|
| 1 | EXECUTION OF WORK UNDER PROPOSED CONSTRUCTION OF TEMPORARY SCULPTURE SHED FOR PALLAVA GARDEN BADAMI TQ: BADAMI DIST: BAGALKOT |
| 2 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crush edgraded coarse aggregate sand fineaggregate sa sperrelevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates |
| 3 | Providing Thermo-MechanicallyTreatedbarsofgradeFe-500DormoreSteelreinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoringtoadjacentmemberswherevernecessarycompleteasperDesignincludingcost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) |
| 4 | Additionalitiesforformwork,centringandScaffolding(Percentageonfinishedrateof concrete per cum) |
| 5 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smoothrendering, providing and removing scaffolding ,including cost of materials,labour,curingcom |
| 6 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery comp |
| 7 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet was hers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces),excludingthecostofpurlins,raftersandtrussesandincluding cutting to size and shape wherever required as per the direction of Engineer In charge |
| 8 | ProvidingandlayingCementconcreteflooring40mmthickwith20mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4gradedstoneaggregate)finishedwithafloatingcoatofneat,cementincludingofcement slurry |
| 9 | Providingand Fixing O fAluminum Windows |
| 10 | Providingandfixing1mmthickMSSheetDoorandframeof40X40X60mmangleironand 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. |
| 11 | Finishing walls with Acrylic Smooth exterior pain to frequired shade :New work([email protected]/10m²overandincludingprimingcoatof exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all irt,dust,mortardropsandforeignmatterincludingpreparingthesurface even and sand paper smooth, cost of materials, labour complete as per specifications and as perdirectionsofEngineer-in-charge. |
| 12 | 5% Area Weightage |
| 13 | GST 18% Please Enable Macros to View BoQ information |
