|
| 1 | Refilling, servicing, testing and refixing of 4.5 Kg CO₂ Type Fire Extinguisher, conforming to relevant BIS specifications and IS 2190, including dismantling, internal and external cleaning, replacement of defective washers, seals, safety pins, discharge horn/hose and other minor components as required, hydraulic pressure testing wherever due, refilling with approved extinguishing media, weighing, leak testing, fixing of service tag/sticker, repainting/touch-up wherever required, refixing the extinguisher at its designated location etc. complete as required. |
| 2 | Refilling, servicing, testing and refixing of 6 Kg ABC Dry Powder Type Fire Extinguisher, conforming to relevant BIS specifications and IS 2190, including dismantling, internal and external cleaning, replacement of defective washers, seals, safety pins, discharge hose/nozzle and other minor components as required, hydraulic pressure testing wherever due, refilling with fresh ABC dry chemical powder, pressurization, weighing, leak testing, fixing of service tag/sticker, repainting/touch-up wherever required, refixing the extinguisher at its designated location etc. complete as required. |
| 3 | Dismantling & repairing of 3 phase, 415 V induction motor i/c supply & replacement of suitable ball bearing- 2Nos., connection plate, varnishing, cartage to & fro, painting reinstallation at site, testing etc complete as required.10 HP (Jockey pump set) |
| 4 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120<135 lm/Watt) Supplying, Replacement, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver asper the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 120 Watt (Ref. DSR 8.13.16) Please Enable Macros to View BoQ information |
