|
| 1 | Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M & L Brick work using sub class “B” bricks straight or curved on plan exc 6 metre mean radius built in CM 1:4 ( Old size brick) including demolition of old brick work complete all as specified and directed. |
| 3 | M & L brick work with subclass 'B' bricks(old size), Straight or curved on plan to any radius in half bricks thick walls built in 1:4 in cement mortar all as Specified and Directed |
| 4 | Demolition of cement concrete ground floor and paving n.exc 15cm thick below or above ground level complete all as specified and directed. |
| 5 | 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc complete all as specified and directed. |
| 6 | Cutting chases, pinning in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls. |
| 7 | Taking up or down steel tubing and connection 15mm bore pipe complete all as specified and directed. |
| 8 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15mm bore complete all as specified and directed. |
| 9 | Taking up or down steel tubing and connection 20mm bore pipe complete all as specified and directed. |
| 10 | S & F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete all as directed. |
| 11 | Dismantling water tank and removing to store exc 250 & n.exc 500 Ltr complete all as specified and directed. |
| 12 | S & F PVC water tank rotational moulded polythylone triple layer white water storage tank (cylindrical vertical with closed lid hoisted and fixed in position)above but 500 ltr capacity complete all as specified and directed by EIC. |
| 13 | Supply and fixed in repair 15mm bore pure metal gate or stope valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union complete all as specified and directed. |
| 14 | S&F in repaires 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and directed. |
| 15 | S&F fixed in repair 20 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 16 | Taking down cement or cement lime plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. |
| 17 | M&L 5 mm thick plastering on ceiling in CM (1:4) even and smooth without using extra cement. |
| 18 | M & L rendering 15mm thick on cement mortar 1:6 finished fair faces of brick work even and smooth without using extra cememt. |
| 19 | M & L rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound finished fair faces of brick/concrete surfaces even and smooth. The work will be carried out in Double storey building the rate of scafolding is included for this item also. WPC will be measured and paid separately. |
| 20 | M&L for complete removal of existing treatment from wall/ plastered surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.Note : The work will be carried out upto double storey building.The rate of scaffolding is included for this item also. |
| 21 | Note : Prepration of scrapped / new surface of wall / ceilling and applying 1 to ½ mm thick wall care putty in two coats as per manufactur instruction complete all as specified and directed. Note:-(work to be carried upto a height of triple storeyed bldg ) |
| 22 | M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of ant tint over a priming coat over 1 to ½ mm thick wall care putty in two coats as per manufactur instruction on wall, chajjas, facia etc complete all as directed. Note : The work will be carried out upto double storey building.The rate of scaffolding is included for this item also. |
| 23 | M&L two coat oil bound distemper over a coat of primer any tint over 1 to ½ mm thick wall care putty in two coats as per manufactur instruction on walls and ceiling complete all as specified in SSR Part I and directed by Engr-in-Charge. (Note : Applying coat after completion of surface as per item No 17 as above and stage has to be passed by Engr-in-charge before laying coat complete all as specified and directed.) OBD to be applied from company approved applicator |
| 24 | Supply and fixed in repair of vitreous china squatting pan 'Orissa pattern' size 580 x 440 mm white with integral foot rest including replacement of 'P' or 'S' CI trap, concrete bedding and making good floor complete all as specified and directed. |
| 25 | S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp complete all as directed. |
| 26 | S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 27 | S&F PVC (SWR) bends with access door in any radius 110mm bore complete all as specified and directed |
| 28 | S&F PVC (SWR) bends with access door in any radius 75mm bore complete all as specifed and directed |
| 29 | S & F PVC (SWR) reducers 75mm bore complete all as specifed and directed |
| 30 | S & F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore complete all as specified and directed |
| 31 | S & F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed. |
| 32 | Dismantling of cast iron or reinforced concrete drain pipes, 100mm bore, jointed in cement mortar and taking out of trenches, if required. |
| 33 | Ditto as per item 32 but 75mm bore |
| 34 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubish off the premises complete all as specified and directed. |
| 35 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone agg) as in flooring 25mm thick complete all as specified. |
| 36 | M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finish in CM (1:6) complete all as specified and directed. |
| 37 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles complete all as specified and directed. |
| 38 | M & L Vitrified ceramic tiles any shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as directed. |
| 39 | M& L Vitrified ceramic tiles any shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,as in vertical surface such as skirting dado and riser to step floor etc set and jointed in tile grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles i complete all as directed. |
| 40 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles complete all as specified and directed. |
| 41 | Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles complete all as directed. |
| 42 | M&L Glazed ceramic coloured tiles of size 450x300 x 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick rendring in CM 1:4 complete all as specified and directed. |
| 43 | M& L anti skid coloured single piece step tile 8 to 10mm thick (rectengular) area of each tiles riserand trades exc 0.15sqm but not exc 0.35 Sqm (Superior quuality) in step etc,set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles and including 15mm thick screed bed / rendering in CM 1:4 as in step finished even and rough complete all as specified and directed. |
| 44 | Supply only liquid water proofing compound |
| 45 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each. |
| 46 | Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutter (without taking off shutters from the frame. Please Enable Macros to View BoQ information |
| 47 | Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutter (without taking off shutters from the frame. Please Enable Macros to View BoQ information |
