|
| 1 | (A) Civil Works |
| 2 | Removal of existing iron door and railing (including frames) etc., and useful material has to be handed over to the Yard Civil R&M section and dispose the un-servicable materials with in a 100M lead etc., complete all as directed by HSL |
| 3 | Demolishing of RR/ PCC/ RCC/ Brick wall in Cement mortar by manually / mechanical means including stacking of serviceable material & handing over of useful materials to scrapyard / YCM Civil R&M section and disposal of unserviceable materials with in a 100M lead etc., complete all as directed by HSL |
| 4 | Constrcution of Random rubble masnory with hard stone in superstructure above plinth level; and upto five level, including leveling up with cement concrete 1:6:12 (1 cement :6 coarse sand : 12 graded stone aggregate 20mm nominal size) at required areas, stone issued by HSL to be collected from Colony Maintenance Dept.loading & unloading is in contractor's scope. |
| 5 | Construction of Brick work with common burnt clay F.P.S (Non-Modular) bricks of class designation 7.5 in superstructure above plinth level upto 10M height in all shapes and sizes in cement mortar 1:6 (1 Cement : 6 coarse sand) including cost of cement (PPC - Ramco), required materials and scaffolding / staging etc., complete all as directed. |
| 6 | Applying putty of total thickness 1mm in two coats of approved brands Birla / JK / Asian to wall surfaces at all heights including applying suitable primer after through scrapping, sand papering and cleaning the old paint surface by manually / mechanically including necessary scaffolding and staging where ever required. Putty shall be finished till a smooth and even surface is achieved etc., complete all as directed. |
| 7 | Apply two coats of premium quality arcylic emulsion paint of interior grade of approved brand like Asian paints (Royal shine) / Berger (silky luxury) and manufacture, Including applying additional costs wherever required to achieve even shade and colour. where ever specified by Engineer including necessary scaffolding and staging where ever required etc., complete. |
| 8 | Providing and fixing anodized extruded aluminium partitions with frame 65 x 40 mm with suitable door, part pannelled and part glazed with ACP Panel sheets / pre-laminated flat pressed particle board (NOVAPAN, ECOBOARD etc) of approved colour & make. Aluminium sections shall be powder coated with approved colour of 50 Microns conforming to IS:1948, fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 1.9 ± 0.2 mm wall thickness as per IS:1285, IS:733. Glazing shall be frosted / clear float glass (as per user requirement) of 5 mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures (like tower bolts, hold fast, handles both sides, door stoppers with rubber shoes, 'L'drops, stays etc) with godrej lokcing arrangement for doors including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required. (overall dimesinons will be measured for payment) |
| 9 | Providing and fixing anodized extruded aluminium Two track two panels sliding window made of frame 62 x 30 mm & sash 40 x 20 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension .Glazing shall be frosted / clear float glass (as per user requirement) of 5 mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures etc) and push lock arrangement for windows with staineless steel screws including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required. (overall dimesinons will be measured for payment) |
| 10 | Providing and fixing aluminium work for ventilators with extruded built up standard tubular sections/ appropriate Z sections and other sections of having wall thickness of 1.9 ± 0.2 mm approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 11 | Providing two(2) coats of synthetic enamel paint over a coat of zinc rich primer to wooden surafces / steel surfaces like doors, windows, grills etc., of required colour using approved branded paints like Asian / Berger / Nerolac, after removal of paint on old surface using wire brush or sand paper to give an even shade etc., complete all as directed |
| 12 | Removal of old wooden shutters including frame for doors, Windows, Ventilators etc., without any damage and same has been fixed in position after repairing with suitable materials including all consumables etc., complete all as directed. |
| 13 | Providing and fixing SS die cast body tubular type universal hydraulic door closer of make Godrej or its equivalent (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and SS screws etc. complete all as directed. |
| 14 | Supply & providing 30mm thick flush door shutters of make KALPATHARU confirming to IS 2202 (Part 1) decorative type, solid core of block board construction withput frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( including polishing) ISI marked stainless steel butt hinges, hardware materials like aldrop & tower bolts, door stoppers etc., with necessary screws and complete. |
| 15 | Providing sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length complete as directed by EIC. |
| 16 | Providing and laying 2 mm thick Poly Vinyl flooring to be installed with suitable adhesive etc. Finishing should be smooth without any undulations including all Etc. Complete all as directed by the EIC. |
| 17 | Providing Pointing on stone work with cement mortar 1:3 - flush/ruled pointing, complete all as directed by the Engineer In Charge. |
| 18 | Providing 15mm thick cement plastering of in CM (1:6) over the wall surface etc., including necessary scaffolding, labour, required materials and cement (PPC-Ramco /Ultratech) etc., complete all as directed. |
| 19 | Apply two (2) Coats of Premium quality weather proof Exterior Emulsion paint of required shade to wall surfaces from approved brands Asian Paints (Apex Ultima), Berger (Life 10) as specified by Engineer-incharge including necessary scaffolding etc., complete all as directed. |
| 20 | Providing and fixing false ceiling with 7 mm thick gypsum tile boards of Armstrong / USG Boral-knauf /Rock strength/ GYP EXIM or equivalent make (Equivalent cost & Specifications) of Size 600 x 600 mm of approved texture, design and patterns, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised powder coated iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grains per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L- shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall/ partition with the help of plastic rawl plugs at 50mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications complete all as directed. |
| 21 | Providing plain cement concrete 1:2:4 nominal mix by using 20 mm aggregate and baby chips including mixing, depositing in position, tampering, finishing, curing including all materials & labbour etc., complete all as directed. (Item includes chipping of damaged concrete and dispose to a lead of 50M) |
| 22 | Chipping and removal of old damaged plaster, cleaning the surface thoroughly, applying of Nitobond SBR and plastering with CM (1:4) at beams, parapet wall, lintels, soffits, chajjas, etc including disposal of unserviceable material within 50 metres lead, labour, required scafoldings and materials all complete as per direction of Engineer-in-charge. (NitoBond SBR will be measure and paid seperately) |
| 23 | Disposal of debries, surplus excavated earth, wooden scrap, garbage and rubbish outside the HSL premises to private dumping yard up to 20Km lead (not to dump in HSL colony dumping area & surrounding areas) it is the responsibility of the firm to ensure no objection shall be raised by Muncipal authorities / from any bod. If any dispute arises the agency has to sort out at their own risk etc., complete all as directed. |
| 24 | Supply and providing of Galvanized Iron plain sheet of 1mm thickness as cladding sheet with necessary fittings, scaffoldings complete all as directed by the EIC. (Note:The nature of work is to be carriedout at 0-10M from the Ground level) |
| 25 | Supply, Fabricate and Fixing of Structural steel work using Square, Flat bars for cladding, frame work and fabrication work (to be informed by HSL) including two coat of anticorrosive paint over one coat of primer complete all as directed by the Engineer Incharge. (Note:The nature of work is to be carriedout at 0-10M from the Ground level) |
| 26 | Felling of trees (measured at a height of 1m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable materials and disposal of unserviceable material all as directed by Engineer In Charge. Beyond 30cm girth upto and including 60cm girth. |
| 27 | Supplying, fitting and glazed vitreous china wash basin 550X400mm Size of Jaquar or equivalent (Equivalent cost & Specifications) with central tap hole including supplying and fixing of C.I brackets painted with one coat of approved red oxide Zinc Chromate primer and two coats of approved synthetic enamel paints, 15mm dia Chromium plated approved deluxe head pillar tap of Hindware/Parry or Equalient make, 32mm dia Chrome Plate waste couplings, flexible waste hose, chain rubber plug etc, all as per drawings, specifications and directions of the Engineer, including all materials, tools, plant and labour etc., complete |
| 28 | Providing and fixing 6 mm thick frame less beveled edge mirror of superior glass of approved quality of saint gobin / modi gaurd complete using stain less steel studs including all accessories etc., complete |
| 29 | Supply and providing Stainless steel Coat Hook of make Parryware / Hindware complete all as directed. |
| 30 | Providing and fixing 25 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints (sudhakar/supreme/ prince make) complete as per direction of Engineer in Charge. |
| 31 | Supply of 50 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete. (Item includes removal of old damaged pipe lines and handed over to CE dept.,) |
| 32 | Provision of 75mm dia hole by cutting of existing RR masonry wall by Core cutting machine without damaging the existing wall complete all as directed. |
| 33 | Providing and laying reinforced cement concrete work in nominal mix of 1:2:4 (1 cement : 2 coarse sand (zone-III):4 graded stone aggregate 20mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement and including cost of cement (opc 53 Grade- UltraTech, ACC, Nagarjuna & KCP) and all materials & men etc., complete. |
| 34 | Supply, fit and fix white glazed earthenware European type water closest of Jaquar or equivalent (Equivalent cost & Specifications) with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat and cover with low level cistern of 10 litres capacity of same make as specified including all fittings, materials, tools and labour etc., complete |
| 35 | Providing Indian type Commode (IWC) of approved make Jaquar or equivalent (Equivalent cost & Specifications) including 10 Ltrs Flush Tank and necessary connections etc., after removal the old damaged IWC / EWC and dispose the same to outside the yard, and make it good with cement concrete or Cement mortar complete all as directed. |
| 36 | Supply & Fixing Stainless steel Angle cocks of make Jaquar or equivalent make (Equivalent cost & Specifications) Complete all as directed. |
| 37 | Supply & Fixing Stainless steel two way bib cock with wall flange and all fittings of make Jaquar or equivalent make (Equivalent cost & Specifications) Complete all as directed. |
| 38 | Supply & Fixing Stainless steel long body bib cock with wall flange and all fittings of make Jaquar or equivalent (Equivalent cost & Specifications) Complete all as directed. |
| 39 | Providing & Fixing Stainless Steel floor Grating of Jaquar or equivalent (Equivalent cost & Specifications) Complete with all fittings and fixing arrangements. |
| 40 | Providing and fixing 600mm wide SS Towel rail of standard length of Jaquar or equivalent(Equivalent cost & Specifications) including all accessories etc., complete |
| 41 | Providing Two(2) coats of white washing with suryacem / Hitech gold to walls surfaces after through scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed. |
| 42 | Providing and fixing 1st quality Glazed wall tiles in toilets (on existing walls including hacking of surface) of size 300mmx600mm (Concept) of standard available thickness as per market in floors conforming to IS 15622 of approved make Kajaria / Cera / RAK / Johnson in all colours and shades laid on 20mm thick cement mortar (1:4) (1 cement : 4 coarse sand) in spacing of 2mm by using spacebars or lugs and providing matching epoxy pigment of MYK laticrete / Roff / saint gobain to maintain the level including required materials etc., complete all as directed. |
| 43 | Cleaning of wall tiles, floor tiles with Acid or its equivalent material complete all as directed (After completion of cleaning matching grouting putty is applied to entire toilet room tiles is in contractor scope) |
| 44 | Providing and fixing UPVC Connector pipes for urinals complete all as directed. |
| 45 | (B) Electrical Works: |
| 46 | Supply, fix, test and commissioning of 2X2, 36/39Watt ceiling mounted White LED Light fitting with all accessories (Approved make Wipro/ Jaquar/ philips/ CG/ Havells or Equivalent) |
| 47 | Supply, fix, test and commissioning of 20watt LED Tube light as directed by the engineer incharge. (App .makes CG/Havells/Phillips.) |
| 48 | Consealed PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper cable for two point controlled by one switch as directed. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 49 | Consealed PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper wires run through PVC pipe and all drops and switch boards for One point controlled by one switch.(App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 50 | Supply, fix,test & comissioning of 12 modular type switche board along with gang box and 1no -3pin Modular sockets and switches as directed by engineer incharge. |
| 51 | Supply, fix,test & comissioning of 8 modular type switche board along with gang box and 3nos 5A Modular sockets & switches as directed by engineer incharge. |
| 52 | Supply, fix,test & comissioning of 3 modular type switche board along with gang box and 1nos 6A Modular sockets & switche as directed by engineer incharge. |
| 53 | Supply, fix, test & commissioning of 1phase, 240V, 400 mm sweep Wall mount fan as directed by engineer in-charge. |
| 54 | Supply, fix, test & commissioning of 1phase, 240V, 1200 mm sweep Ceiling fan as directed by engineer in-charge. |
| 55 | Supply, fix, test & Commissioning of 20A DP MCB Double door DB with enclosure for Incoming supply as directed by engineer in-charge.(App.make: Legrand/ABB/Siemens/Schneider) |
| 56 | Supply lay,test and comissioning of 3.5C X 16Sq.mm PVC Armoured Aluminium cable, run along with 8SWG GI wire. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) Please Enable Macros to View BoQ information |
