|
| 1 | Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each without taking off shutters from the frames. |
| 2 | -do- all as per item No.1 but not exceeding 1.5 sqm Each. |
| 3 | Taking down shutter of any description exc 1sqm but not exc 2 sqm each. |
| 4 | -do—all as per item No.3 but not exc 1 sqm each. |
| 5 | Demolition of cement concrete un-reinforced in any position and paving not exc 15 cm thick above or below ground level |
| 6 | Taking up or down steel tubing and connections, including cleaning for re fixing or removal to store of 15mm dia |
| 7 | Taking up or down steel tubing and connections, including cleaning for re fixing or removal to store of 20mm dia |
| 8 | Taking up or down steel tubing and connections, including cleaning for re fixing or removal to storeof 25mm dia |
| 9 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar |
| 10 | Taking down cement or lime plaster incl racking out joints hacking for key scrubbing down with water etc. |
| 11 | Taking down AC rain water/PVC pipe (any size pattern) including all fittings, including cleaning or refixing or removal to store. OF 110/75mm dia |
| 12 | Demolition of brick work built in cement mortar |
| 13 | Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) and removing serviceable tiles and rubbish off the premises etc all as specified. |
| 14 | S&F PVC door frame of size 50mm X 47mm made out of 5mm plain PVC sheet reinforced with MS tube supplying and fixing only. |
| 15 | M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 16 | Hacking out old broken glass (any thickness/size/quality or description) from wooden frame glazed with putty or fixed with beads. |
| 17 | S&F plain solid straight chowkats and frames wrought, framed second class hardwood rebated on the solid rounded or chamfered put together with glue pinned at joints.andfixed in position complete all as specified and directed by Engr-in-Charge |
| 18 | S&F Mild steel iron as in hold fast confirming to Fe 410-S or Fe 310-S |
| 19 | M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coaltar black paint complete all as specified and directed by Engr-in-Charge |
| 20 | M&L For Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed by Engr-in-Charge |
| 21 | M&L For Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge |
| 22 | M&L For Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and fixed in position |
| 23 | M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F Mild Steel Butt Hinges cold rolled medium weight of 100mm long |
| 25 | do- all as above but 75mm long. |
| 26 | S&F aluminium tower bolt 200mm long of anodised section |
| 27 | -do- all as above but 100mm long |
| 28 | S&F Anodised aluminium alloy handles cast type, each 150mm long |
| 29 | -do- all as above but 125mm long. |
| 30 | S&F aluminium anodized hooks and eye 150mm long. |
| 31 | S&F aluminium alloy anodized sliding door bolt 300mm long with hasp and staple fixing clips etc complete. |
| 32 | S&F sheet glass 3mm thick ordinary quality and glazing in squares not exc 0.50 sqm in each panes incl beading |
| 33 | S&F Sheet glass, ordinary quality 4.8mm thick and glazing with oil putty in square exc 0.5 sq. m in each pane |
| 34 | S&F pin headed 4.0mm thick type and glazing in square n exc 0.5 sqm in each pane |
| 35 | M&L for GI Tubes, Medium grad', galvanised, with all fitting; laid in trenches/floor or fixing with roof of 15 mm dia complete all as specified and directed |
| 36 | M&L for GI Tubes, Medium grad', galvanised, with all fitting; laid in trenches/floor or fixing with roof of 20 mm dia complete all as specified and directed |
| 37 | M&L for GI Tubes, Medium grad', galvanised, with all fitting; laid in trenches/floor or fixing with roof of 25 mm dia complete all as specified and directed |
| 38 | S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket flush pipe and fixed in position complete all as specified and directed |
| 39 | S&F for Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm dia complete |
| 40 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15mm dia |
| 41 | S&F Stop valves/Angle Cock /concealed stop cock and angle cock of cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of 15mm dia |
| 42 | S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement of 75mm dia |
| 43 | S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union of 100m dia complete all as specified |
| 44 | S&F PVC connection with brass socket on both side 45cm to 60cm for 15mm dia pipe. |
| 45 | M&L 10mm thick plaster in CM (1:6) on brick or concrete surfaces of internal walls finished even and smooth without using extra cement |
| 46 | M&L 5mm thick plaster in CM (1:3) on concrete/brick surfaces of ceilings. |
| 47 | M&L 15 mm thick plaster in CM (1:4) finished fair and even on brick/concrete surfaces on ext external surface of wall. |
| 48 | ML cement conc (1:2:4) type B1 (using 20mm graded stone agg) in floors 40mm thick finished even and smooth without using extra cement. |
| 49 | Supply only Plastic dividing strips,1.5mm thick strip and 38mm wide fixed in position complete |
| 50 | M&L for PCC 1:3:6 type C2 using 40mm graded aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed |
| 51 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and directed |
| 52 | M&L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregate asin , cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 53 | M&L deformed bars 10mm dia over cut to length bent to shape reqd, incl cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality confirming to Fe 410-S or Fe 410-0. |
| 54 | S&F in repair viterous china wash hand basin, white flat back, size 550x400mm excluding taps, waste chain and plug but including bracket, and waste pipe complete and fixed in position |
| 55 | S&F waste coupling of 32 /40mmmm dia bore of discharge pipe |
| 56 | Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed. |
| 57 | M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 |
| 58 | S&F plain fillets of 2nd class HW in square, rectangular or triangular in section wrought secured with screw, area exc 6 sq cm but nexc 13 sq cm and fixed with nails/screw in wall etc all as specified and directed |
| 59 | M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer. |
| 60 | M&L preparation of new steel surfaces of any description over 10cm width or girth, not other wise described and applying two coat of synthetic enamel paint over a coat of primer. |
| 61 | M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed |
| 62 | M&L for preparing new concrete/wood surface of ceiling of any description or otherwise and applying three coats of white wash complete all as specified and directed |
| 63 | M&L for backing coat of 10mm thick on wall/skirting to receive the tiles in CM 1:4 |
| 64 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 |
| 65 | M&L for non-skid coloured ceramic tiles 400x400x7 mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and direced |
| 66 | M&L for glazed earthen ceramic coloured tiles of size 300x200x7mm/450x300x7 mm in vertical surface such as skirting/ dado set and jointed in neat cement slurry wioth coloured pigment to match the shade of tiles complete all as specified and directed. |
| 67 | S&F framed grill, gratings etc with ends bars shouldered and or riveted etc and conforming to Fe 290 Gde E-165. |
| 68 | Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping the same with chisel after demarking including remval of debris as ion ceiling and columns |
| 69 | M&L for Providing and applying 25 mm thick plaster in two coats in cement mortar 1:4 for walls/ceiling. and should be added with SBR polymer 2.5 % by weight of cement and addition of 100% PP fibers at the rate specified by the manufacture. Complete all as specified and directed by Engr-In-Charge |
| 70 | S&F Stainless wire Mesh 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with wire staple wire in door/ window and ventilator complete I all as directed. |
| 71 | S&F towel rail 450mm long of PTMT fixed with including chromium plated brass screw and wooden/plastics clits (170gms) |
| 72 | S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated screw cup washer complete |
| 73 | S&F sheet glass shelf asambly consisting of 5.50mm thick glass sheet shelf 12 cm wide with chromium plated bracket guard and railing 60cm long |
| 74 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 75 | M&L for PCC 1:4:8 type D2 using 40mm graded aggregate 75mm thick as in sub base complete |
| 76 | M&L for Cement concrete tiles 22cm x 22cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished |
| 77 | Fixing only Cement concrete tiles 22cm x 22cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished |
| 78 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 79 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cmthick, spread, levelled and rammed including watering as sand cushioning layer 40mm thick below inter locking pavor block to required grtedient and camber all as directed by Engr-in-Charge |
| 80 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specifeid and as directed |
| 81 | Demolition of cement concrete un-reinforced in any position and paving not exc 15 cm thick above or below ground level |
| 82 | Taking down cement or lime plaster incl racking out joints hacking for key scrubbing down with water etc. |
| 83 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar |
| 84 | Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) and removing serviceable tiles and rubbish off the premises etc all as specified. |
| 85 | Hacking out old broken glass (any thickness/size/quality or description) from wooden frame glazed with putty or fixed with beads. |
| 86 | S&F sheet glass 3mm thick ordinary quality and glazing in squares not exc 0.50 sqm in each panes incl beading |
| 87 | S&F Sheet glass, ordinary quality 4.8mm thick and glazing with oil putty in square exc 0.5 sq. m in each pane |
| 88 | S&F pin headed 4.0mm thick type and glazing in square n exc 0.5 sqm in each pane |
| 89 | S&F PVC connection with brass socket on both side 45cm to 60cm for 15mm dia pipe. |
| 90 | M&L 10mm thick plaster in CM (1:6) on brick or concrete surfaces of internal walls finished even and smooth without using extra cement |
| 91 | Supply only Plastic dividing strips,1.5mm thick strip and 38mm wide fixed in position complete |
| 92 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and directed |
| 93 | M&L deformed bars 10mm dia over cut to length bent to shape reqd, incl cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality confirming to Fe 410-S or Fe 410-0. |
| 94 | S&F in repair viterous china wash hand basin, white flat back, size 550x400mm excluding taps, waste chain and plug but including bracket, and waste pipe complete and fixed in position |
| 95 | S&F waste coupling of 32 /40mmmm dia bore of discharge pipe |
| 96 | Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed. |
| 97 | S&F plain fillets of 2nd class HW in square, rectangular or triangular in section wrought secured with screw, area exc 6 sq cm but nexc 13 sq cm and fixed with nails/screw in wall etc all as specified and directed |
| 98 | M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer. |
| 99 | M&L preparation of new steel surfaces of any description over 10cm width or girth, not other wise described and applying two coat of synthetic enamel paint over a coat of primer. |
| 100 | M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed |
| 101 | M&L preparing Old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed |
| 102 | M&L for preparing new concrete/wood surface of ceiling of any description or otherwise and applying three coats of white wash complete all as specified and directed |
| 103 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 |
| 104 | M&L for non-skid coloured ceramic tiles 400x400x7 mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and direced |
| 105 | M&L for glazed earthen ceramic coloured tiles of size 300x200x7mm/450x300x7 mm in vertical surface such as skirting/ dado set and jointed in neat cement slurry wioth coloured pigment to match the shade of tiles complete all as specified and directed. |
| 106 | S&F framed grill, gratings etc with ends bars shouldered and or riveted etc and conforming to Fe 290 Gde E-165. |
| 107 | Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping the same with chisel after demarking including remval of debris as ion ceiling and columns |
| 108 | S&F Stainless wire Mesh 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with wire staple wire in door/ window and ventilator complete I all as directed. |
| 109 | S&F towel rail 450mm long of PTMT fixed with including chromium plated brass screw and wooden/plastics clits (170gms) |
| 110 | S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated screw cup washer complete |
| 111 | S&F sheet glass shelf asambly consisting of 5.50mm thick glass sheet shelf 12 cm wide with chromium plated bracket guard and railing 60cm long |
| 112 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 113 | M&L for Cement concrete tiles 22cm x 22cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished |
| 114 | Fixing only Cement concrete tiles 22cm x 22cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished |
| 115 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 116 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cmthick, spread, levelled and rammed including watering as sand cushioning layer 40mm thick below inter locking pavor block to required grtedient and camber all as directed by Engr-in-Charge |
| 117 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specifeid and as directed |
| 118 | S & F wall mounted LED 20 watts, batton type fitting for surface and pendant application, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements with PVC block and connection from ceiling rose to fitting complete including dismantling the existing unserviceable fitting, complete all as specified and as directed. Make: Philips/ Havels/ Jaguar. |
| 119 | Supply and fix LED energy saving surface mounted decorative oval bulk head light comprising of high brightness 10W, 6000K LEDs complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. Make: Philips/ Havels/ Jaguar. |
| 120 | Supply and fix in repairs LED mirror light fiiting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. Make: Philips/ Havels/ Jaguar. |
| 121 | Supply and fix in repairs LED Security light fiiting 25 W LED (Smart Bright Essential) complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket complete all as specified and as directed. Make: Philips/ Havels/ Jaguar. |
| 122 | Supply and fix in repairs LED inverter T-LED bulb 20 W, 2 pin, B 22 type Cool daylight, 8hrs charging time, 4hrs back-up time complete all specified and as directed. Make : Philips, Havells and Jaguar or equivalent. |
| 123 | S & F in repairs Main motor suitable for Stainless Steel Desert cooler any size/make complete all as specified and directed by Engr-in-Charge. |
| 124 | S & F in repairs Fan blade suitable for Stainless Steel Desert cooler any size/make complete all as specified and directed by Engr-in-Charge. |
| 125 | S & F in repairs Start and run capacitor suitable for Stainless Steel Desert cooler any size/make complete all as specified and directed by Engr-in-Charge. |
| 126 | S & F in repairs Submersible pump 15 W 720 Ltr/Hr Model HG380, Make Symphony suitable for Stainless Steel Desert cooler any size/make complete all as specified and directed by Engr-in-Charge. |
| 127 | S & F in repairs Cooling pad suitable for Stainless Steel Desert cooler any size/make complete all as specified and directed by Engr-in-Charge. |
| 128 | S & F in repairs motor mounting stand suitable for Stainless Steel Desert cooler any size/make complete all as specified and directed by Engr-in-Charge. |
| 129 | 23. Supply and Fix in repairs battern holder (angle / straight), two pin type suitable for self ballast LED lamps screwed with round block including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. |
| 130 | Supply and fix ceiling fan 1200 mm sweep 220V, 5 star rated, BLDC fan without remote including suitable fixing arrangement all as specified and directed. ( NOTE: Old Ceiling fan to be deposited after taking down to MES store.) |
| 131 | Supply and fix Exhaust fan Steel Body Heavy duty 300 mm sweep, 1200rpm, 230 Volts, 50 Hz with louvers, cutting well and with fixing arrangements all as specified and directed. |
| 132 | M&L for SPN enclosure with two pin and earth plug and socket with 240 volts 20 Amp SP MCB, complete all as specified . |
| 133 | Supply and fix Exhaust fan Steel Body Heavy duty 250 mm sweep, 1200rpm, 230 Volts, 50 Hz with louvers, cutting well and with fixing arrangements all as specified and directed. |
| 134 | Taking down ceiling fan 1200mm/1400mm sweep from any height and bringing down to floor, dismantling the ceiling fan and overhauling by means of replacing defective ball bearing, bushes, split pins, grease, packing, winding and cleaning externally, re-assembliing the ceiling fan and checking, refixing in its position complete all as specified and directed. |
| 135 | All as per item No.14 but for exhaust fan 250/300 mm including replacing of rusted nut and bolts complete all as specified and directed. |
| 136 | Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed. |
| 137 | S&F plain fillets of 2nd class HW in square, rectangular or triangular in section wrought secured with screw, area exc 6 sq cm but nexc 13 sq cm and fixed with nails/screw in wall etc all as specified and directed |
| 138 | M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer. |
| 139 | M&L preparation of new steel surfaces of any description over 10cm width or girth, not other wise described and applying two coat of synthetic enamel paint over a coat of primer. |
| 140 | M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed |
| 141 | M&L preparing Old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed |
| 142 | M&L for preparing new concrete/wood surface of ceiling of any description or otherwise and applying three coats of white wash complete all as specified and directed |
| 143 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 |
| 144 | M&L for non-skid coloured ceramic tiles 400x400x7 mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and direced |
| 145 | M&L for glazed earthen ceramic coloured tiles of size 300x200x7mm/450x300x7 mm in vertical surface such as skirting/ dado set and jointed in neat cement slurry wioth coloured pigment to match the shade of tiles complete all as specified and directed. |
| 146 | S&F framed grill, gratings etc with ends bars shouldered and or riveted etc and conforming to Fe 290 Gde E-165. |
| 147 | Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping the same with chisel after demarking including remval of debris as ion ceiling and columns |
| 148 | S&F Stainless wire Mesh 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with wire staple wire in door/ window and ventilator complete I all as directed. |
| 149 | S&F towel rail 450mm long of PTMT fixed with including chromium plated brass screw and wooden/plastics clits (170gms) |
| 150 | S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated screw cup washer complete |
| 151 | S&F sheet glass shelf asambly consisting of 5.50mm thick glass sheet shelf 12 cm wide with chromium plated bracket guard and railing 60cm long |
| 152 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 153 | M&L for PCC 1:4:8 type D2 using 40mm graded aggregate 75mm thick as in sub base complete |
| 154 | M&L for Cement concrete tiles 22cm x 22cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished |
| 155 | Fixing only Cement concrete tiles 22cm x 22cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished |
| 156 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 157 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cmthick, spread, levelled and rammed including watering as sand cushioning layer 40mm thick below inter locking pavor block to required grtedient and camber all as directed by Engr-in-Charge |
| 158 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specifeid and as directed Please Enable Macros to View BoQ information |
