|
| 1 | Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints, hacking for key & scrubbing down with water etc complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. |
| 2 | Taking down chowkhats with shutters (without taking off shutter from frame) n exc 1.5 Sqm each with mongry including Cutting holes into through brick wall and making good to dismantled portion in CM (1:3) or PCC (1:2:4) complete all as specified and as directed. |
| 3 | Taking down chowkhats with shutters (without taking off shutter from frame)exc 1.5 Sqm but n exc 4 sqm each with mongry including Cutting holes into through brick wall and making good to dismantled portion in CM (1:3) or PCC (1:2:4) complete all as specified and as directed. |
| 4 | Taking down steel window/ventilator with shutters (without taking off shutter from frame) not exc 1.5 Sqm each with mongry including Cutting holes into through brick wall and making good to dismantled portion in CM (1:3) or PCC (1:2:4) B1complete all as specified and as directed. |
| 5 | Taking down steel or window/ventilator with shutters (without taking off shutter from frame) exc 1.5 Sqm but not exc 4 sqm each with mongry including Cutting holes into through brick wall and making good to dismantled portion in CM (1:3) or PCC (1:2:4) B1 complete all as specified and as directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. |
| 7 | Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete, all as specified and as directed by Engr-in-charge.Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. |
| 8 | Dismantling Stone slabs and tiles of any description or thickness in floors,wall,counter aprons etc, complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge.Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. |
| 9 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. |
| 10 | Glazed ceramic coloured tiles 600 x 300 x 7 mm thick on vertical surface such as skirting , dados and risers to steps over and including 10 mm thick cement plaster on prepared wall surface using cement mortar 1:4 (1 cement : 4 coarse sand) mixed with Dr. fixit LW+/ Dr fixit pidiproof LW+ as intergral waterproofing compound, applied. set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 complete all as specified and directed by Engineer-in-Charge. |
| 11 | Vitrified ceramic tiles coloured Dark shade (scratch and stain resistant tiles) 8 to 9 mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in skirting etc set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 12 | Vitrified ceramic tiles coloured Dark shade (scratch and stain resistant tiles) 8 to 9 mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm in flooring etc set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 laid over and including 15 mm thick screed bedding layer in CM (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 13 | Providing & fixing false ceiling at all heights with Semi perforated 12mm thick thick micro tegular edged GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0 0.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600 mm x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85 mm x 25 mm x 2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge. |
| 14 | Machine cut Kota stone slab flooring 16-18 mm thick, SIZE 55 CM x 55 CM laid over & including 15 mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge. |
| 15 | Machine cut Kota stone slab 16 - 18 mm thick as in skirting,steps, dado and pillars etc, laid over & including 10 mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge. |
| 16 | Green Marble work 16 to 18 mm thick (table rubbed and Pre polished) as in counter basin,steps (Treads/Riser/Skirting), jambs, pillars, window cills, cooking platforms and like over 15mm thick screed bed/back coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including Bull nose Rounding to edges of stone slabs, such as in steps, cooking platform, and other similar works complete all as specified |
| 17 | White Makrana Marble work 16 to 18 mm thick (table rubbed and Pre polished) as in steps/floor (Treads/Riser/Skirting), jambs, pillars, window cills, cooking platforms and like over 15mm thick screed bed/back coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including Bull nose Rounding to edges of stone slabs, such as in steps, cooking platform, and other similar works complete all as specified |
| 18 | Granite any shade/colour, 18 to 20 mm thick, (table rubbed and polished) in single piece (in one direction) machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick (average thickness) cement mortar (1:4) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Granite jet black shade, 18 to 20 mm thick, (table rubbed and polished) not exc 150 mm width of strip on wall,top and Dado/skirting/top rail at wall top machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4) screed, & similar situations, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete |
| 21 | Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 22 | (a) Complete removal of existing treatment by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.(b) Material and labour for 1 mm thick Putty application complete application over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty(c) Appliying one coat of waterproofing primer/ damp-proof primer @ 1 Itr per 50 sqft. diluted with 30 % by water to be applied using roller.(d) Allow 4-6 hrs to dry the surface for painting of subsequent coats.(e) Material and labour for two coats of interior premium acrylic emulsion of approved colour using roller and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to hard-to-reach areas and penetration of acrylic emulsion on the surface at any height (upto 4th floor) complete all as specified and directed. |
| 23 | Preparation of new plastered/ concrete/ unplastered surfaces of wall and applying two coats of interior acrylic emulsion using roller and including 1 mm wall care puty including preparation of surface complete all as specified and directed. |
| 24 | Complete removal of existing treatment including washing, rubbing down and stopping ofpainted surfaces and applying metallic textured paint of required shade 1-2 mm thick : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of primer applied @ 2.20kg/10 sqm by skilled labour complete all as directed. including corinces pillars etc filling the all holes/ patches with wall care putty to make surface smooth wherever required complete all as specified and directed. |
| 25 | Material and Labour for preparation of old decorated brick/ concrete/ plastered or unplastered surfaces of ceiling by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed. including corinces pillars etc filling the all holes/ patches with wall care putty to make surface smooth wherever required and applying two coats of interior acrylic emulsion by using roller complete (upto 4th floor) all as specified and directed. |
| 26 | Steel rolling shutters 1.25 mm thickness laths, with out ball bearing, as specified including top cover,anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: push pull or manual type including taking out old Steel rolling shutters complet all as specified and directed. |
| 27 | Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge. |
| 28 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per drawings and the directions of Engineer-in-Charge |
| 29 | Supply and fixing in repairs drapery rods/ curtain rods stainless steel pipe (fancy type) 20-25 mm in dia with end SS brackets & knobs, funnels fixed with rawl plug and screws, including taking down old curtain rod/ wooden pelmet complete all as specified and directed. |
| 30 | 150 mm long Aluminium alloy handles, fabricated type,powder coated american complete all as specified and directed by Engineer-in-Charge. |
| 31 | Aluminium powder coated american barrel tower bolts of extruded section with length of bolt 200 mm and dia of bolt not less than 10 mm,ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 32 | 200 mm long Aluminium extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed by Engineer-in-Charge. |
| 33 | Aluminium anodised,barrel tower bolts of extruded section with length of bolt 150 mm and dia of bolt not less than 10 mm,ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 34 | 100 mm Butt hinges, medium weight, cold rolled stainless steel, and fixed with screws or with welding to existing MS frames complete all as specified and directed by Engineer-in-Charge. |
| 35 | Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engineer-in-Charge. |
| 36 | Ball bearing for rolling shutters and fixed complete all as specified & directed by Engineer in Charge. |
| 37 | Supply and fixing in repair door closer (Aluminium die cast body) hydraulically regulated,designation No. 2,universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply and fixing in repair Double action floor spring hydraulically regulated madeup of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steelheavy duty and fixed and fixed complete all as specified and directed by Engineer-in-Charge. |
| 39 | Sheet glass 4mm thick ordinary quality and glazing with silicon sealant & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq. mtr in each pane complete all as specified and directed by Engineer-in-Charge. |
| 40 | Sheet glass 5mm thick tinted type, ordinary quality and glazing with silicon sealant & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares exceeding 0.5 Sq. mtr in each pane complete all as specified and directed by Engineer-in-Charge. |
| 41 | Stainless steel work in framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Grade 304 complete all as specified and directed. |
| 42 | Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors,tank staging etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 (Gde E-165) complete all as as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fixing in repairs 18 to 20 mm thick block board core and plywood face panels, commercial type with 0.80 mm mica on both sides any colours and fixed with screws in cup board shutters/ shelves and kitchen cabinets including 0.80 mm thick PVC edge binding tape around beading each shutter incl taking down cup board shutter, cabinat with frame and shelves complete all as specified and directed. |
| 44 | Stainless steel cutlery pan SS 304 grade basket of any description/pattern as approved by GE ,fixed with sliding channel,revolving wheels fixed with screws to timber frame work in kitchen cabinets,cupboards etc fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply and fixing in repair telescopic channel/slider to fiacilitate drawer slide on steel ball bearing 400-500 mm long and fixed in position with stainless steel screws , ISI marked , suitable for cupboard drawers , complete as per the sample kept in the office of Engr-in-charge. |
| 46 | Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge. |
| 47 | INTERNAL ELECTRIC SUPPLY WORKS |
| 48 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including ,fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed. |
| 49 | Taking down carefully copper/ aluminium sub main wiring complete, including existing batten/ conduit etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and directed. |
| 50 | Taking down MCB DB/ TPN along with MCBs of any size and removal from site and making good disturbed surfaces complete all as specified and directed. |
| 51 | Dismantling of ceiling fans,scrapping of old paint,Painting of ceiling fans complete, in situ with two coats of synthetic enamel paint over a coat of anti- corrosive zinc red oxide by spraying including filling cavities with filler, one coat after cleaning all dust etc,replacement of rubber bush,nuts,bolts,washers,split pin,down rod,coppre flexible cable all as specified and directed. Please Enable Macros to View BoQ information |
| 52 | Dismantling of ceiling fans,scrapping of old paint,Painting of ceiling fans complete, in situ with two coats of synthetic enamel paint over a coat of anti- corrosive zinc red oxide by spraying including filling cavities with filler, one coat after cleaning all dust etc,replacement of rubber bush,nuts,bolts,washers,split pin,down rod,coppre flexible cable all as specified and directed. Please Enable Macros to View BoQ information |
