|
| 1 | M&L for removing sand and saw dust mixed in ratio of 50:50 and screen fired/dummy bullets, any other debris, ploughing and refilling the same along firing range by spreading leveling to make the required level etc. in Small Arm Range complete all as specified and as directed by Engineer-in-Charge. Note- (i) Measurement for filling in firing range shall be carried by stack measurement removed from existing firing range before filling by the contractor (ii) Measurement shall be carried out for net finished volume of earth filled subjected to 20% deduction due to bulkage. |
| 2 | M&L for sand filling by mixing of saw dust in ratio of 50:50 by spreading leveling to make the required level etc. in Small Arm Range complete all as specified and as directed by Engineer-in-Charge. Note- (i) Sand and saw dust required for filling shall be brought out from out side MD Land under his own arrangement of contractor (ii) Sand shall be free from pebbles, stones, bushes, shrubs and other vegetation, black cotton soil (iii) Measurement for filling in small arm range shall be carried by stack measurement of the soil brought by the contractor (iv) Measurement shall be carried out for net finished volume of earth filled subjected to 20% deduction due to bulkage. |
| 3 | Removing old worn out (unserviceable) HDPE bags/gunny bags from stacks filled with sand etc and supply & placing in position new HDPE bags/gunny bags inner laminated layer standard quality, wt. of bag shall not be less than 90 Grams per bag and filled with locally available sand / soil (Approx. Qty -1.20 Cuft in each bags) including tying properly & stacking neatly, placing the bag at different heights for making pyramid for pin etc complete all as specified and as directed. |
| 4 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed by Engr-in-Charge. |
| 5 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed by Engr-in-Charge. |
| 6 | M&L for pre-painted galvalume aluminum Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges etc fixed with self drilling screws all as specified and as directed by Engr-in-Charge. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 8 | S&F roof trusses (framed), trussed, purlin, crane gantries, rail and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (FE-410-W (Gde E-250) Quality-B) including distance pieces, cleats etc including steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop before fabrication, all as specified and as directed by Engr-in-Charge. |
| 9 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, all as specified and as directed by Engr-in-Charge. |
| 10 | Demolition of brickwork or stone/ boulder masonry / PCC block masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete, all as specified and as directed by Engr-in-Charge. |
| 11 | M&L for pre-cast cement concrete block masonry type C-1,1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, all as specified and as directed by Engr-in-Charge. |
| 12 | Demolition of concrete (un-reinforced) in ground floors and paving n exe 15cm thickness (below or above ground level) including removal of debris to out of MoD land, all as specified and as directed by Engr-in-Charge. |
| 13 | M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and paving etc, all as specified and as directed by Engr-in-Charge. |
| 14 | M&L for sand cushioning 25mm thick over concrete surfaces, spread all as specified and as directed by Engr-in-Charge. |
| 15 | M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqm (M-35), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment laid all as specified and as directed by Engr-in-Charge. |
| 16 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in cement mortar, all as specified and directed. |
| 17 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed or bedding or backing layer of cement mortar 1:6, 15 mm thick complete, all as specified and as directed by Engr-in-Charge. |
| 18 | M&L for PCC (1:3:6) Type C2 (using 40 mm graded stone aggregates ) as in foundation of drain etc complete all as specified and directed by engineer in charge. |
| 19 | M & L for PCC (1:2:4) Type B1 (using 20 mm graded stone aggregate ) in coping, including necessary form work finished fair and even surface without using extra cement including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engg-in-Charge. |
| 20 | M&L Extra for forming fair finished drain or channel 40 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. as specified and directed by engineer in charge. |
| 21 | M&L for rendering 15 mm thick on concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement for surfaces of Area Drain complete all as specified and directed by engineer in charge . |
| 22 | Taking down cement plaster or cement lime mortar on brick or stone walls etc incl raking out joints, hacking for key, scrubbing down with water etc includig removal of debris outside of defence land all as specified and directed. |
| 23 | M&L rendering 10mm thick in CM 1:4 on fair faces of brick or concrete, internal surfaces of walls finished the surface fair and even without using extra cement complete all as specified and directed by Engg-in-Charge. |
| 24 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash incl cornices all as specified and as directed by Engr-in-Charge. |
| 25 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface of wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified as directed by Engineer-in-Charge. |
| 26 | M&L for preparation of new plastered or old plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm in camouflage pattern over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm(upto 10.00 mtr height of Bldg), complete all as specified as directed by Engineer-in-Charge. |
| 27 | Dismantling Stone slabs and interlocking tiles (Laid Dry) of any description or thickness in floors, aprons etc Please Enable Macros to View BoQ information |
