|
| 1 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area n exc 1.5 sqm each complete all as specified and directed |
| 2 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not n.exc 4.0 sqm each complete all as specified and directed |
| 3 | Supply and fixing aluminium powder coated any colour (minimum thickness of powder coating 50 micron) frame (sliding and shutter type) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 4 | Supply and fixing for anodised powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed |
| 5 | Supply and fixing for anodised powder coated aluminium sliding door shutters made of aluminium sections , including necessary joining cleats, glazing clips, rubber/neoprene packing, aluminium rollers, sliding track, handles (2 Nos. in each shutter), anodised aluminium snap beading, screws, etc. complete, suitable for sliding operation, all as specified and directed by the Engineer-in-Charge. |
| 6 | Supply and fixing for powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 7 | Supply and fixing 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc.omplete all as specified and directed |
| 8 | Supply and fix sheet glass 5.5 mm thick of selected quality (tinted glass) n exc. 0.5 sqm each fixed to aluminium frame work with necessary rubber beading complete all as specified and directed by Engineer in Charge,. |
| 9 | Supply and fix sheet glass 5.5 mm thick of selected quality (tinted glass) exc. 0.5 sqm each fixed to aluminium frame work with necessary rubber beading complete all as specified and directed by Engineer in Charge,. |
| 10 | Supply and fix powder coated aluminium anodised aluminium window and ventilator shutters, side hung/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,nodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle(1) complete all as specified and directed. |
| 11 | Supply and fixing for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer |
| 12 | Supply and fixing for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | Supply and fixing for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed |
| 14 | Supply and fixing for 100mm long butt hinges medium weight, mild steel, and fixed complete all as specified and directed |
| 15 | Supply and fixing aluminium body mortice lock vertical type size 100mm 4 lever, including escutcheon plate and two No keys fixed complete all as specified and directed by Engr-in-Charge.Make : Godrej/Harison |
| 16 | Supply and fixing for 125mm long aluminium anodised, barrel tower bolts of ex-truded section and fixed complete all as specified and directed |
| 17 | Supply and fixing for 125mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed |
| 18 | Supply and fixing Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 19 | Supply and fixing in repair modular partition workstation single seating in 45mm thick with prelaminated top of 25mm thick as per color approved. Workstation having glass/fabric/white board pratition above the top of the table, with three drower mobile pedestal, keyboard and CPU trolley. Overall size for per seat 1200x600x1200mm. (single seat) Make Royal Koas, Model No ESC/WS/009 or equivalent |
| 20 | Supply and fixing in repair modular partition workstation Double Seating in 45mm thick with Prelaminated top of 25mm thick as per color approved. Workstation having glass/fabric / white board partition on the top of the table.With Mobile pedestal, keyboard and CPU trolley . Overall Size for per seat : 1200x600x1200mm. Make Royal Koas or equivalent |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off thepremises complete all as specified and directed |
| 22 | M&L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed |
| 23 | All as per item no 22 but on vertical surface such as skirting including Rendering/backing 10mm thick in CM 1:4 on brick wall surfaces, other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed |
| 24 | Removal and refixing of existing modular partition workstations of approved make, comprising table top, vertical partitions and associated accessories, for single or double seating arrangements, complete. |
| 25 | Dismantling of ceiling /wall panelling including frame work and board complete all as specified and directed |
| 26 | Supply and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm ,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1m length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions by GE. |
| 27 | M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching with wall panelling complete all as specified and as directed |
| 29 | Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed |
| 30 | M&L for rendering 10mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement up to four storey height bldg complete all as specified and directed |
| 31 | M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces finished fair and even smooth without using extra cement complete all as specified and directed |
| 32 | M&L for Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and directed |
| 33 | M&L for Providing and applying (1 to 2) mm thick wall care putty on wall plastered surface/concrete surface and prepare the surface even and smooth complete all as specified and directed |
| 34 | M&L for preparation of new surfaces of walls, and applying two coats of distemper oil emulsion over a coat of alkali resistant primer on wall surface complete all as specified and directed |
| 35 | M&L for preparation of new plastered or unplastered surface and applying three coats of white wash on wall complete and all as specified and directed. |
| 36 | M&L for preparation of new plastered surface and applying two coats of white wash on ceiling surfaces complete all as specified and directed |
| 37 | Removal and refixing of existing mechanical compactor storage units comprising single face or double face units, fixed and/or mobile types, complete all as specified and directed. |
| 38 | Taking down carefully copper/aluminium point wiring light, fan, light fittings, socket or power complete, such as switches, ceiling roses, pendants, regulators, sockets etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
| 39 | Taking down carefully copper/aluminium point wiring light, fan, light fittings, socket or power complete, such as switches, ceiling roses, pendants, regulators, sockets etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
