|
| 1 | Taking down cement plaster of any description, including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | M & L for rendering on walls, 15mm thick in cement mortar (1:4) on fair faces of brick work, with WPC @ 3% by wt of cement, surface finished even and smooth without using extra cement complete all as specified and as directed.Note: - WPC shall be measured and paid separately. |
| 3 | M & L for rendering on walls 15 mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 4 | M & L for Rendering 5mm thick in cement mortar 1:3 in ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 5 | Supply only integral water proofing compound. |
| 6 | M & L preparation of newly plastered or Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 7 | M & L for Preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer using chalk whitening over and including a coat of 2 to 3mm thick wall care putty complete all as specified and directed. |
| 8 | M & L for applying two coats of white wash including preparation of new plastered surfaces of ceiling complete all as specified and as directed. |
| 9 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 10 | M & L for Brick work with flyash bricks old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 11 | S & F in repair MS hook for dia 15 mm to 50 mm GI/PVC pipe for fixing on wall or floor complete all as specified and directed. |
| 12 | Demolition of cement concrete unreinforced in ground floor and paving not exceeding 15 cm thick (below or above G.L) complete all as specified and directed. |
| 13 | M & L for plain cement concrete Type B-O, 1:2:4 (using 12.5 mm graded stone aggregate) in roof kerbs, mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 14 | M & L for Cement concrete 1:3:6 using 40 mm graded stone aggregate for plinth protection complete all as specified and directed. |
| 15 | Dismantling floor hearth or wall tiling including cement motor bedding (But not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed. |
| 16 | M & L for glazed ceramic coloured tiles on vertical surface 350X450X6-7 mm thick, over and including 10mm thick rendering in CM 1:4. Set and jointed in neat cement slurry and pointed in where or coloured cement to match, complete all as specified and as directed. |
| 17 | M & L for coloured non-skid ceramic tiles 7-8 mm thick (square/rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floors etc. (including spacers in tiles where required and directed) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer complete all as specified and as directed. |
| 18 | M & L for coloured non-skid ceramic tiles 7-8 mm thick (square/rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer complete all as specified and as directed. |
| 19 | M & L for light shade Vitrified ceramic tiles 10 mm thick (Squarer/ rectangular) Polished, area of each tiles n. exc. 0.36sqm, in floors etc. set and jointed in neat cement slurry over and including bedding layer of screed bed 15 mm thick in CM 1:6 and pointed in white/colour cement to match complete all as specified and as directed. |
| 20 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed. |
| 21 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 22 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 23 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 24 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 25 | Taking up or down 15 mm bore GI tubing pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 26 | All as per Item No 25.00 above but for 20 mm dia GI tube complete all as specified and as directed. |
| 27 | S & F 15 mm bore galvanized steel tubing medium grade with all fittings and fixed to walls, ceiling, floors etc complete all as specified and as directed. |
| 28 | All as per Item No 27.00 above but for 20 mm dia GI tube complete all as specified and as directed. |
| 29 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed. |
| 30 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer’s instructions on Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling complete all as specified and directed. |
| 31 | S & F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 32 | M & L for Cutting existing 15 mm steel tubing for alterations or additions (each cut measured) complete all as specified and as directed. |
| 33 | All as per Item No 32.00 above but for 20 mm dia steel tubing complete all as specified and as directed. |
| 34 | All as per Item No 32.00 above but for 25 mm dia steel tubing complete all as specified and as directed. |
| 35 | Taking up or down 15mm steel tubing and connections, including cleaning and Re-fixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 36 | All as per Item No 35.00 above but for 20 mm dia steel tubing complete all as specified and as directed. |
| 37 | All as per Item No 35.00 above but for 25 mm dia steel tubing complete all as specified and as directed. |
| 38 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity exc 500 Ltr and n.exc 1000 ltr tank complete all as specified and directed. |
| 39 | S & F in repair 15 mm bib tab fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for pipe or for brass ferrule and fixed complete all as specified and as direcrted. |
| 40 | S & F in repair 15 mm bore Bib taps standard of PTMT any colour high pressure screwed for iron pipes and fixed complete all as specified and as directed. |
| 41 | S & F in repair 15 mm stop valve fancy type chromium plated with high pressure, with crutch butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 42 | S & F in repair 15 mm stop valve cast copper alloy with fancy type chromium plated with long shank and cup (concealed), high pressure, with crutch butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 43 | S & F in repair 15 mm Pillar taps, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without letterer 'Hot' or 'Cold’ with long screwed shank and flynut, screwed for iron pipe and fixed complete all as specified and as directed. |
| 44 | S & F in repair for 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 45 | S & F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed. |
| 46 | S & F in repair Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws & wooden/ plastic cleats (Minimum weight 190 gms) complete all as specified and as directed. |
| 47 | S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed. |
| 48 | S & F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screwed and cup washers complete all as specified and as directed. |
| 49 | S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 50 | S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 51 | S & F PVC cabinet size 450x600mm with looking mirror complete all as specified and as directed. Make: - Prayag or equivalent. |
| 52 | S & F repair vitreous china white wash hand basin flat back size of 550x400mm including brackets including cutting, pinning in ends of brackets or erecting stand complete all as specified and as directed. |
| 53 | S & F in repair vitreous china wash down water closet (Pedestal) P or S trap including PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device, connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe joint to socket or stopper etc, complete all as specified and as directed. |
| 54 | S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including making good to floor complete all as specified and as directed. |
| 55 | S & F in repair Vitreous China urinals, (half stall urinal) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 56 | S & F in repair Urinal spreader 300 mm length of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms) complete all as specified and as directed. |
| 57 | S & F in repair 10 ltrs capacity PVC valve-less, symphonic action type, flushing cistern, low level, white, with inlet ,ball valve, float and handle including flush pipe (long bend) for low level cistern complete all as specified and as directed. |
| 58 | S & F in repair PVC SWR pipe 110mm single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 59 | S & F in repair PVC SWR 110mm bends complete all as specified and as directed. |
| 60 | S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 61 | S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 62 | S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 100mm dia pipe complete all as specified and as directed. |
| 63 | S & F in repair PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 64 | S & F in repair PVC connection 15mm size with PTMT nuts of length 900 mm complete all as specified and directed. |
| 65 | S & F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 66 | S & F in repair Waste coupling of PTMT 32-40mm dia (half or full threaded) (minimum weight - 45 gms) complete all as specified and directed. |
| 67 | S & F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms. / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. |
| 68 | S & F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 69 | Taking down chokhat with shutter (without taking down shutters from the frame) n. exc 1.5 sqm complete all as specified and directed. |
| 70 | Taking down chowkhat with shutter (without taking down shutters from the frame) exc 1.5 sqm but n. exc 4 Sqm complete all as specified and directed. |
| 71 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed. |
| 72 | Taking down Shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified and directed. |
| 73 | S & F 2nd class Hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 74 | S & F Pressed steel frames for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directred. |
| 75 | S & F MS flat iron, bent to shape as required for small articles, such as hold fast, clamps and any necessary items complete all as specified and directed. |
| 76 | S & F Decorative flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, face is covered with decorative face veneer with lipping /frame to match on both sides complete all as specified and directed. |
| 77 | S & F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and as directed. |
| 78 | S & F in repair Galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm in metal/ wooden almunium frames complete all as specified and as directed. |
| 79 | S & F in repair Steel windows with side hung shutters including projecting type hinges, with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and as directed. |
| 80 | S & F in repair Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. |
| 81 | S & F in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed. |
| 82 | S & F in repair 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 83 | S & F in repair 300mm long sliding door bolts with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified and as directed. |
| 84 | S & F in repair butt hinges 100 mm medium weight, cold rolled mild steel complete all as specified and as directed. |
| 85 | S & F in repair 150mm long aluminium anodised extruded handles fabricated type, complete all as specified and directed. |
| 86 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete all as specified and as directed. |
| 87 | S & F 3mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane complete all as specified and directed.Note: - Fillets to be measured and paid separately. |
| 88 | S & F 3mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane in repair complete all as specified and directed. |
| 89 | S & F 5 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 90 | S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 91 | S & F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S. square tube, all as per specification and drawing complete all as specified and as directed. |
| 92 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 93 | M & L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and incl a coat of pink primer complete all as specified and directed. |
| 94 | M & L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and including a coat of red oxide primer complete all as specified and directed. |
| 95 | S & F in repairs Aluminium extruded section body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg. complete all as specified and directed. |
| 96 | S & F in repair for cover of PVC water tank (any capacity) in standard shape fixed with two Nos MS nut bolts, washer as required complete all as specified and directed. |
| 97 | S & F in repair towel rail CP 20 mm dia 600 mm long complete all as specified and directed.Make: - Jaquar or equivalent |
| 98 | S & F in repair PVC waste pipe for drain of water from wash basin, sink, urinals and Other places complete all as specified and directed. |
| 99 | S & F in repair angle cock 15mm CP cast copper screwed down for iron pipe complete all as specified and directed. |
| 100 | M & L re-securing or easing and adjusting wooden door shutter/ window shutter of any type Taking / without taking down shutters and re-fixing in the same complete all as specified and directed. |
| 101 | M & L re-securing or easing and adjusting aluminium door shutter/window shutter of any type taking / without taking down shutters and re-fixing in the same complete all as specified and as directed. |
| 102 | M & L easing / adjusting of steel doors/ windows and oiling/ greasing for smooth functioning complete all as specified and directed. |
| 103 | Supply and fixing anodised aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 65mm x 38mm x 1.55 mm and section of bottom and lock rail shutter frame of 45mm x 45mm x 1.55 mm with and including panels of 5 mm thick plain/frosted float glass, and all necessary fittings complete all as specified and as directed. |
| 104 | S & F for Powder coated aluminium sliding windows for two track with 4 mm thick plain/ coloured glass fixed with powder coated aluminium standard beads/glazing clips having weight not less than 300gm per RM, locking arrangement etc and aluminium frame of size 64mmX45mmX1.55mm and shutter of section 20mm X 40mm X 1.55mm including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed. |
| 105 | S & F in repair 25mm dia Harrison rails (Curtain Rods), mild steel, chromium plated with fixing (CP coloured) brackets, stops, rollers etc. complete all as specified and as directed. |
| 106 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed. |
| 107 | M & L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening conforming to Fe-290 Gde-E-165 and fixing complete all as specified and as directed. |
| 108 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 109 | S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self-tapping screws complete all as specified and directed. |
| 110 | S & F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self-tapping screws complete all as specified and as directed. |
| 111 | Taking down wall panelling and similar work complete all as specified and directed. |
| 112 | S & F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed. Please Enable Macros to View BoQ information |
