|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix) |
| 2 | Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all leads (wooden/concrete joists to be measured and paid for separately) For all thickness of tiles including carriage of materials in all leads and lifts |
| 3 | Dismantling wooden boarding and plywoods in partition and cupboards excluding supporting members but including stacking with in 50 metres lead thickness above 10 mm upto 25 mm |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) complete including carriage of materials in all leads and lifts |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, alconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts |
| 7 | Providing Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding,cutting and placing in position complete including cost of binding wires completed and other incidentals due for its completion for all floors, within all leads and lifts of materials and other incidentals. Above plinth level upto all floor level |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick |
| 9 | Brick work using common burnt clay building bricks in foundation and plinth Cement in Mortar 1:6 (1 Cement : 6 Sand).Second Class Bricks including carriage of materials within all leads and lifts |
| 10 | Stone soling with kharanja stone including filling the voids with stone spalls and ramming etc. complete as per the direction of Engineer-in-charge complete including ramming, watering and consolidating upto all leads and lifts |
| 11 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 12 | Making rounded/ half rounded nosing in granite/kota stone complete. 20mm thick including carriage of materials within all leads and lifts |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 2nd class Deodar wood |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Deodar wood wood 35 mm thick shutters |
| 15 | Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 g with wire of dia 0.56 mm to windows and clerestory windows including required beading complete including carriage of materials within all leads and lifts |
| 16 | Providing and fixing commercial plywood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carrage of material within all leads and lifts. :- 6 mm thick |
| 17 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts |
| 18 | Providing and fixing 19mm thick Commercial Board shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts |
| 19 | Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts |
| 20 | Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts |
| 21 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm |
| 22 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200mm x 10mm |
| 23 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm |
| 24 | Providing and fixing 250x10mm Ess-Ess tower bolts of approved colour & shade with necessary screws etc. complete including carriage of materials within all leads and lifts |
| 25 | Providing and fixing Ess-Ess handles of approved colour & shade with necessary screws etc. complete including carriage of materials within all leads and lifts (i) 250MM |
| 26 | (ii) 200mm |
| 27 | (iii)150mm |
| 28 | Providing and fixing Ess-Ess eye hook of approved colour and shade with necessary screws etc. complete including carriage of materials in all leads and lifts |
| 29 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. .including carriage of material in all leads and lifts |
| 30 | Providing and fixing E- Type aluminium channel for sliding shutters of cupboard, including cutting to required length, proper positioning and alignment, fixing in position with suitable screws/fasteners, ensuring smooth sliding of shutters, complete including carriage of materials in all leads and lifts |
| 31 | Providing and fixing telescopic drawer slides (keyboard sliding channels) for keyboard tray, including fixing in position with suitable screws/fasteners, proper alignment, ensuring smooth and noiseless sliding operation, complete including carriage of materials in all leads and lifts |
| 32 | Providing and fixing recessed/sleek aluminium handle for sliding shutters, including making necessary cut-out in shutter, proper fitting and fixing in position, finishing the edges smoothly, complete including carriage of materials in all leads and lifts |
| 33 | Providing and fixing Godrej make mortice/latch lock in cupboard/ door, including making necessary recess in shutter and frame, proper fitting and fixing in position with all required screws, keys, handles, and accessories, ensuring smooth operation complete including carriage of materials in all leads and lifts |
| 34 | Providing and fixing Shadex make window blinds (Zebra), including supply of all components, fittings, brackets and accessories, fixing in position with proper alignment, ensuring smooth operation, complete |
| 35 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Electric resistance or induction butt welded tubes |
| 36 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) |
| 37 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 38 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(i)With float glass panes of 5.00 mm thickness weight not less than 12.50 kg / sqm |
| 39 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides |
| 40 | Providing and fixing plain, polished chequered tiles 22mm thick of approved shade and patternlaid in floors, treads of steps and landings on a bed of 25mm average thickness of cement mortar 1:6(1cement:6sand) jointed with neat cement slury mixed with pigment to match the shade of tiles (wherever required) including rubbong and polishing complete with tiles of grey shade including carriage of materials within all leads and lifts |
| 41 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm |
| 42 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 43 | Providing and fixing M.S welded mesh 25x25x3mm to angle iron frame work complete including welding by electric plant and including applying a priming coat of red lead paing and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts |
| 44 | Providing and fixing M.S. BP Sheet 1.66 mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge & including carriage of materials in all leads and lifts. (Base members of steel work shall be measured & paid separtely) |
| 45 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth InCement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts |
| 46 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts |
| 47 | Wall painting with plastic emulsion paint Two or more coats applied on New work of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface. including carriage of materials in all leads and lifts |
| 48 | Providing and applying white wood based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 49 | Painting wood work with Deluxe Multi Surface Paint of required shade Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 50 | Painting steel work with Deluxe Multi Surface Paint of required shade Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 51 | Finishing walls with Acrylic Smooth exterior paint (Apex ultima) of required shade : (New work Two or more coats applied) complete including carriage of materials in all leads and lifts |
| 52 | Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved Please Enable Macros to View BoQ information |
