|
| 1 | Dismantling of floor, hearth or wall tiles including cement mortar bedding but not backing and removal of debris/rubbish off the premises complete all as specified. |
| 2 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 3 | All as per item No 02 above but as in skirting incl 10mm thick rendering in CM 1:4 complete all as specified. |
| 4 | M&L for glazed ceramic coloured designer tiles 450 x 300x 7 mm thick as in Vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc. including 10mm thick rendering in CM 1:4 complete all as specified. |
| 5 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 6 | All as per item No 5 but as in skirting incl 10mm thick rendering in CM 1:4 complete all as specified. |
| 7 | Taking down cement plaster in any description from concrete/stone/brick surfaces scrubing down with water etc and its removal from site etc complete all as specified. |
| 8 | M&L for rendering 15mm thick on fair faces of stone masonry surfaces of internal wall in CM 1:6, finished even and smooth without using extra cement complete all as specified. |
| 9 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of alkali resistant primer as priming coat complete all as specified. |
| 10 | M&L for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying two coats of distemper oil emulsion, white or tintedcomplete all as specified. |
| 11 | M&L for Preparation of old decorated surfaces of ceiling (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of distemper oil emulsion (white or tint as directed) on ceiling with brush leaving permises clean etc complete all as specified. |
| 12 | Material and labour for preparation of old ceiling surface including pillars etc (plastered or unplastered) by scrapping down smoke spot moulds, moss and efflorescenet salt and treatin oil and greasy spots and applying two coat of white wash with moonj brush only complete all as specified. |
| 13 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of white wash on wall with brush leaving permises clean etc complete all as specified. |
| 14 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of distemper oil emulsion (white or tint as directed) on walls with brush leaving permises clean etc complete all as specified.Note : (i) Quantity of material shall be calculated based on constants given in Joglekar book and requisite quantity will be deposited by contractor immediately after approval of sample for safe custody in terms of Note on CA.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 15 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of cement base paint on external wall surface with brush upto the 8 Mtr height complete all as specified. |
| 16 | S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc complete all as specified. |
| 17 | M&L one coat of synthetic enamel paint including prepration of old treated wooden surfaces of girth exc 10cm complete all as specified. |
| 18 | M&L one coat of synthetic enamel paint including prepration of old treated steel surfaces of girth exc 10cm complete all as specified. |
| 19 | Removing of existing filling in sunken floor of WC and repair to sunken floor with 15mm thick plastering in CM 1:3 of internal surface mixed with WPC, than painting with bitumen 30/40 over a coat of bitumen primer, putting 50 micron polythene than filling with PCC 1:5:10 type E-2 using 40mm graded stone aggregate and inserting 50mm bore 1.00M long GI water tubing to the wall complete all as specified. Note : WC and tiles shall be measured and paid separately. |
| 20 | Demolition of reinforced cement Concrete in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, roof projection in D/S bldgs and similar suspended work complete all as specified. |
| 21 | M&L cement concrete type B-1, nominal mix (20mm graded aggregate) for chajja, roof projection in D/S bldgs, fins facia, stair case, landing, balcony & the like etc complete all as specified. |
| 22 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent shape required, including welding to existing reinforcement cranking bending, hooking etc and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified. |
| 23 | All item as per Ser No 22.00 above but 6 to 8mm dia. |
| 24 | M&L formwork to fins, louvers, fascia, chajjas, roof projection in D/S bldgs, stair case fair finished surfaces complete all as specified. Please Enable Macros to View BoQ information |
| 25 | M&L formwork to fins, louvers, fascia, chajjas, roof projection in D/S bldgs, stair case fair finished surfaces complete all as specified. Please Enable Macros to View BoQ information |
