|
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in hard standing complete all as directed by Engr-in-Charge. |
| 3 | M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete. |
| 4 | M&L for 100 mm thick, PCC (1:4:8) type B-2 using 40 mm graded stone aggregates as in sub base complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for 40 mm thick, PCC (1:2:4) type B-1 using 20 mm graded stone aggregates as in floor complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for sand cushioning under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for 60 mm thick machine pressed precast concrete interlocking paver block any shape and size M-35 grade with grey cement and no pigment confirming to IS 15658-2006 complete all as specified and directed by Engr-in-Charge. |
| 8 | Demolition brick work built in cement mortar of any description complete all as specified and directed by Engr-in-Charge. |
| 9 | M & L brick work with sub class 'B' brick straight or curved on plan exc 6M mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 10 | Taking down cement plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water etc and complete all specified and as directed and directed by Engr-in-Charge. |
| 11 | Material and labour for 10mm thick cemet plalster in CM 1:6 over brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 12 | Material and labour for 15mm thick cemet plalster in CM 1:4 over brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 13 | Material and labour for 5mm thick cemet plalster in CM 1:3 over brick/concrete surfaces finished even and smooth complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for preparing of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by the Engineer-in-charge |
| 15 | M&L for preparing new plastered or un-plastered surfaces of walls and Finishing walls with Acrylic Smooth exterior paint of required camouflaging shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete and all as specified. |
| 16 | M&L for preparing old plastered or un-plastered surfaces of walls and Finishing walls with Acrylic Smooth exterior paint of required camouflaging shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete and all as specified. |
| 17 | M&L for preparing of newly plastered surfaces on ceiling and applying three coats of white wash complete all as specified and directed by the Engineer-in-charge |
| 18 | M&L for preparing of old decorated surfaces and applying one coat of oil bound distemper on walls by roller brush including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, etc complete all as specified. |
| 19 | Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge. |
| 20 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.. |
| 21 | S & F in replacement framed work as in doors or gates and sign boards of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge. |
| 22 | S & F MS plate 6 to 8mm thick plain, cut to shape forming holes and welded to truss and verticle post all as required, complete confirming to Fe 410-W(Gde- 250)quality-B complete all as specified and directed by Engr-in-Charge. |
| 23 | Preparing new steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 24 | Preparing old steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 25 | Painting lines, dashes, arrows, letters, etc on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow complete all as spd and directed by Engr-in-charge. |
| 26 | S&F of reflective boards size 1.2x1.2 mtr writing as per user requirement complete all as spd and directed by Engr-in-charge. |
| 27 | Dismantling AC corrugated or semi corrugated or plain sheets in wall cladding complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 29 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 30 | M&L for forming embankments including raising or lowering earth, spreading in layers n exc 30 cm thick, watering, ramming/rolling and finishing to required size shape etc exc 3.00 m and n exc 4.5 m high complete all as specified. |
| 31 | M&L for forming embankments including raising or lowering earth, spreading in layers n exc 30 cm thick, watering, ramming/rolling and finishing to required size shape etc exc 4.5m and n exc 6.0m high complete all as specified. |
| 32 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips.complete all as directed. |
| 33 | S&F in repairs 5.50mm thick glass fixed with rubber packing aluminium snap beading and metal pins in skelton shutters of doors and windows complete all as specified. |
| 34 | S&F 3 mm thick glass sheet, ordinary quality and glazing with oil putty in square exc 0.5 sq.m ineach pane Complete all as directed. |
| 35 | Taking down chowkhats or frame n exc 1.50 sqm each complete all as specified and as directed. |
| 36 | Taking down chowkhats or frame exc 1.50 sqm but n exc 4 sqm each complete all as specified and as directed. |
| 37 | S&F in repairs vitreous chinaware wash hand basin white, flat back of size 550x400 mm with pedestal excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets including 32mm bore PVC waste pipe and CP waste coupling complete and fixed in repair complete all as specified and directed by Engr-in-Charge. |
| 38 | S& F in repairs viterous China urinal, bowl type back or corner wall type of size 465x355x265 complete with waste fittings including providing and fixing complete all as specified and directed by Engr-in-Charge. |
| 39 | Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin/kitchen sink complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed. |
| 41 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces complete all as specified and directed by Engr-in-Charge. |
| 42 | Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed by Engr-in-Charge. |
| 43 | Material and labour for cement concrete 1:3:6 type C-2 (40 mm graded crushed stone aggregate) as in post/strut fdn complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F for Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde-E-165 complete all as specified & directed.(75x75x8mm angle use) |
| 45 | Supply and fixing in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and directed by Engr-in-Charge. |
| 46 | Dismantling chanlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as specified and directed by Engr-in-Charge. |
| 47 | Supply only Chain link MS galvanised fencing of wire mesh size 50 mm x 50 mm all as specified |
| 48 | Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails, straining bolts, etc incl provn of binding wire complete all as specified. |
| 49 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 5 to 10 mm diameter of shank, complete all as specified and directed. |
| 50 | Supply and fixing in repairs Barbed rozor tap concertina coil SG hot galvanised spring tensile wire manufactured by make as approved by GE of UTS 220 to 245 Kg/mm2 and dia of coil when stretched 1000 mm having minimum number of circles 10/RM, minimum number of clips 25/RM & minimum weight of coil 1.625Kg/RM hot dip galvanised including taking out existing damaged concertina coil complete all as specified and directed by Engr-in-Charge. |
| 51 | Supply and fixing in repairs Barbed rozor tap concertina coil SG hot galvanised spring tensile wire manufactured by make as approved by GE of UTS 220 to 245 Kg/mm2 and dia of coil when stretched 600 mm having minimum number of circles 10/RM, minimum number of clips 25/RM & minimum weight of coil 1.625Kg/RM hot dip galvanised including taking out existing damaged concertina coil complete all as specified and directed by Engr-in-Charge. |
| 52 | Cleaning of shrubs and bushes every side the security fencing/wall before commencement of work complete all as specified and directed by Engr-in-Charge. |
| 53 | Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer all as specified & directed. |
| 54 | Demolition of RCC concrete in ground floors and paving n exc 15 cm thickness (below and above ground level) complete all as specified and directed by Engr-in-Charge. |
| 55 | M&L for RCC M-25 on Walls, retaining walls,basement walls, ballastwalls and the like; any thickness; above top of footings; including attached pilasters and buttresse complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L for RCC M-25 on Foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basementslabs, under-reamed pilesand mass concrete complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 58 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc verticle or to batter complete all as specified and directed by Engr-in-Charge. |
| 60 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed by Engineer-in-Charge. |
| 61 | M&L for removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed by Eng-In-Charge. |
| 62 | M&L for RCC M-25 on Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge. |
| 63 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work verticle or to batter complete all as specified and directed by Engr-in-Charge. |
| 64 | Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to store and rubnbish of the permises complete all as specified and directed by Engr-in-Charge. |
| 65 | Rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge. |
| 66 | M & L for Glazed ceramic coloured tiles, of size 600x 300x 7 mm thick,as in skirting, dado set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles complete all as specified and directed by Engr-in-Charge. |
| 67 | Screed bed or bedding layer of mortar 15 mm thick average thickness for laying floor finishes in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge. |
| 68 | Non skid ceramic coloured tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.11 Sqm but n.exe 0.18 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for coloured vitrified tiles flooring 8-10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in net slurry and pointed in white or coloured cement to match existing shed complete all as specified and directed by Engr-in-Charge. |
| 70 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge. |
| 71 | Taking down carefully (copper/aluminium) point wiring for ceiling fan/light fitting in ceiling and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engr-in-Charge. |
| 72 | Supply and fixing position suspended false ceiling system using T-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross tee25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm( thickness of the materail of 0.30mm). using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-Charg. |
| 73 | S&F in repairs 100 mm stainless steel but hinges, medium weight quality (ISI Marked), fixed with steel chromium plated bright screws/welded all as specified and as directed. |
| 74 | S&F in repairs 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by EIC. |
| 75 | S&F in repairs 250mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the EIC. |
| 76 | S & F in repairs aluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directed by the EIC. |
| 77 | S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directed by the EIC. |
| 78 | S & F in repairs Door closer hydraulically regulated, aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed. |
| 79 | S F in repairs brass Mortice lock, vertical type, 4 levers, size 100 mm suitable for aluminum doors complete all as specified. |
| 80 | Repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc all as specified and directed by Engineer- in - charge. |
| 81 | Repair to uPVC door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing uPVC snap beading ,re-setting floor/hydraulic spring etc all as specified and directed by Enggineer- in - charge. |
| 82 | Supply and fixing factory made uPVC white color Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110mm both having thickness of 2.3 ± 0.2 mm and single glaxing bead/double glaxing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever requried) exruded profilesd duly reinforced with 1.60 ± 0.2 mm thick galvanized ild steel section made from roll forming process of requried length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and on side key, G.I. fastener 100 x 8mm size for fixing frame to finished wall necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. ( Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiels minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 83 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. Area exceeding 1.00 sqm but not exceeding 2.00 sqm each |
| 84 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 85 | S&F 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, : gear operated type with bevel gear box and crank handle complete |
| 86 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by engr in charge |
| 87 | S&F Ball bearing for rolling shutters complete all as specified and directed. |
| 88 | Overhauling of rolling shutters manually operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on straight for smooth movement of shutter make it complete functional for operating upto the opening of upto12 Sqm complete all as specified and directed. (Note : Each shutter may be overhauled and greased every quaterly) |
| 89 | Overhauling of rolling shutters manually operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on straight for smooth movement of shutter make it complete functional for operating upto the opening of exc 12 Sqm but upto 24 sqm complete all as specified and directed. (Note : Each shutter may be overhauled and greased every quaterly) |
| 90 | Overhauling of rolling shutters mechanically operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on straight for smooth movement of shutter and make it complete functional for operating upto the opening upto 12 Sqm complete all as specified and directed. (Note : Each shutter may be overhauled and greased every quaterly) |
| 91 | Overhauling of rolling shutters mechanically operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on straight for smooth movement of shutter make it complete functional for operating upto the opening of exc 12 Sqm but upto 24 sqm complete all as specified and directed. (Note : Each shutter may be overhauled and greased every quaterly) |
| 92 | Replacement of old tension spring with new spring of size 450 mm for shutter not exc 12 Sqm each complete all as specified and directed by engr in charge |
| 93 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory window & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC poymer of K value 58-60 (Suspension Grade), calcium carbonate and natureal fibers (wood powder/rice husk/ wheat husk) and non toxic aditives (maximum toxicity index of 12 of 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimumm compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture prood and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charged. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 94 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonte and natural fibre (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, allas per direction of Engr-in-chage (Note: stainless steel butt hinges and necessary S.S screws shall be seperately) |
| 95 | Taking down chowkhats or frame exc 4 sqm each complete all as specified and as directed. Please Enable Macros to View BoQ information |
