|
| 1 | Ground FloorEarth work in foundation in hard soil or gravelly soil within 50m intial lead and lifts 1.5 M intial lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site including cost of all labour, T and P and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries, T and P required for the work etc. complete in all respect as per direction by the Engineer-in-charge. |
| 3 | Providing and laying (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and sand of approved quality and from approved quarry including laying concrete in layers not exceeding 15cm in depth, ramming, watering and curing etc. complete to required levels including cost, conveyance, royalties, taxes of all materials and cost of all labours, T and P etc complete as per the direction of the Engineer in charge. |
| 4 | Fly ash brick masonry in cement mortar (1:6) using bricks of 23cm size having a crushing strength of not less than 75 kg per Sq.cm, after immersing Bricks for six hours in waters before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T and P etc. complete in all respect as directed by the Engineer-in-charge.Foundation & Plinth |
| 5 | Fly ash brick masonry in cement mortar (1:6) using bricks of 23cm size having a crushing strength of not less than 75 kg per Sq.cm, after immersing Bricks for six hours in waters before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.Superstructure |
| 6 | Fly ash brick masonry in cement mortar (1:6) using bricks of 23cm size having a crushing strength of not less than 75 kg per Sq.cm, after immersing Bricks for six hours in waters before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T and P etc. complete in all respect as directed by the Engineer-in-charge.Superstructure |
| 7 | RCC work of M-20 grade in the Structural building works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including all taxes in complete A) Footing Column |
| 8 | B) Plinth Band |
| 9 | C) Column/ Roof Beam |
| 10 | D) Roof Slab |
| 11 | E) Lintel |
| 12 | F) Chajjah |
| 13 | Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD FE-550 steel of approved manufacturer as per section 1600 and section 1900 of MORT and H specification for Road and Bridge works 4th revision including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment |
| 14 | 12 mm thick Cement Plaster 1:6 finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 15 | 16 mm thick Cement Plaster 1:6 finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 16 | Supplying ,fitting,fixing of all types of M.S Angle Iron grills for Door or Window made of ISI marked standard MS Angles with MS sheets of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, automatic door closers, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 17 | a)Door |
| 18 | Providing and fixing 65mm X 125mm factory made single extruded WPC Wood Polymer Composite solid door or window or Ceosetory windows and other Frames or Chowkhat comprising of virgin PVC polymer of K value 58-60 Suspension Grade, calcium carbonate and natural fibers wood powder or rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg or cum, screw withdrawal strength of 2200 N Face and 1100 N Edge, minimum compressive strength of 58 N or mm2, modulus of elasticity 900 N or mm2 and resistance to spread of flame of Class A category with property of being termite or borer proof, water or moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 19 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete |
| 20 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride UPVC FENESTA or NCL VEKA LTD. Ventilator or Top Hung-60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. (V) etc complete as per direction of Engineer-in-Charge. |
| 21 | Priming one coat with approved Red Oxide Primer on Iron work, steel work painting 2 coats with approved paint in iron works including sand papering, polishing surfaces, cost of paints, cost of all labour, T and P etc complete in all floors as per direction of E.I.C. |
| 22 | Priming one coat with wall primer water bond cement primer including all labour, material, T and P etc. complete. |
| 23 | Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall with cost, conveyance, royality, taxes of all materials and labour with T and P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge. |
| 24 | Finishing wall surfaces with cement based putty water based of approved quality for making smooth even to receive painting including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 25 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 26 | Supplying, fitting and fixing Vertified Tile 600mm x 600mm coloured or printed series of approved make conforming to is:13755 laid on 20mm thick cement mortar 1:4 1 cement :4 course sand and filling joints with white cement of approved quality including cost of all materials, labour T and P etc required for the work all complete as per direction of Engineer-In- Charge |
| 27 | Supplying, fitting and fixing of Vertified Tile 600mm x 600mm coloured or printed series of approved make in dadoes, skirting laid on 12 mm thick cement mortar 1:3 1 cement : 3 course sand jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T and P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 28 | Supplying and filling in foundation and plinth with excavated earth well watered and rammed including cost, cost of all labour, carriage, royalty, taxs , T and P etc complete. |
| 29 | 2.5 cm thick A.S flooring with Cement Concrete of proportion 1:2:4 including punning using 12mm size hard black crusher broken granite stone chips of crusher broken of approved quality from approved quarry, rounding the comers, using required quantity of water proofing compound where necessary, including watering and curing bwith cost, conveyance, royalty and taxes of all materials with all labour with T and P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 30 | GEDRecessed wirring to light point or fan point or exhaust fan point or call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex or Anchor or Polycab or HAVELLS or RR KABLE or KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG or BEC or Precision or Norpak or Anchor or Kinjal 6A modular type anti bactorial and flame retradant type switch ISI marked Make-Schneider Zencelo or legrand Myrius-NEXT GEN or Panasonic vision and ceiling rose ISI marked of modular type G.I box with metallic cover plate both side anti bactorial and flame retradant type Make-Schneider Zencelo or legrand Myrius-NEXT GEN or Panasonic vision of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.Group A |
| 31 | GROUP-B |
| 32 | GROUP-C |
| 33 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch and socket modular type anti bactorial and flame retradant type and other required accessories of ISI marked as approved as per direction of Engg-in-Charge. Make-Schneider Zencelo or legrand Myrius-NEXT GEN or Panasonic vision. |
| 34 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch and socket modular type anti bactorial and flame retradant type with suitable size modular box and cover anti bactorial and falme retradant type including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.Make-Schneider Zencelo and legrand Myrius-NEXT GEN Panasonic vision . |
| 35 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch and socket modular type anti bactorial & flame retradant type with suitable size modular box and cover(anti bactorial and flame retradant type including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider Zencelo or legrand or Myrius-NEXT GEN or Panasonic vision or or For equipement power. |
| 36 | Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch anbd socket modular type anti bactorial & flame retradant type with suitable size modular box and metallic cover plate both side anti bactorial falme retradant type including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.Make-Schneider Zencelo or legrand Myrius-NEXT GEN or Panasonic vision For equipement power |
| 37 | Receass wiring for circuit or submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex or Anchor or Polycab or HAVELLS or RR KABLE or KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG or BEC or Precision or Norpak or Anchor Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit LDB to LSB LIGHT CKT 2X1.5+1X1.5 |
| 38 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex or Anchor or Polycab or HAVELLS or RR KABLE or KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG or BEC or Precision or Norpak or Anchor or Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. or BDB to LSB or LIGHT CKT or 5A PLUG or UPS POINT 2X2.5+1X1.5 |
| 39 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex or Anchor or Polycab or HAVELLS or RR KABLE or KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG or BEC or Precision or Norpak or Anchor or Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. PDB to PSB or POWER POINT or AC POINT 2X4+1X1.5 |
| 40 | 4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit. 4X6+2X4 |
| 41 | Receass wiring for circuit or submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex or Anchor or Polycab or HAVELLS or RR KABLE or KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG or BEC or Precision or Norpak or Anchor or Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .LFDB TO LBDB or UBDB 2X6+1X2.5 |
| 42 | Supplying and installation of 25A AC starter Modular type, Schneider or Siemens or Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge . |
| 43 | Supply and fixing CALL bell Ding dong type or Buzzer on the existing switch box or cover.Make- Make-Schneider Zencelo or legrand Myrius-NEXT GEN or Panasonic vision .as required as per direction of Engg.-in-Charge. |
| 44 | S and F of Bakelite angle holder or batten holder or make-Anchor or Havells or equievalant reputed make A catagory ISI marked as approved of ISI marked conforming to IS-1258 or 1987 in place of ceiling rose as per direction of Engg.-in-Charge |
| 45 | Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side and duly bent to accommodate ceiling fan down rod bolt and having earthing arrangement as per direction of Engineer-in-charge. |
| 46 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .(Note More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 47 | S and F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge Make-Schneider Zencelo or legrand Myrius-NEXT GEN or Panasonic vision. |
| 48 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers Make- Havells or Crompton or Usha or Orient or Bajaj of exhaust fan in the existing wall, including fixing and conntection as required as per direction of Engg.-in-Charge. |
| 49 | S and F of Wall Mounted Fan including all accessories of USHA Mist Air Icy Blue or Crompton Wall Mounted Fan-High Flo LG 18 make and connection as per direction of Engineer-in-charge. |
| 50 | S and F of 600 mm high speed Ceiling Fan with fixing including all accessories of USHA or Bajaj or Crompton or Havellsmake and connection as per direction of Engineer-in-charge. |
| 51 | Supplying, installation, testing and commssioning of 1200 mm sweep white or milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater then 215m3 or min Make-Crompton Energion Groove or Havells Efficiencia Neo or Usha Technix including wiring the down rod of standard length upto 30 cm with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg-in-Charge |
| 52 | Supply and fixing of 9Watt LED Lamp Philips or Havells or AnchorBajaj or Equivalent make with connection, painting etc as required. |
| 53 | S and F of B.H fitting energy saving,surface mounted decorative round plastic bulk head 1x10Wt LED luminaires comprising high brightness LED with IP54 protection. ELIPSE ROUND or ELIPSE OVAL |
| 54 | S and F of 1x45W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection Havells makeENDURA SUNDOWN or Crompton VEGA or FREEDOM NEO |
| 55 | Supplying and fixing of Energy efficient surface or recess mounted square or round shape 18 W LED luminaire of dimension of consists of white powder coated, die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, CRI not less than 80,CCT of 6000 degree K,THD less than 10 Percent, with electronic driver, internal surge protection of 3 KV, L70 B50 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj. |
| 56 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj. |
| 57 | 4 Way 8+12 Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door . |
| 58 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3 or Siemens-Betaguard or Schneider- Acti 9 or ABB SB 200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year. |
| 59 | Supplying and fixing 40Amps rating,C series,10KA breaking capacity, 4P 415 volts MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 . the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year. ( For LDB & Floor UPS DB) |
| 60 | Supplying and fixing 40A/63Amps 4P 415 volts RCCB 30 mA of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge.Warranty on MCB is 1 year.( For PDB & LDB) |
| 61 | (Earthing Installations)Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. |
| 62 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 63 | S/F of 10 sq.mm 2 Core Alluminium, armoured LT power Cable main insulated 650/1100 grade(make-Havells/Polycab) |
| 64 | Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS 2878 made from ISI marked seamless cylinder confirming to IS 7285, fitted with ISI marked controlled valve confirming to IS 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. Make-Safex/Fireshield/Ceasefire/FLAMEKLOG |
| 65 | Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete. Make-Safex/Fireshield/Ceasefire/FLAMEKLOG |
| 66 | G.P.HProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge A)20mm dia C - PVC pipe SDR - 11 |
| 67 | 25mm dia C - PVC pipe SDR - 11 |
| 68 | 32mm dia C - PVC pipe SDR - 11 |
| 69 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.a)15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 70 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 71 | 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) |
| 72 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 73 | 25mm dia brass full way valve (Shakti make) |
| 74 | 32mm dia brass full way valve (Shakti make) |
| 75 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 76 | 15mm CP Extension piece |
| 77 | 125mm CP grating |
| 78 | 15mm size C.P. flange |
| 79 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge a)1000 liters capacity PVC water storage tank |
| 80 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 81 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 82 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 83 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. a)110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 84 | b)110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 85 | c)110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 86 | d)110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 87 | e)110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 88 | f)110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 89 | g)110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 90 | h)110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 91 | i)110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 92 | j)110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 93 | k)110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 94 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI p or s trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.a)580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 95 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargea)10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 96 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge |
| 97 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal-630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 98 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargea)European water closet with p trap plain (Hindware/ Parryware/ Neycer make) |
| 99 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargea)550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 100 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargea)25mmx600mm long CP towel rail |
| 101 | b)Towel ring |
| 102 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.A)600mmx125mm plate glass shelf with CP/NP guard rails. |
| 103 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.A)600mmx450mm size B.E mirror (swivelled type) |
| 104 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargea)CP soap holder |
| 105 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 106 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 107 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargea)Inside size 76cmx76cmx46cm with 18 dia RCC MH cover |
| 108 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 109 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 110 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge - 5.76 x 0.10 |
| 111 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge - 5.76 x 0.10 |
| 112 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx30cm special printed series to be pre-approved by the Engineer-in-charge )a)Kajaria/Somany/Johnson tile 60cmx30cm |
| 113 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 114 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx60cm special plain / printed series to be pre-approved by the Engineer-in-charge )a)Kajaria/Somany/Johnson tile 60cmx60cm |
| 115 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 116 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge |
| 117 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in chargea)100mm dia P.V.C. pipe Please Enable Macros to View BoQ information |
