with neat cement slurry as base coarse for fixing floor tiles including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges. |
| 58 | Supplying,fitting & fixing ceramic tile 20cmx30cm / 20cmx20cm special plain / printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753. Additional charges, DMF @ 10% & EMF @ 5% over the royality and T&P and cess etc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge.Ground Floor |
| 59 | Supplying & fitting - fixing of Openable two track UPVC sliding window of approved make with 6 mm glass of approved quality complete with frame shutters and all fitting and fixtur etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 60 | Supplying & fitting - fixing of Openable UPVC Doors with door frame of approved make with 6 mm glass of approved quality complete with frame shutters and all fitting and fixtures etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 61 | Compound Wall Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge.Ground Floor |
| 62 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 63 | Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black broken granite stone metal (C.B) of approved quality and from approved quarry including hosting lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalty, additional charges, DMF 10% & EMF 5% over royalty and all labour, cess with T&P required for the work etc. complete including dewatering if required as per direction of the Engineer-in Charge.Ground Floor |
| 64 | RCC of design mix of M-250 grade of controlled qulity having cube strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 16/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 10 mm. to 20mm. sizes & proportion as specified in clause-302.6.2 of IRC 21/1987, IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves, fan hooks wherever necessary including cost, conveyance royalties, additional charges, DMF 10% & EMF 5% over royaltyCess and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works) etc. complete including dewatering if required as per direction of the Engineer-in Charge.Foundation |
| 65 | Plinth Band |
| 66 | ColumnGround Floor |
| 67 | Supply of HYSD bars confirming to approved grade cutting bending , binding, lapping, splicing, welding etc. (conforming to ISI specification ) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance, Cess of tor steel & binding wires of 18 to 20 gauge ( as approved by the Deptt. ) etc. complete (Weight of binding wire shall not be considered for payment at all which will be bome by the contractor (standard CO-efficient of different size of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC - 21/1987) as per direction of the Engineer in charge.Ground Floor |
| 68 | Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, additional charges, DMF 10% & EMF 5% over royalty cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge.Foundation |
| 69 | Ground Floor |
| 70 | 12mm (1/2) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, additional charges, DMF 10% & EMF 5% over royalty, etc. complete in all respect in all floors as per direction of the Engineer in charge.Ground Floor |
| 71 | 16mm (5/8) thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities, additional charges, DMF 10% & EMF 5% over royalty etc completed in all respect in all floors as per direction of the Engineer-in-Charge.Ground Floor |
| 72 | Finishing wall surface with two coats with one cot primer of approved quality of weather coat of approved shade over a coat of primer including cost,conveyance, royalities, taxes, cess of all materials, labour, T&P etc.Complete as per direction of Engineer-in-Charge.Ground Floor |
| 73 | Internal Road Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge.Ground Floor |
| 74 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 75 | Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black broken granite stone metal (C.B) of approved quality and from approved quarry including hosting lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalty, additional charges, DMF 10% & EMF 5% over royalty and all labour, cess with T&P required for the work etc. complete including dewatering if required as per direction of the Engineer-in Charge.Ground Floor |
| 76 | Providing cement concerete (1:2:4) nominal mix using 12mm size crusher broken hard granite chips of approved quality obtained from approved quarry including lowering, hoisting & laying in layers not exceeding 150 mm thick each compaction with vibrator, watering and curing for 28 days, centering, shuttering, dewatering if necessary and finishing the exposed surface smooth providing groves and beads where necessary including cost, conveyance royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges Cess & other taxes of all materials, labour hire charges of all T&P machineries required for the work complete in all respect as per specification and direction of Engineer-in Charge. |
| 77 | Construction of Granular sub-base by providing Close graded Granular Sub-base Grading-III material as per table-400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density including cost, conveyance taxes, royality, additional charges, DMF 10% & EMF 5% over royalty cess complete as per direction of the Engineer in charge |
| 78 | Providing, laying and fixing of factory made chamfered \\"Interlocking Concrete Paver Blocks\\" of M-40 grade & 80mm thick of approved shades confirmed to IS:15658-2006 specification over compacted sand bed course of 40mm laid over the properly graded and finished WBM using sand of gradation confirming to Clause-4.4 & 6.5.1 of IRC:SP-63-2004 with uniform moisture content of 6 to 8 per cent (the sand should not be too wet nor too dry) and spread with the help of screed boares and compacted by Plate Vibrator weighing 0.60tonne or more to acheive a compacted thickness of 40mm & local correction, if any required is to be done either by adding or removing the sand followed by further levelling and compacting and filling the gaps between paver blocks (about 3 to 4mm) with dry sand by brooming (the gradation of the filling dry sand should be as per clauses-6.5.2 of IRC:SP:63-2004) including cost, conveyance, royality, additional charges, DMF 10% & EMF 5% over royalty Cess, taxes & technical specification Clause 1501 and as per direction of Engineer-in-Charge. |
| 79 | Dismantling and removing R.C.C. columns, beams, slab, staircase, landing and lintels including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete as per direction of the Engineer in charge. |
| 80 | Dismantling brick or stone masonry in clay under 3mtr height including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete as per direction of the Engineer in charge. |
| 81 | Dismantling brick or stone masonry in clay above 3mtr height including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete as per direction of the Engineer in charge |
| 82 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete as per direction of the Engineer in charge |
| 83 | Removing old grading plaster from roof slab cleaning the surface lowering & removing debris with in 50. m Lead etc. complete as per direction of the Engineer in charge. Please Enable Macros to View BoQ information |
