|
| 1 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (Below or above ground level) including removal of debris 1km from the Dockyard permises complete all as specified and directed. |
| 2 | M&L for providing slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the M-25, (20mm graded aggregate) design mix complete all as specified and directed. |
| 3 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 4 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (Below or above ground level) including removal of debris up to 5km from the Dockyard permises all as specified and directed. |
| 5 | M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 10cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 6 | M&L for cement concrete in foundations, plinth beams, filling and mass concrete type D-2 1:4:8 (40mm graded aggregate) all as specified and directed. |
| 7 | M&L for forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound Grade ‘B’ complete all as specified and directed. |
| 8 | M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'B' for 150mm thick of concrete slab all specified and directed. |
| 9 | Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 10 | M&L for rendering 15 mm thick plaster in CM (1:4) using SBR latex emulsion @ 4% by weight of cement on brick or concrete surfaces of walls the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 11 | Supply only integral water proofing compound all as specified and directed. |
| 12 | M&L for preparation of newly plastered surfaces of walls and applying two or more coats of 100% premium acrylic paint having VOC less than 50 gm/litre and UV resistance a per IS 15489:2004, Alkali & fungal resistance, dirt resistance ecterior paint of required shade 9company depot tinted with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior promer applied @ 0.9 litre/10 sqm over new surfaces complete all as specified and directed. |
| 13 | Complete removal of existing treatment on walls and for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces with one coat of birla putty complete all as specified and directed. |
| 14 | Demoliton brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc and removing the debries to a distance 5km away from the Dockyard premises all as specified and directed. |
| 15 | M&L for pre cast cement concrete type 1:3:6 type C-1 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 16 | Dismantling Galvalume aluminium zink coating ( corrugated or semi corrugated ) sheets, in roof covering complete all as specified and directed. |
| 17 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at any height complete all as specified and directed. |
| 18 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at any height complete all as specified and directed. |
| 19 | M&L for preparation of old painted steel surface over 10 cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed Please Enable Macros to View BoQ information |
