|
| 1 | Taking down chowkats or frames with shutters (w/o taking off shutters) n exc 1.5 sqm each complete all as specified. |
| 2 | Taking down chowkats or frames with shutters (w/o taking off shutters) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified. |
| 3 | Taking down shutter and refixing the shutter in same opening after making necessary repair to shutter of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified. |
| 4 | Resecuring or easing & adjusting without taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified. |
| 5 | Taking down shutters of any description exc 1.0 Sqm but not exceeding 2.0 Sqm complete all as specified. |
| 6 | Hacking out old broken glass (any thickness size quality in description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified. |
| 7 | S&F factory made steel windows box type using ERW hollow P section including box type hinges with steel handle, tower bolt, peg stay and hold fast complete with glazing bars dovetailed or welded complete without cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified. |
| 8 | S&F factory made steel windows box type using ERW hollow P section including box type hinges with steel handle, tower bolt, peg stay and hold fast complete without glazing bars dovetailed or welded complete without cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified. |
| 9 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified. |
| 10 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified. |
| 11 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified. |
| 12 | S&F sheet glass 4 mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified. |
| 13 | S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified. |
| 14 | S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works complete all as specified. |
| 15 | S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc complete all as specified. |
| 16 | M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm complete all as specified. |
| 17 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified. (Make : Rajshree, ENGCO Industries) |
| 18 | M&L Factory made solid panel of PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. (Make: Rajshree, ENGCO Industries or equivalent) |
| 19 | M&L for 100mm long, medium weight, Mild Steel butt hinges fixed with doors complete all as specified. |
| 20 | S&F Aluminum tower bolts of extruded section of size 150mm complete all as specified. |
| 21 | S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised handles complete all as specified. |
| 22 | M&L for pressed steel frames 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike, plate etc complete all as specified. |
| 23 | M&L for pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike, plate etc complete all as specified. |
| 24 | M&L for PCC (1:2:4) type B-0, using 12.50mm aggregate in filling pressed steel frame, concrete shall be compressed complete all as specified. |
| 25 | S&F 30mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle boad medium density, wood particle board with commercial face venners; supplied and fitted to chowkats complete all as specified. |
| 26 | S&F 35mm thick factory made second class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, guaze, etc (without sash bars), edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified. |
| 27 | M&L 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type one face is covered with deco rative face veneer with lipping/frame to match complete all as specified. |
| 28 | S&F 100mm long mild steel but hinges medium weight, cold rolled complete all as specified. |
| 29 | S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia width including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified. |
| 30 | S&F 150mm long Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified. |
| 31 | S&F 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified. |
| 32 | S&F Aluminium floor door stopper (overall length of cover plate 140mm) with suitable stops (double) fixed in wooden door to stop complete all as specified. |
| 33 | M&L two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces of girth exc 10cm complete all as specified. |
| 34 | M&L for welding in repairs exc 2.5 cm but n. exc 5 cm in length on steel surfaces of thickness exc 20 mm but n. exc 25 mm complete all as specified. |
| 35 | M&L for 25mm Box Type butt hinges for steel window/ventilators fixing with welding minimum thickness of 20mm including dismantling of old projecting type butt hinges complete all as specified |
| 36 | S&F in repairs 300 mm long mild steel sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified. |
| 37 | S&F in repair 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed to door complete all as specified. |
| 38 | S&F in repair 150mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed to door complete all as specified. |
| 39 | S&F in repair 150mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified. |
| 40 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed to door complete all as specified. |
| 41 | S&F in repair 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed to door complete all as specified. |
| 42 | S&F in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified. |
| 43 | S&F in repair door closer (Aluminium extruded section body) hydraulically regulated designation No 3 universal type, (ISI marked) suitable for door shutters of 851 to 1000mm in width & 61 to 80 Kg weight complete all as specified. |
| 44 | S&F in repair 300mm long helical spring mild steel including welding to existing frame complete all as specified. |
| 45 | S&F in repair 25 mm internal dia Stainless Steel Curtain Rod including decorative type knobs at both ends of approved make including curtain bracket fancy type (two Nos of brackets/knobs/corners for one length/each opening) complete all as specified. |
| 46 | S&F in repair stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified. |
| 47 | Dismantling loose concrete cover of RCC coloums, beams, slabs, Chajjas (Soffit only), and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 30 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 3% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including 15mm thick plaster in cement mortar 1:4, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed (Guniting work is to be carried out upto 06 mtr height from ground level). Notes :- (i) Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer. |
| 48 | M&L 100mm thick PCC type B-2, 1:2:4 (40mm graded aggregate) in two layeres complete all as specified. |
| 49 | M&L for forming construction joint 8 mm wide and 80mm deep for quality concrete slab cleaning the complete joint and top primed with primer and filled 10mm with pooyurethane thermo setting type sealant over 10mm deep polythene back up material and pasting polythene adhesive tape all along on the both the edges of joint and removing the same after filling and tooling the material inside the joint to remove spilled over material including one coat of lime wash on the vertical surfaces complete all as specified. |
| 50 | M&L for finishing surface of concrete pavements by brooming complete all as specified. |
| 51 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 52 | M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified. |
| 53 | M&L for two coats of oil bound distemper on newly plastered walls over one coat of clearcolle on plastered surface to prepare the surface even and smooth including preparation of surfaces complete all as specified. |
| 54 | M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper over a old plastered surface complete all as specified. |
| 55 | M&L for 10 mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified. |
| 56 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified. |
| 57 | M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified. |
| 58 | M&L for rendering 15mm thick ready mix plaster in ratio 1:4 factory made blended mixture of OPC and graded sand (silica sand) and high quality additives designed for consistant quality and and high adhesion on fair face of stone/concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified. |
| 59 | Supply only integral water proofing compound ISI marked complete all as specified. |
| 60 | Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified. |
| 61 | M&L for two coats of cement base paint on old plastered/pointed surfaces of walls including necessary preparation of surfaces complete all as specified. |
| 62 | Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified. |
| 63 | M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified. |
| 64 | Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. |
| 65 | M&L for square rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified. |
| 66 | All as per item No. 65 but except stone. |
| 67 | Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20 mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type complete all as specified. |
| 68 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified. |
| 69 | M&L for 20-25mm thick machine cut kota stone flooring over and including 20mm thick screed bed CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified. |
| 70 | M&L machine cut Kota stone 16-18 mm thick in riser of steps, skirting dado and pillar laid over 10 mm thick screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) complete all as specified. |
| 71 | Anodised aluminium door of approved design complete all as specified/directed with all fixing arrangement including providing and fixing door handle, tower bolts, mortice lock 6 lever (Make - Harrison/Godrej) one on each door and floor door spring for alu door (one No for each shutter), aluminium anodized tower bolts 200 mm long (03 Nos on each shutters) and 5 mm thick tinted glass of selecteed quality not exc 0.50 Sqm in each pane along with aluminium glazing beading of size 19.00 mm x 17.5 mm x 0.70 mm @ weight of 0.097 Kgs per RM including rubber gasket on both side complete alongwith neoprene lining. The member shall be made out of extended aluminium section comprising of :-(a) Door frame of size 95.25 mm x 44.50 mm x 1.70 mm @ 1.301 Kg/RM(b) Shutter vertical member 85 x 44.50 x 1.56 mm @ 1.39 Kg per RM (c) Shutter top member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM.(d) Shutter bottom member 101.60 x 44.50 x 1.60 mm @ 1.301 Kg per RM.(e) Shutter lock rail member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM.The actual measurement shall be taken, wastage shall be including in the rates, the above sections are from JINDAL/INDAL/HINDAICO/WALCO extruion. The contractor is at liberty to choose high section from approved make with minor variation in sizes and weight as approved. However nothing extra shall be paid for over size and over weight section also. |
| 72 | S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :--(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447)(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446)(c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455)(d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454)(e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844)Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx B. Please Enable Macros to View BoQ information |
