|
| 1 | JOB NO. 3BRD/CAP (OTM)/05/2026-27 |
| 2 | Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc. or for shafts, wells cesspits, manholes, pier hole etc. and getting out, complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Material and labour for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete all as specified and directed. |
| 5 | Material and labour for RCC Design Mix M-25 using 20mm graded crushed stone aggregates, foundation, including rafts, footing, foundation beams, plinth beams, base for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specfied and directed. |
| 6 | Material and labour for RCC Design Mix M -25 using 20mm graded crushed stone aggregates, Columns, pillars, piers,posts and struts concrete complete all as specfied and directed. |
| 7 | Material and labour for RCC Design Mix M-25 using 20mm graded crushed stone aggregates, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like concrete complete all as specfied and directed. |
| 8 | M & L for Formwork (rough finished surfaces of concrete) to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter complete all as specified and directed. |
| 9 | M & L for Formwork of rough finished surface to sides of pillars, posts, struts, piers, columns and stanchions of Square, rectangular, polygonal complete all as specified and directed. |
| 10 | M & L for Formwork (rough finished surfaces of concrete) Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 11 | M&L for Formwork (rough finished surfaces of concrete) to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontalor sloping and similar work exc 10cm but n exc 20cm wide. |
| 12 | S & F for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending spirrally for hooping for columns hooking ends and binding with a incluidng mild steel wire (annealled) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 13 | S & F for mild steel TMT bars 5mm dia and over upto and including 10mm diain stirrups, spacers and binders cut to length, bent to shape required including cranking, bending spirrally for hooping for columns hooking ends and binding with a incluidng mild steel wire (annealled) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for 15mm thick rendering in cement mortar 1:6 on walls of other than fair face finished even and smooth without using extra cement at any height compete all as specified and directed. |
| 15 | M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of oil bound distemper over one coat of primer, over 2mm thick white putty white or tinted upto 15 Metre height including necessary scaffolding etc complete all as specified and directed.Note:- Application of distemper shall be with the help of a roller only. |
| 16 | M&L for 10mm thick rendering in cement mortar 1:3 mixed with WPC as in ceiling/ chajjas finished even and smooth upto 12 Metre height including necessary scaffolding etc complete all as specified and as directed. Note :- WPC shall be measured and paid separately. |
| 17 | M&L for preparation of new plastered /concrete surfaces of ceiling and applying two coat of oil bound distemper, white or tinted with 1 mm thick white putty upto 12 Metre height including necessary scaffolding etc complete all as specified and directed.Note:- Application of distemper shall be with the help of a roller only. |
| 18 | M&L for heavy duty, exterior grade tile (Durastone of Somany/Endura of Jhonson /orient bell as approved by GE) of any size 10mm thick, as in floor (in trades, landing etc), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified and directed. |
| 19 | M&L for hard core of broken stone or boulders of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 20 | M&L 75 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed |
| 21 | M&L for 25 mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) complete all as specified and directed. |
| 22 | M & L for anti skid/matte finish coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm over & including 15mm thick Screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Make : Orient ceramic /H&R Johnson/ Kajaria etc. |
| 23 | M & L for super gloss finished/carving (PGVT) tiles external/Internal in vertical surfaces 600mm x 1200mmx 7 to 8mm thick over & including 10mm thick rendering in Cement Mortar 1:4 set and jointed in neat cement slurry or tile adhesive and pointed in white or coloured cement to match complete all as specified and as directed. Make : Orient ceramic/ H&R Johnson/ Kajaria etc. |
| 24 | Demolition of brick work built in cement mortar in any position and in any location complete all as specified and directed by the Engineer-in-Charge. |
| 25 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 26 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 27 | M&L for 15mm thick rendering in cement mortar 1:4 on walls with WPC of surfaces finished fair & even without using extra cement upto 12 Metre height complete all as specified and directed.Note :- WPC shall be measured and paid separately |
| 28 | M&L for preparation of new plastered/concrete surface of wall/chajjas/facia and applying two coats of exterior emulsion paint over one coat of primer, over 2mm thick water proof putty upto 4.00 Metre height including necessary scaffolding etc complete all as specified and directed. |
| 29 | M&L for fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns BIS product Confirming to IS 2095 Part 3:2022, having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part 4)-1970 and light reflectance of 90% (minimum) to be laid and including in true horizontal level suspended on inter-locking metal Powder Coated T-Grid of hot dipped galvanized iron section of 0.33mm thick on Silhouette Profile, rotary stitched single webbed white with 6mm reveal profile (Black), comprising of main-T runners of size 15x32 mm of length 3000 mm, cross-T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners/ (Screw holding in same size for trusses, rafter and purlins etc), 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 20x20x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws.The work shall be carried out as per specifications, drawing and nothing shall be paid for offset,moulding,cover etc. Make : Diamond brand TM/ Dexune/ Everest/ Arm strong ceiling. Note : MTC to be provided by manufacturer. |
| 30 | M&L for cleaning the surface before final treatment on roof as specified, applying the double layer of glass fibre mesh of 60 GSM over the roof using poly plastic fibre adhesive mix/ Eazee coat ultra in the following manner :-(a) Making poly plastic fibre/ Eazee coat ultra adhesive mix by adding polyplastic fibre white cement in equal portion and add 25% water in it to make the mixture as per manufacturer instructions. (b) Apply poly plastic fibre adhesive mix/ Eazee coat ultra on roof with help of roller/brush as a base coat.(c ) The double layer of fibre mesh to be spread on the roof & apply two coat of above mixture of poly plastic fibre adhesive/ Eazee coat ultra with a roller & brush to cover the fibre mesh throughouly. (d) Process of roof lamination :- Lamination/top coat on the roof using poly plastic fibre coat with white cement & water as per manufacturer instructions. Top coat is ammonia free, w/o any harmful effects, & is flexible in nature. (e) Min thickness of the treatment shall be 2mm. Make : Nerolac Perma/ European Paints & Chemicals/ Ever Paint. |
| 31 | S&F for Rotational moulded polyethylene white water storage tanks 1000 litres capacity three layered white in colour (clylindrical vertical with threaded closed top) hoisted and fixed in position with all GI fittings including 20 mm dia Ball brass valve, high pressure with polythene float and flynut all as specified in SSR Part I. |
| 32 | S & F 15mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and incl. necessary cutting chasing into wall etc all as specified and as directed. |
| 33 | S & F for 20mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and cutting chasing into wall etc all as specified and as directed. |
| 34 | S&F for brass chromium plated 40mm bottle traps with wall flange for wash basins/urinal pot with inlet and outlet screwed for pipe or connections including necessary packing, union, cap and reducer and fixed. Make: Cera/ Hindware/ Parryware. |
| 35 | M&L GI pipe 50mm dia medium grade laid on floor/inserted in wall incl all fittings complete all as specified and direced by EIC. |
| 36 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 37 | S&F 75 mm PVC (SWR) pipes of pressure rating not less than 6kg/cm2, single socket in any length with rubber ring joints, laid in trenches, wall, floors, walls etc complete all as specified and directed. |
| 38 | S&F for 75 mm PVC bends,branch piece or similar fitting as reqd to make the system functional complete all as specified and directed. |
| 39 | S & F 110mm bore PVC (SWR) pipes of pressure rating not less than 6kg/cm2, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed on wall complete all as specified and as directed. |
| 40 | S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified. |
| 41 | S&F for Vitreous China table top wash basin, white or ivory colour flat back, size 530mmx420mmx140mm/600x390x150mm/600x380x130mm excluding taps, waste chain and plug and porcelain stopper but including Coupling as per Model complete all as specified and directed. Make : Jaquar (cat part No. JDS-WHM-25907N), Parryware (Cat part No. WPC898Z46), Cera (cat part No. S2020172) |
| 42 | S & F automatic sensor operated urinal flushing system complete with infrared sensor incl solenoid valve, control box, battery/AC operated mechanism, chrome plated cover plate, necessary fittings and connections, including cutting and making good the wall complete all as specified and directed. Make : Jaquar (URS-WHT-13267S), CERA (Calcia EFS), Hindware (Hindware Senso Art) |
| 43 | S&F 12mm thick toughnend frosted glass use as modular glass urinal partitions in chamfer shaps or as per required shape of each patitions including all fixing arrangement ie.stainless steel clamp/stud for hanging glass complete all as specified and directed. |
| 44 | M&L Granite18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like including 12mm thick Screed bed or bedding layer in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed. |
| 45 | M&L for edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 46 | S & F of Vitreous china one piece EWC standard size white/ivory colour, wall hanging / floor mounted with dual flushing cistern white including 'P' or 'S' trap, fixed as complete all as specified and directed. Make : Jaquar (Cat part No. CNS-WHT-853S300SPPSM), Cera (CAT part No. S1013228), Parryware (Cat part No. WPC890N46) |
| 47 | S&F for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and directed. Make : Cera (Cat No. F8040204), Parryware (Cat No:WPT9926A1), Hindware (Cart part:F570043CP). |
| 48 | S&F for Chromium plated bib cock with wall flange, Screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore. Make : Hindware (cat No. F690004CP), Parry ware (cat No-WPT5004A1), Cera (cat No.F2014151). |
| 49 | S & F for chromium plated pillar cock, with extension body, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore. Make : Jaquar (cat part No.VGP-CHR-81021N), Cera (cat part No. F1023102), Parryware (cat part No WPT2301A1). |
| 50 | S & F for 5.50mm thick mirror of selected quality glass with edge moulding, mounted on wall fixed with SS stud fixed complete all as specified and directed. |
| 51 | S&F for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specified and directed. |
| 53 | S&F for Pop up coupling of CP (half or full threaded) 32 mm to 45 mm bore fixed complete all as specified and directed.Make : Hindware/ Jaquar/ Parryware. |
| 54 | S&F for Chromium plated brass flexible health faucet with clamp all as necessary fitting etc complete all as specified. Make : Jaquar/ Parry ware/ Hindware. |
| 55 | S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 56 | S&F for CP Toilet paper holder including all fitting and fixture complete.Make : Jaquar/ Parry ware/ Hindware. |
| 57 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions)of any dark/wooden colour with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 58 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows(two or three track sliding/openable) & ventilators of any dark/wooden colour including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 59 | Material and labour for repair aluminium composite panel sheet of 4mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber basket complete all as specified and directed. Make :- Alstone/ Alex panel/ Armstrong/ Euroboard. |
| 60 | Supply and fix 5mm thick float glass, tinted/smocked shape fixed to frame/ shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed |
| 61 | Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 62 | Supply and fix, butt hinges, 100mm long, extruded aluminium alloy with with powder coating with stainless steel hinge pin, complete all as specified and directed. |
| 63 | Supply and fix 180mm size powder coated (any tint) aluminium \\"American Handle\\" fixed to aluminium door with suitable screws, complete all as specified and directed. |
| 64 | Supply and Fix, Aluminium powder coated, barrel tower bolts 200mm long, of extruded section and fixed, complete all as specified and directed. |
| 65 | Supply and fix, Aluminium alloy, anodised, Sliding door bolts 200mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed. |
| 66 | Supply and fix 140mm size Floor door stopper of aluminium powder coated body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 67 | M&L for 75 mm long premium cabinet handles made of Stainless Steel Grade 304 (SS 304), heavy-duty quality, of standard thickness, of approved make and design (sleek / designer / tubular / profile type), with satin / brushed / matte / PVD finish, including :(a) Supplying handles complete with high-quality SS screws, washers, and concealed fittings.(b) Anti-rust and corrosion-resistant material suitable for kitchen and wardrobe use.(c) Fixing on shutters/drawers of cabinets, wardrobes, modular kitchens, etc.(d) Accurate drilling, alignment, firm fixing, and finishing without surface damage(e) All labour, tools & tackles, scaffolding (if required), and complete installation. |
| 68 | S&F factory made of 18 mm thick HDHMR board with 1 mm thick decorative laminate (sunmica) on outer face and balancing laminate on inner face, including 2 mm PVC edge banding, complete all as specified & directed . Make : Century ply/ Green panel/ ActionTesa/ RAJSHRI/ ECOCELL.Note :- Coloured approved by GE. |
| 69 | S&F for Stainless steel soft close hinges of side 75mm long for cabine/wordrobe leaf complete all as specified and as directed. |
| 70 | S & F for stainless steel wardrobe lock of approved make (such as Godrej / Ebco / Hettich / Dorset or equivalent), made of SS 304 grade, suitable for wooden/WPC wardrobe shutters, complete with:Lock body with cylinder mechanism 2 or 3 keys (nickel plated) SS strike plate Necessary screws, fittings & accessories Fixing on shutter including cutting/slotting if required The lock shall be corrosion-resistant, smooth in operation, and of approved design and finish.Complete as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 71 | S & F for stainless steel wardrobe lock of approved make (such as Godrej / Ebco / Hettich / Dorset or equivalent), made of SS 304 grade, suitable for wooden/WPC wardrobe shutters, complete with:Lock body with cylinder mechanism 2 or 3 keys (nickel plated) SS strike plate Necessary screws, fittings & accessories Fixing on shutter including cutting/slotting if required The lock shall be corrosion-resistant, smooth in operation, and of approved design and finish.Complete as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
