|
| 1 | Cable |
| 2 | 2.5 sq.mm submersible cable three core (copper) ISI mark |
| 3 | 4 sq.mm submersible cable three core (copper) ISI mark |
| 4 | 6 sq.mm submersible cable three core (copper) ISI mark |
| 5 | 10 sq.mm submersible cable three core (copper) ISI mark |
| 6 | 16 sq.mm submersible cable three core (copper) ISI mark |
| 7 | 25 sq.mm submersible cable three core (copper) ISI mark |
| 8 | 35 sq.mm submersible cable three core (copper) ISI mark |
| 9 | Cable with aluminum armored 3 core 50sqmm |
| 10 | Cable with aluminum armored 3 core 70sqmm |
| 11 | Fuse Cut Out |
| 12 | 16 Ampere |
| 13 | 32 Ampere |
| 14 | 63 Ampere |
| 15 | 100 Ampere |
| 16 | 150 Ampere |
| 17 | 200 Ampere |
| 18 | 300 Ampere |
| 19 | Fuse Wire |
| 20 | 16 Ampere |
| 21 | 32 Ampere |
| 22 | 63 Ampere |
| 23 | 100 Ampere |
| 24 | M.C.C.B L &T Make |
| 25 | 16 Ampere |
| 26 | 32 Ampere |
| 27 | 63 Ampere |
| 28 | 100 Ampere |
| 29 | 150 Ampere |
| 30 | 200 Ampere |
| 31 | 250 Ampere |
| 32 | 300 Ampere |
| 33 | 500 Ampere |
| 34 | H.R.C.Fuse |
| 35 | 16 Ampere |
| 36 | 32 Ampere |
| 37 | 63 Ampere |
| 38 | 100 Ampere |
| 39 | 150 Ampere |
| 40 | 200 Ampere |
| 41 | 250 Ampere |
| 42 | 300 Ampere |
| 43 | 500 Ampere |
| 44 | Main switch 3 Pole |
| 45 | 16 Ampere |
| 46 | 32 Ampere |
| 47 | 63 Ampere |
| 48 | 100 Ampere |
| 49 | 150 Ampere |
| 50 | 200 Ampere |
| 51 | 250 Ampere |
| 52 | Providing and erecting transformer new AB switch complete set. |
| 53 | L.T. L.K. MK -1 Dol Starter 3 H.P./5 H.P. |
| 54 | No Volt Coil |
| 55 | contact patti set |
| 56 | Relay |
| 57 | contact block |
| 58 | New Starter Set for 3 H.P./5 H.P. |
| 59 | 15/10 H.P. Starter /Star Delta Starter (L&T make Mk-1) |
| 60 | No Volt Coil |
| 61 | contact patti set |
| 62 | Relay |
| 63 | contact block |
| 64 | New Starter Set for 10 H.P./15 H.P. Mk -1 |
| 65 | New Starter Set for 10 H.P./15 H.P. MU-G20 |
| 66 | Contactor |
| 67 | MNX -225 |
| 68 | MNX -110 |
| 69 | MNX -A2 |
| 70 | MNX -A1 |
| 71 | MNX -25 |
| 72 | MNX -9 |
| 73 | ML -2 |
| 74 | ML -4 |
| 75 | Oil starter 50 H.P. |
| 76 | Contact Fix Patti |
| 77 | Contact Moving Point |
| 78 | No Volt Coil |
| 79 | Fibre plate |
| 80 | Conection Plate |
| 81 | STARTE MINOIR REPAIRING |
| 82 | Supplying & erecting new connection terminal beckelite connection plate with copper lugs & copper nut bolt for 50 HP |
| 83 | L&T CO2-200 COS - 200A |
| 84 | L&T Thermal overload relay MN 12 CT ratio 30 |
| 85 | Single phase preventor Minilec make |
| 86 | L&T Capacitor 1/3 Phase |
| 87 | L&T Main switch DN-3 630 D |
| 88 | L&T MCCB DN-2 250A |
| 89 | L&T MCCB DU-250 |
| 90 | Relay 30A- 50A |
| 91 | Relay 20A- 33A |
| 92 | FN 100 TPN Switch disconnector Fuse Unit |
| 93 | L&T Make FASD starter ML 1.5 Suitable for 10/15 Hp |
| 94 | 50 H.P.ATS Starter |
| 95 | Timer |
| 96 | Auxiliary Switch |
| 97 | ON OFF switch |
| 98 | No Volt Coil |
| 99 | MONIR REPAIRING |
| 100 | 80 H.P. ATS Starter |
| 101 | Timer |
| 102 | Auxiliary Switch |
| 103 | ON OFF switch |
| 104 | MONIR REPAIRING |
| 105 | 100 H.P. ATS Starter |
| 106 | Timer |
| 107 | Auxiliary Switch |
| 108 | ON OFF switch |
| 109 | MONIR REPAIRING |
| 110 | Aluminium Lugs |
| 111 | 16 mm |
| 112 | 25 mm |
| 113 | 35 mm |
| 114 | 50 mm |
| 115 | 70 mm |
| 116 | 95 mm |
| 117 | 120 mm |
| 118 | 150 mm |
| 119 | 185 mm |
| 120 | 240 mm |
| 121 | 300 mm |
| 122 | Copper Lugs |
| 123 | 16 mm |
| 124 | 25 mm |
| 125 | 35 mm |
| 126 | 50 mm |
| 127 | 70 mm |
| 128 | COPPER Bus Bar |
| 129 | Crimping Tool Manual |
| 130 | Crimping Tool Hydraulic Operated |
| 131 | Transformer Bush HV/LV 63/100/160/ KVA |
| 132 | Transformer Rod HV/LV 63/100/160 KVA |
| 133 | Transformer oil Filter |
| 134 | Transformer New oil Filling (filtered) |
| 135 | Rewinding Of Motors |
| 136 | 1 HP El. Motor (Mono Block) Rewinding with Material and labour |
| 137 | 3 HP El. Motor (Mono Block) Rewinding with Material and labour |
| 138 | 5 HP El. Motor (Mono Block) Rewinding with Material and labour |
| 139 | 10 HP El. Motor (Mono Block) Rewinding with Material and labour |
| 140 | 15 HP El. Motor (Mono Block) Rewinding with Material and labour |
| 141 | 1 HP El. Motor (Submersible) Rewinding with Material and labour |
| 142 | 2 HP El. Motor (Submersible) Rewinding with Material and labour |
| 143 | 3 HP El. Motor (Submersible) Rewinding with Material and labour |
| 144 | 5 HP El. Motor (Submersible) Rewinding with Material and labour |
| 145 | 7.5 HP El. Motor (Submersible) Rewinding with Material and labour |
| 146 | 10 HP El. Motor (Submersible) Rewinding with Material and labour |
| 147 | 15 HP El. Motor (Submersible) Rewinding with Material and labour |
| 148 | 20 HP El. Motor (Submersible) Rewinding with Material and labour |
| 149 | 30 HP El. Motor (Submersible) Rewinding with Material and labour |
| 150 | 35 HP El. Motor (Submersible) Rewinding with Material and labour |
| 151 | 80 HP El. Motor (Submersible Pump ) Rewinding with Material and labour |
| 152 | 100 HP El. Motor (Submersible) Rewinding with Material and labour |
| 153 | 3 HP El. Motor (Submersible Mono Block) Rewinding with Material and labour |
| 154 | 5 HP El. Motor (Submersible Mono Block) Rewinding with Material and labour |
| 155 | 7.5 HP El. Motor (Submersible Mono Block) Rewinding with Material and labour |
| 156 | 10 HP El. Motor (Submersible Mono Block) Rewinding with Material and labour |
| 157 | 15 HP El. Motor (Submersible Monoblock) Rewinding with Material and labour |
| 158 | 30 HP El. Motor (Submersible Mono block) Rewinding with Material and labour |
| 159 | 50 HP El. Motor (VT Pump ) Rewinding with Material and labour |
| 160 | 2 HP Mud Pump Set (Vertical) Rewinding with Material and labour |
| 161 | 3 HP Mud Pump Set (Vertical) Rewinding with Material and labour |
| 162 | 5 HP Mud Pump Set (Vertical) Rewinding with Material and labour |
| 163 | 10 HP Mud Pump Set (Vertical) Rewinding with Material and labour |
| 164 | 15 HP Mud Pump Set (Vertical) Rewinding with Material and labour |
| 165 | Minor Repairing/ Overhauling of pumps |
| 166 | 1 HP Pump |
| 167 | 2 HP Pump |
| 168 | 3 HP Pump |
| 169 | 5 HP Pump |
| 170 | 10 HP Pump |
| 171 | 15 HP Pump |
| 172 | 30 HP Pump |
| 173 | 80 HP Pump |
| 174 | Repairs and maintenance 50HP VT pump for Igatpuri city water supply scheme Vertical turbine pump (water lubricated) incliding dowl assembly and discharge hed etc. on provided channel/RSJ/RCC beam including erecting on providing sole plate with blue matching |
| 175 | a) removing |
| 176 | b) Dismenting |
| 177 | Bowl assembly loading, unloading, scrapping & cleaning, checking the bowl assembly… etv complete |
| 178 | Making bowl shaft remetalising, machining, impeller fiting size machining… etc complete |
| 179 | Making bowl bush bronze metal machining pressing thrugh & boaring… etc complete. |
| 180 | Making impeller and impeller neck ring through cut& balancing work… etc complete. |
| 181 | Making bowl body neck ring machining as per required impeller size… etc complete. |
| 182 | Making impeller collet and lock machining and fitting… etc complete. |
| 183 | Making new strainer with stainless steel jail… etc complee |
| 184 | Supplying misc sundry & hardware material like new nut bolt gasket packing and gland packing… etc complete. |
| 185 | Making threading work for line shaft of 5ft length and facing through polish… etc complete. |
| 186 | Making line shaft new coupling as sleeve reconditioning and thrugh polish… etc complete. |
| 187 | Making gland shaft stainless steel remetalising machining and through polish… etc comlete. |
| 188 | Making old (GM) impeller nackring repairing on lathe machine work…etc complete. |
| 189 | Bowl assembly, dismentaling & removing al parts and re-installing property labour charges. |
| 190 | Making new line shaft 316 materal including of lathe machining work. |
| 191 | Making rubber bush reconditioning…etc complete. |
| 192 | Providing and erecting new rubber spider. |
| 193 | Making 250mm column pipe-each 5 feet length scrapping & de rusting colouring and painting work…etc complete |
| 194 | Transportation of dismantled parts of pump fom raw water pumping to nashik work shop including loading unloading…etc complete |
| 195 | Transportation of dismantled parts of pump after repairing from nashik work shop to raw water pumping site with loading unloading …etc complete |
| 196 | assembling and re-erection of 50HP VT pump set at actual site. |
| 197 | Supplying & erecting new coupling set with nut bolts and rubber. |
| 198 | Supplying & erecting new line shaft s.s lenght – 5 feet. |
| 199 | Supplying & erecting new line shaft coupler |
| 200 | Supplying & erecting new line shaft sleeve |
| 201 | Supplying & erecting new bowl shaft |
| 202 | Repairs and Maintenance 50HP VHS Electric motor for |
| 203 | a) Removing 50 HP VHS electric motor |
| 204 | b) dismantling 50 HP VHS electric motor |
| 205 | Transportation of above motor form Nashik work shop site to raw water pumping including loading & unloading with tools & tackles etc complete |
| 206 | Rewinding and repairs of squirrel cage including motors 440 v,3 phase 50 cycles/sec, 1500 RPM with b class insulation including heating, oven baking varnishing, painting etc complete. (60 HP motor) |
| 207 | Supplying taper roller bearing FAG x-LIFE 29326 |
| 208 | Supplying ball bearing 6320 |
| 209 | Supplying gland packing 20 mm |
| 210 | Supplying champion packing 3M x 200M |
| 211 | a) Assembling 50HP VHS electric motor |
| 212 | b) re- erection of 50HP VHS electric motor |
| 213 | Transportation of dismantled parts of pump after repairing from Nashik work shop to raw water pumping site with loading unloading …etc complete |
| 214 | Supplying & erecting new connection terminal backlit connection plate with copper lugs & copper nut bolt for 60HP motor |
| 215 | Supplying copper lugs 70sq.mm |
| 216 | 3 HP MotorPump Replacement of bearing (Submersible/MonoBlock) |
| 217 | 5 HP MotorPump Replacement of bearing (Submersible/MonoBlock) |
| 218 | 10 HP MotorPump Replacement of bearing (Submersible/MonoBlock) |
| 219 | 15 HP MotorPump Replacement of bearing (Submersible/MonoBlock) |
| 220 | 30 HP MotorPump Replacement of bearing (Submersible/MonoBlock) |
| 221 | 80 HP MotorPump Replacement of bearing (Submersible/MonoBlock) |
| 222 | 100 HP MotorPump Replacement of bearing (Submersible/MonoBlock) |
| 223 | 50 HP Motor Pump Replacement of bearing (Turbine Pump Upper Bearing ) Bearing No. 7317 BEP |
| 224 | 50 HP Motor Pump Replacement of bearing (Turbine Pump Lower Bearing ) Bearing No. 6212 |
| 225 | Minor Repairing of Electric Panels |
| 226 | 5 HP Pump Panel |
| 227 | 10 HP Pump Panel |
| 228 | 15 HP Pump Panel |
| 229 | 30/35 HP Pump Panel |
| 230 | 50 HP Pump Panel |
| 231 | 75/80/85 HP Pump Panel |
| 232 | Repairing Of 50 HP VFD Panel (Minor) |
| 233 | Repairing Of 50 HP VFD Panel (Major) |
| 234 | Repairing Of 80 HP VFD Panel (Minor) |
| 235 | Repairing Of 80 HP VFD Panel (Major) |
| 236 | Rewinding Of Tranformer 63 KVA |
| 237 | Rewinding Of Tranformer100 KVA |
| 238 | Rewinding Of Tranformer 160 KVA |
| 239 | Supply & Installation Of New Tranformer 63 KVA |
| 240 | Supply & Installation Of New Tranformer 100 KVA |
| 241 | Supply & Installation Of New Tranformer 160 KVA |
| 242 | Supply & Installation Of New 0.5 HP Motor Monoblock ( Crompton/Kirloskar/ABB) |
| 243 | Supply & Installation Of New 0.5 HP Pistion Pump Set |
| 244 | Supply & Installation Of New 3 HP MotorPump set Monoblock (Crompton/Kirloskar/Texmo) |
| 245 | Supply & Installation Of New 5 HP Motor Pump Set Monoblock (Crompton/Kirloskar/Texmo) |
| 246 | Supply & Installation Of New 5 HP Motor Open well Sub mersible Mono BLock (Horizontal ) (Crompton/Kirloskar/Texmo) |
| 247 | Supply & Installation Of New 5 HP Motor Sub mersible (Vertical) (KSB/Kirloskar/Lubi/ CRI) |
| 248 | Supply & Installation Of New 10 HP Motor Pump Set Monoblock (Crompton/Kirloskar/Texmo) |
| 249 | Supply & Installation Of New 10 HP Motor Open well Sub mersible Mono BLock (Horizontal ) (Crompton/Kirloskar/Texmo) |
| 250 | Supply & Installation Of New 10 HP Motor Sub mersible (Vertical) (KSB/Kirloskar/Lubi/ CRI) |
| 251 | Supply & Installation Of New 15 HP Motor Pump Set Monoblock (Crompton/Kirloskar/Texmo) |
| 252 | Supply & Installation Of New 15 HP Motor Open well Sub mersible Mono BLock (Horizontal ) (Crompton/Kirloskar/Texmo) |
| 253 | Supply & Installation Of New 15HP Motor Sub mersible (Vertical) (KSB/Kirloskar/Lubi/ CRI) |
| 254 | Supply & Installation Of New 30/35 HP Motor Open well Sub mersible Mono BLock (Horizontal ) (Crompton/Kirloskar/Texmo) |
| 255 | Supply & Installation Of New 75/80 HP Motor Sub mersible (Vertical) (KSB/Kirloskar/Lubi/ CRI) |
| 256 | Supply & Installation Of New 2 HP Mud Pump Set (Vertical) (KSB/Kirloskar) |
| 257 | Supply & Installation Of New 3 HP Mud Pump Set (Vertical) (KSB/Kirloskar) |
| 258 | Supply & Installation Of New 5 HP Mud Pump Set (Vertical) (KSB/Kirloskar) |
| 259 | Supply & Installation Of New 10 HP Mud Pump Set (Vertical) (KSB/Kirloskar) |
| 260 | Supply & Installation Of New 15 HP Mud Pump Set (Vertical) (KSB/Kirloskar) |
| 261 | Providing and erecting of flow meter repairing complete |
| 262 | Repairing of flow meter transmitter card |
| 263 | Replacements of flow meter electronic sensor |
| 264 | replacement of sensor cable |
| 265 | Repairing of constant voltage transformer |
| 266 | Repairing of flow meter display card |
| 267 | replacement of SMPS of flow meter |
| 268 | Supplying & erecting 300mm size flow meter |
| 269 | Supplying & erecting 200mm size flow meter |
| 270 | Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by Gol and GoM in all respect,including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).(As per MJP DSR 2018-19) |
| 271 | Working Pressure 4 Kg./Sq.cm |
| 272 | 63 mm |
| 273 | 75 mm |
| 274 | 90 mm |
| 275 | 110 mm |
| 276 | 140 mm |
| 277 | 160 mm |
| 278 | Working Pressure6 Kg./Sq.cm |
| 279 | 63 mm |
| 280 | 75 mm |
| 281 | 90 mm |
| 282 | 110 mm |
| 283 | 140 mm |
| 284 | 160 mm |
| 285 | Providing and supplying in standard lengths ISI mark rigid UPVC Pipes |
| 286 | 15 mm |
| 287 | 20 mm |
| 288 | 25 mm |
| 289 | 63 mm |
| 290 | Providing ISI mark GI. pipe of following class and dia. including all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. |
| 291 | MEDIUM |
| 292 | 15 mm |
| 293 | 20 mm |
| 294 | 25 mm |
| 295 | 32 mm |
| 296 | 40 mm |
| 297 | 50 mm |
| 298 | 65 mm |
| 299 | 80 mm |
| 300 | 100 mm |
| 301 | 125 mm |
| 302 | 150 mm |
| 303 | Supply of necessary Items related to hard wares Required for Daily Repair works of Water Supply Pipe line on yearly Basis |
| 304 | UPVC elbows 6kg/cm2 |
| 305 | Size 1/2 inch |
| 306 | Size 3/4 inch |
| 307 | Size 1 inch |
| 308 | size 1.5 inch |
| 309 | size 2 inch |
| 310 | size 3 inch |
| 311 | UPVC MTA 6kg/cm2 |
| 312 | Size 1/2 inch |
| 313 | Size 3/4 inch |
| 314 | Size 1 inch |
| 315 | size 1.5 inch |
| 316 | size 2 inch |
| 317 | UPVC FTA 6kg/cm2 |
| 318 | Size 1/2 inch |
| 319 | Size 3/4 inch |
| 320 | Size 1 inch |
| 321 | size 1.5 inch |
| 322 | size 2 inch |
| 323 | PVC Reducer |
| 324 | size 1/2 x 3/4 inch |
| 325 | size 3/4 x 1 inch |
| 326 | size 1 x 1 1/2 inch |
| 327 | size1 1/2 x 2 inch |
| 328 | size 2 x 2 1/2 inch |
| 329 | size 2 x 3 inch |
| 330 | size 2 1/2 x 3 inch |
| 331 | size 3 x 4 inch |
| 332 | size 4 x 5 inch |
| 333 | size 4 x 6 inch |
| 334 | size 5 x 6 inch |
| 335 | UPVC Reducer |
| 336 | size 1/2 x 3/4 inch |
| 337 | size 3/4 x 1 inch |
| 338 | size 1 x 1 1/2 inch |
| 339 | size1 1/2 x 2 inch |
| 340 | size 2 x 2 1/2 inch |
| 341 | size 2 x 3 inch |
| 342 | size 2 1/2 x 3 inch |
| 343 | PVC end cap plains 6kg/cm2 |
| 344 | Size 1/2 inch |
| 345 | Size 3/4 inch |
| 346 | Size 1 inch |
| 347 | size 1.5 inch |
| 348 | size 2 inch |
| 349 | size 2.5 inch |
| 350 | size 3 inch |
| 351 | size 4 inch |
| 352 | size 6 inch |
| 353 | UPVC end cap plains 6kg/cm2 |
| 354 | Size 1/2 inch |
| 355 | Size 3/4 inch |
| 356 | Size 1 inch |
| 357 | size 1.5 inch |
| 358 | size 2 inch |
| 359 | PVC end cap threaded 6kg/cm2 |
| 360 | Size 1/2 inch |
| 361 | Size 3/4 inch |
| 362 | Size 1 inch |
| 363 | size 1.5 inch |
| 364 | size 2 inch |
| 365 | size 2.5 inch |
| 366 | size 3 inch |
| 367 | UPVC end cap threaded 6kg/cm2 |
| 368 | Size 1/2 inch |
| 369 | Size 3/4 inch |
| 370 | Size 1 inch |
| 371 | size 1.5 inch |
| 372 | size 2 inch |
| 373 | G. I. end cap threaded (inside threaded ) |
| 374 | Size 1/2 inch |
| 375 | Size 3/4 inch |
| 376 | Size 1 inch |
| 377 | G. I. end cap threaded (outside threaded ) |
| 378 | Size 1/2 inch |
| 379 | Size 3/4 inch |
| 380 | Size 1 inch |
| 381 | PVC socket 6kg/cm2 |
| 382 | Size 1/2 inch |
| 383 | Size 3/4 inch |
| 384 | Size 1 inch |
| 385 | size 1.5 inch |
| 386 | size 2 inch |
| 387 | size 2.5 inch |
| 388 | size 3 inch |
| 389 | size 4 inch |
| 390 | size 6 inch |
| 391 | size 8 inch |
| 392 | UPVC socket 6kg/cm2 |
| 393 | Size 1/2 inch |
| 394 | Size 3/4 inch |
| 395 | Size 1 inch |
| 396 | size 1.5 inch |
| 397 | size 2 inch |
| 398 | PVC bend 6kg/cm2 |
| 399 | Size 1/2 inch |
| 400 | Size 3/4 inch |
| 401 | Size 1 inch |
| 402 | size 1.5 inch |
| 403 | size 2 inch |
| 404 | size 2.5 inch |
| 405 | size 3 inch |
| 406 | size 4 inch |
| 407 | size 6 inch |
| 408 | size 8 inch |
| 409 | UPVC bend 6kg/cm2 |
| 410 | Size 1/2 inch |
| 411 | Size 3/4 inch |
| 412 | Size 1 inch |
| 413 | size 1.5 inch |
| 414 | size 2 inch |
| 415 | UPVC ball valve |
| 416 | Size 1/2 inch |
| 417 | Size 3/4 inch |
| 418 | Size 1 inch |
| 419 | size 1.5 inch |
| 420 | size 2 inch |
| 421 | size 2.5 inch |
| 422 | size 3 inch |
| 423 | PVC ball valve |
| 424 | Size 1/2 inch |
| 425 | Size 3/4 inch |
| 426 | Size 1 inch |
| 427 | size 1.5 inch |
| 428 | size 2 inch |
| 429 | size 2.5 inch |
| 430 | size 3 inch |
| 431 | size 4 inch |
| 432 | G. I. bend |
| 433 | Size 1/2 inch |
| 434 | Size 3/4 inch |
| 435 | Size 1 inch |
| 436 | size 1.5 inch |
| 437 | size 2 inch |
| 438 | size 2.5 inch |
| 439 | size 3 inch |
| 440 | size 4 inch |
| 441 | G. I. socket |
| 442 | Size 1/2 inch |
| 443 | Size 3/4 inch |
| 444 | Size 1 inch |
| 445 | size 1.5 inch |
| 446 | size 2 inch |
| 447 | size 2.5 inch |
| 448 | size 3 inch |
| 449 | size 4 inch |
| 450 | size 6 inch |
| 451 | G. I. elbow |
| 452 | Size 1/2 inch |
| 453 | Size 3/4 inch |
| 454 | Size 1 inch |
| 455 | size 1.5 inch |
| 456 | size 2 inch |
| 457 | size 2.5 inch |
| 458 | size 3 inch |
| 459 | size 4 inch |
| 460 | size 6 inch |
| 461 | G. I. Tee |
| 462 | Size 1/2 inch |
| 463 | Size 3/4 inch |
| 464 | Size 1 inch |
| 465 | size 1.5 inch |
| 466 | size 2 inch |
| 467 | size 2.5 inch |
| 468 | size 3 inch |
| 469 | size 4 inch |
| 470 | G. I. barrel nepple |
| 471 | 1/2\\" x 3\\" |
| 472 | 1/2\\"x 4\\" |
| 473 | 1/2\\"x 6\\" |
| 474 | 1/2\\" x 9\\" |
| 475 | 1/2\\"x 12\\" |
| 476 | 3/4\\"x 3\\" |
| 477 | 3/4\\"x 4\\" |
| 478 | 3/4\\"x 6\\" |
| 479 | 3/4\\"x 9\\" |
| 480 | 3/4\\"x 12\\" |
| 481 | 1\\"x 3\\" |
| 482 | 2\\"x 3\\" |
| 483 | 3 \\"x 5\\" |
| 484 | PVC repairing Coupler elastomatric |
| 485 | 63 mm. |
| 486 | 75 mm. |
| 487 | 90 mm. |
| 488 | 110mm |
| 489 | 160 mm. |
| 490 | PVC solution |
| 491 | 20 ml |
| 492 | 50 ml |
| 493 | 100 ml |
| 494 | 200 ml |
| 495 | UPVC solution |
| 496 | 20 ml |
| 497 | 50 ml |
| 498 | 100 ml |
| 499 | 200 ml |
| 500 | 500 ml |
| 501 | M-seal |
| 502 | 10 gm |
| 503 | 50 gm |
| 504 | 100 gm |
| 505 | 200 gm |
| 506 | 500 gm |
| 507 | Taparia spanners open ended |
| 508 | 10-11. |
| 509 | 12-13. |
| 510 | 14-15. |
| 511 | 16-17. |
| 512 | 18-19. |
| 513 | 20-21. |
| 514 | 22-23. |
| 515 | 24-25. |
| 516 | 26-27 |
| 517 | 28-29 |
| 518 | 30-31 |
| 519 | 32-33 |
| 520 | 34-35 |
| 521 | Ring Spanner |
| 522 | 10-11. |
| 523 | 12-13. |
| 524 | 14-15. |
| 525 | 16-17. |
| 526 | 18-19. |
| 527 | 20-21. |
| 528 | 22-23. |
| 529 | 24-25. |
| 530 | 26-27 |
| 531 | 28-29 |
| 532 | 30-31 |
| 533 | 32-33 |
| 534 | 34-35 |
| 535 | Valve Cap |
| 536 | 2\\" Valve Cap |
| 537 | 3\\" Valve Cap |
| 538 | 4\\" Valve Cap |
| 539 | 6\\" Valve Cap |
| 540 | 8\\" Valve Cap |
| 541 | 10\\" Valve Cap |
| 542 | 12\\" Valve Cap |
| 543 | 14\\" Valve Cap |
| 544 | Air Valve Ball |
| 545 | 2\\" Valve Ball |
| 546 | 3\\"Valve Ball |
| 547 | 4\\" Valve Ball |
| 548 | 5\\" Valve Ball |
| 549 | 6\\" Valve Ball |
| 550 | Abrasive Grinder Wheel fo size 6\\" |
| 551 | Abrasive Grinder Wheel fo size 8\\" |
| 552 | Abrasive Grinder Wheel fo size 10\\" |
| 553 | 18\\"(450 mm) Size venus/ Taparia pipe Wrench |
| 554 | 14\\"(350 mm) Size venus/ Taparia pipe Wrench |
| 555 | 12\\"(300 mm) Size venus/ Taparia pipe Wrench |
| 556 | 9\\"(2253 mm) Size venus/ Taparia pipe Wrench |
| 557 | Tikav Arm (Tikav danda) |
| 558 | Tata Tikav |
| 559 | favada Arm ( favada danda) |
| 560 | Tata favada |
| 561 | Nut bolts as per requirement |
| 562 | Nylon Rope |
| 563 | Industrial Rubber sheet |
| 564 | Hack -saw frame |
| 565 | Gland |
| 566 | Hack -saw Blade |
| 567 | Providing and fixing in position M.S. Air valve boxes fabricated with 2mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, appling two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge. |
| 568 | For single ball air valve |
| 569 | For Double ball air valve |
| 570 | Providing and fixing C.I. road box including loading,unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. |
| 571 | 100mm x 225mm(20kg) |
| 572 | 225mm x 300mm(40kg) |
| 573 | Providing , hoisting and fixing in position C.I. manhole, frame and cover of best qualify and of required size and shape with locking arrangements including applying 2 coats of anticorrosive paint, etc. complete, etc. complete. |
| 574 | 90 x 60 cm size and weight 35 kg |
| 575 | Rate on weight basis for any size and type of frame and cover |
| 576 | Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. |
| 577 | Providing and fixing water level indicator upto 5 M height including M.S. enamelled gauge plate 300mm wide 3mm thick, P.V.C. float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. |
| 578 | Providing and fixing water level indicator upto 5 M height including M.S. enamelled gauge plate 150mm wide 3mm thick, P.V.C. float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. |
| 579 | Rachet Drill set ISI mark |
| 580 | 12 mm (1/2\\") |
| 581 | 20 mm (3/4\\") |
| 582 | 25 mm (1\\") |
| 583 | Pipe Die set |
| 584 | 12 mm (1/2\\") |
| 585 | 20 mm (3/4\\") |
| 586 | 25 mm (1\\") |
| 587 | G.I. Union |
| 588 | 12 mm (1/2\\") |
| 589 | 20 mm (3/4\\") |
| 590 | 25 mm (1\\") |
| 591 | Patti Valve M S |
| 592 | 12 mm (1/2\\") |
| 593 | 20 mm (3/4\\") |
| 594 | 25 mm (1\\") |
| 595 | 50 mm (2\\") |
| 596 | Grease Castrol |
| 597 | Cotton Rope |
| 598 | Screw Driver Taparia |
| 599 | Tester Taparia |
| 600 | Insulated Electric Plier 12\\"Taparia |
| 601 | Hammer 1/2 Kg |
| 602 | Hammer 1 Kg |
| 603 | Hammer 1.5 Kg |
| 604 | Hammer 2Kg |
| 605 | Pahar 4 Foot |
| 606 | Pahar 6 Foot |
| 607 | Lock Godrej 7 Levers Small size |
| 608 | Lock Godrej 7 Levers Big size |
| 609 | Providing double flange sluice valve confirming for lS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspectioncharges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 610 | Sluice valves - PN -1 Without Bypass |
| 611 | 50 mm. |
| 612 | 80 mm |
| 613 | 100 mm. |
| 614 | 150 mm. |
| 615 | 200mm |
| 616 | 250 mm. |
| 617 | 300mm |
| 618 | 400mm |
| 619 | Sluice valves - PN -1.6 Without Bypass |
| 620 | 50 mm. |
| 621 | 80 mm |
| 622 | 100 mm. |
| 623 | 150 mm. |
| 624 | 200mm |
| 625 | 250 mm. |
| 626 | 300mm |
| 627 | 400mm |
| 628 | Providing and supplying ISI mark Cl DIF reflux valves (non return valves ) of following dia including raihvay freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied, by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984) |
| 629 | Reflux valves ( Non Return Valve) - PN -1 Without Bypass |
| 630 | 50 mm. |
| 631 | 80 mm |
| 632 | 100 mm. |
| 633 | 150 mm. |
| 634 | 200mm |
| 635 | 250 mm. |
| 636 | 300mm |
| 637 | 400mm |
| 638 | Reflux valves ( Non Return Valve) - PN -1.6 Without Bypass |
| 639 | 50 mm. |
| 640 | 80 mm |
| 641 | 100 mm. |
| 642 | 150 mm. |
| 643 | 200mm |
| 644 | 250 mm. |
| 645 | 300mm |
| 646 | 400mm |
| 647 | Check Nut ( Phosphor bronze / Gun metal) of sluice valve With Machining as per spindle |
| 648 | 50 mm. |
| 649 | 80 mm |
| 650 | 100 mm. |
| 651 | 150 mm. |
| 652 | 200mm |
| 653 | 250 mm. |
| 654 | 300mm |
| 655 | Steel Wire Rope |
| 656 | Plastic Bucket 10 Lit. |
| 657 | Plastic Bucket 20 Lit. |
| 658 | Plastic Bucket 25 Lit. |
| 659 | Ghamela/Round Create 10 \\" |
| 660 | Providing q.nd supplying lSl standard D. l. specials & fitting with sealing rubber gasket of S.B.R,complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.l.pipes including cost of labour, materials, and transpotlaiion to stores, loading and unhading excluding GST levied by GOI & GOM in all respect etc. complete as per IS-9523 |
| 661 | For all types of specials , bends,tees etc. |
| 662 | 80 to 300 mm dia |
| 663 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved nlake epoxy paint (Shalimar, Ciba or Matiindra & Mahindra make) from inside and outside excluding GST levied by GOI & GOM in all respect including irrspection charges, transportationto stores and stacking, etc. complete. |
| 664 | For all types of MS specials , bends,tees flanges etc. |
| 665 | Providing and supplying I.S.l. mark rubber gasket suitable for C.l. or D. l. pipe nf all class for tyton joints including inspection charges, transportation upto departrnentalstores excludinE GST levied by GOI & GOM in all respect etc. complete. |
| 666 | S.B.R. Gaskets for C. l. / Dl Pipes. |
| 667 | 80 mm. |
| 668 | 100 mm. |
| 669 | 150mm |
| 670 | 200 mm. |
| 671 | 250 mm. |
| 672 | 300mm |
| 673 | S.B.R. Tyton joint Rubber ring for Mechanical Joints |
| 674 | 80 mm. |
| 675 | 100 mm. |
| 676 | 150mm |
| 677 | 200 mm. |
| 678 | 250 mm. |
| 679 | 300mm |
| 680 | Providing and supplying in standard lengthsPolvethelene Pioes. confirmino to.lS 4984/14151/12786/13488 latest version with necessary jointing material li kemechanical connector i. e.thread / insert joint / quick release coupler joint/ compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloadingcharges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by Gl & GOM in all respect |
| 681 | PE 100 6 kg/ sq.cm |
| 682 | 25 mm. |
| 683 | 63 mm. |
| 684 | 75 mm. |
| 685 | 110 mm. |
| 686 | Concrete Breaker machine Hitachi Make |
| 687 | 6 Kg. |
| 688 | 10.5 Kg. |
| 689 | 12.5 Kg. |
| 690 | 16 Kg. |
| 691 | Flexible Plastic ring pipe ( Bangadi pipe) |
| 692 | 25 mm |
| 693 | 50 mm |
| 694 | 75 mm |
| 695 | 110 mm. |
| 696 | Plastic Drum 200 lit. |
| 697 | Flexible Rubber pipe 1/2\\" |
| 698 | Flexible Rubber pipe 3/4\\" |
| 699 | Flexible Rubber pipe 3/4\\" |
| 700 | CI / MS water tap 1/2 \\" |
| 701 | CI / MS water tap 3/4 \\" |
| 702 | Drill Tap set 1/2 \\" |
| 703 | Drill Tap set 3/4 \\" |
| 704 | Sintex Three layer water tank 500 lit.to 5000 Lit. Capacity |
| 705 | PVC Tail Piece 6 kg |
| 706 | 63 mm |
| 707 | 90 mm. |
| 708 | 110mm |
| 709 | lSupply of C. l. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. l. Spun Pipes ( as per - lS - 1536 120O1) and D. L Pipes ( as per lS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.l.Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in lS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading,transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc.complete. |
| 710 | 80 mm |
| 711 | 100 mm. |
| 712 | 150 mm. |
| 713 | 200mm |
| 714 | 250 mm. |
| 715 | 300mm |
| 716 | Supply of C.I. mechanical compression collar coupling suitable for C.l. spun pipes (as per lS-1536/2001) and complete with sealing rubber gasket of SBR, C.1., followerglands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laiddown in lS:1538/1993) including all statutary duties and taxes such as GST levied by Gol and GoM in all respect . |
| 717 | 80 mm |
| 718 | 100 mm. |
| 719 | 150 mm. |
| 720 | 200mm |
| 721 | 250 mm. |
| 722 | 300mm |
| 723 | Supply of C.I. mechanical compression collar END CAP suitable for C.l. spun pipes (as per lS-1536/2001) and complete with sealing rubber gasket of SBR, C.1., followerglands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laiddown in lS:1538/1993) including all statutary duties and taxes such as GST levied by Gol and GoM in all respect . |
| 724 | 80 mm |
| 725 | 100 mm. |
| 726 | 150 mm. |
| 727 | 200mm |
| 728 | 250 mm. |
| 729 | 300mm |
| 730 | Di pipe cutter machine heavy Duty 600W AC 220- 240 V (Make - Bosch, Hitachi) |
| 731 | ferrule 15mm |
| 732 | ferrule 20mm |
| 733 | ferrule 25mm |
| 734 | Brass elbows 15mm |
| 735 | Brass elbows 20mm |
| 736 | Brass elbows 25mm |
| 737 | GI Coupling |
| 738 | Size 1/2 inch |
| 739 | Size 3/4 inch |
| 740 | Size 1 inch |
| 741 | size 1.5 inch |
| 742 | size 2 inch |
| 743 | Taplon Tape |
| 744 | Supply of HDEP Pipe |
| 745 | 100mm |
| 746 | 150mm |
| 747 | Supply of HDEP Tail Pice |
| 748 | 100mm |
| 749 | 150mm |
| 750 | Supply of MS Flange |
| 751 | 100mm |
| 752 | 150mm Please Enable Macros to View BoQ information |
