|
| 1 | Repair & maintenance work at Juvenile Justice Board, Alwar |
| 2 | Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including all scaffolding: Old work (One or more coats ) |
| 3 | Painting exterior surface of Wall with 100% acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of basewith sand papering, primer, putty, etc complete in all respectincluding scaffolding and safety provision Old Work |
| 4 | Repairs to plaster of thickness 12mm to 20mm in patches ofarea 2.5 sq. metres and under including cutting the patch inproper shape, raking out joints and preparing and plasteringthe surface of the walls complete including disposal of rubbishto the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand |
| 5 | Repair to damaged cement plaster of stone chajja with CM 1 :3 of required thickness on top & bottom as per existingpattern and making patta etc complete up to three floor level asper direction of Engineer in charge including all necessaryscoffolding etc |
| 6 | Crazy marble stone flooring 20mm thick marble stone withblack or of specified colour topping including filling the gapswith cement marble chips mix in proportion of 4 : 7 (4cement: 7 white black or white or black marble chips) size from 1mmto 4mm by volume and under layer of 25mm thick cement concrete [1:2:4, graded stone aggregate 12.5mm nominal size] rubbing and polishing and cement slurry etc. complete :In ordinary cement |
| 7 | Half brick masonry in Superstructure , above plinth level uptofloor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 8 | Providing and applying white cement based putty overplastered surface to prepare the surface even and smooth complete v Old Plastered Surface (two or more coats) |
| 9 | Providing and applying plaster of paris putty of 2 mmthickness over plastered surface to prepare the surface evenand smooth complete |
| 10 | Providing and fixing Granite stone slabmirror polished and machine edge cut in walls, pillars, steps, Shelves, SillsCounters,Floorsetc. laidon12mm(Av.)thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2marble dust) with pigment tomatch the shade of themarble slab including grinding, rubbing and polishing complete. Rajasthan Black Above 3601 Cm2 Slabs |
| 11 | Plaster on new surface on walls in cement sand mortar 1:6including racking of joints etc. complete fine finish : 20mm thick |
| 12 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 13 | Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 14 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. |
| 16 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. |
| 17 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix |
| 18 | Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treatedwith anti-termite treatment making grooves painting of grooves specification and drawing using 12mm thick Acoustical Board |
| 19 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 20 | Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm |
| 21 | P & F European type white glazed vitreous china 1st qualityW.C pan (IS : 2556 Mark) with P or S trap including cuttingand making good the wall and floor |
| 22 | P & F WVC Wash basin (Ist quality IS:2556 Mark) ofapproved make with C.I. brackets duly painted 1 No. 15 mmC.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, P.V.C Waste pipe with PVC nut32 mm complete including cutting & making good the wall : Size 550 mm x 400 mm |
| 23 | P & F Bevelled edge Mirror/mirror with teak wood lippingaround of special glass of approved make as per direction ofEngineer-in-charge complete with 6mm thick commercial plybase fixed to wooden screws & washers. Other sizes |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes (IS 15778 : 2007 code) having thermal stability for hot& cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete asper direction of Engineer in Charge. (Concealed workincluding cutting chases and making good the walls etc.,) 15 mm nominal size |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes (IS 15778 : 2007 code) having thermal stability for hot& cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete asper direction of Engineer in Charge. (Concealed workincluding cutting chases and making good the walls etc.,) 25mm nominal size |
| 26 | P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved make and heavy as per direction of Enginner-inCharge |
| 27 | ProvidingandFixingSpun–Cast Ironfloor trap(Nahani)of(IS:3989Markapprovedquality/makewithsocketdownorhinged grating including cutting and making good the floor : Size 100 x 100 mm |
| 28 | P & F Automatic Flushing Cistern of first quality (IS : 774mark) of approved make fitting, siphon with copper tube, C.I.brackets complete including cutting and making good the wall.WVC (as per IS : 2556) 10 litres. |
| 29 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) Size 600mm x 600mm |
| 30 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 31 | P&FBib Cock (IS : 8931Mark), Superior quality ofapproved make:(-do-)Longbody, 15mmnominal boreweight not less than690 gm Please Enable Macros to View BoQ information |
