|
| 1 | Demolition of brick work above GL upto floor two level including stacking of serviceable materials and sisposal of un-serviceable materials with 20mtr. Lead in cement mortar. |
| 2 | Half Brick masonary using common burnt clay building bricks above plinth upto floor two level in cm 1:4(1cement:4sand)conventiohal brick 2 nd class |
| 3 | P/L cement concrete 1:3:6 in foundation & plinth(20mm nominal size) & curing complete excluding the cost of form work and reinforcement in:- |
| 4 | foundation footing and bases of columns & like mass concrete. |
| 5 | 10 mm thick cement plaster on rough sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:3(1cement:3sand) |
| 6 | Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: 2nd class deodar wood. |
| 7 | Providing and fixing antiskid vetrified floor tiles 10 mm thick of any shade and size.600x600x10mm grey /coloured of required shade 12mm thick cement moter 1:3 laid over and jointed with neat cement slurry finished with flush pointing of tiles complete |
| 8 | Providing and laying duro stone verified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3(1cement:3sand)laid over and jointed with neatcement slurry |
| 9 | Providing and laying granite stone in flooring 20mm thick base of cement 1:3 slurry mixed with pigment to match the shade of granite stone rubbing and polishing complete 20mm thick |
| 10 | Providing and fixing 19mm thick Commercial kit ply (HMR) board or equivalent water proof shutters for Cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 11 | Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica ) on boards /ply wood sheet with approved adhesive and nails etc complete. |
| 12 | Providing and fixing wooden plankceiling in Pine wood wall celling with tongued and groovedjointing and wood screws (framework and cover fillets to bemeasured and paid for separately |
| 13 | Providing and fixing 19mm thick Commercial kit ply (HMR) board or equivalent water proof shutters for Cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 14 | Polishing two coats with Natural wood Polish on new wood and wood based surfaces to give an even surface Including cleaning the surface of all dirt dust and sand papered smooth and including a coat of wood filler |
| 15 | Providing and fixing panelled glazed panelled or Shattering in rooms cilling etc.2nd class d/wood |
| 16 | Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: 2nd class deodar wood. |
| 17 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil grease & dirt and other foreigm matter |
| 18 | Painting two coats(excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give even shade including cleaning all dirt, dust and other foreign matters white paint |
| 19 | White washing with lime on undecorated wall surfaces(two coats) to give an even shade I/c thoroughly brooming the surface to remove all dust dirt & other foreign matter. |
| 20 | Providing and fixing brass double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium / wooden door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors. |
| 21 | Providing and fixing magnetic catcher (M-15) including carriage of materials within all leads and lifts. |
| 22 | Providing and fixing Stainless Steel almira lock chorme withscrews etc. complete. |
| 23 | Providing and fixing aluminium handles anodized transparent or dyed to requiredcolour & shade with necessary screws etc. complete. 1210601000 100mm, 125mm, 150 |
| 24 | Providing and fixing channel for cup Board with the necessary screws etc complete |
| 25 | P/F Pillar Tap for wash basin cera Company |
| 26 | P/F Vitrious china water closet for toilet Sheet |
| 27 | Men chamber pot or urinal in mem toilet |
| 28 | P/F C.P Brass bib Tap with Capastain Head |
| 29 | P/F C.P Brass waist for wash basin or sink |
| 30 | P/F Cromium plate C.P Brass Soap Dish |
| 31 | P/F C.P Brass Towel Rod |
| 32 | P/F Plastic Pipe |
| 33 | P/F Jaali |
| 34 | P/F C.P Brass bib Mixture Tap with Capastain Head |
| 35 | P/F C.P Angle cock victor |
| 36 | Providing and fixing anodiased coated aluminioum work of door windows ventilators and partions with extuded built up standard tubar and other sections of approved make conforming to Is 733 and Is 1285 anodized transparent or dyed to required shade according to Is 1868 fixing with dash fasteners of reqired dia and size including necessary filling up the gaps at junctions i.e at top bottom and sides with required EPDM rubber /neoprene gaskit etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium sanp beading for glazing / paneling C.P brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing , paneling and dash fasteners to be paid for separately ) : for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron ) |
| 37 | Providing and fixing anodiased coated aluminioum work of door windows ventilators and partions with extuded built up standard tubar and other sections of approved make conforming to Is 733 and Is 1285 anodized transparent or dyed to required shade according to Is 1868 fixing with dash fasteners of reqired dia and size including necessary filling up the gaps at junctions i.e at top bottom and sides with required EPDM rubber /neoprene gaskit etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium sanp beading for glazing / paneling C.P brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing , paneling and dash fasteners to be paid for separately ) : for shutters of doors windows & ventilators incliding providing and fixing hinges / pivots and making provision for fixing of fittings wherever reqired including the coast of EPDM rubber/ neoprene gasket required (fitting shall be paid for separately ) powder coated aluminium (minimum thickness of powder coating 50 micron ) |
| 38 | Providing and fixing aluminium door stoper with rubber cushion 100 mm including carriage of materials within all leads and lifts :- |
| 39 | Providing and fiiing glazing in aluminium door windows shutters with PVC neopene gaskets etc as per arch Drg and the direction of Engineer in charge 5mm thick within a leds and lifts direction of Engineer in charge |
| 40 | Providing and fixing glazing in aluminium door, window,ventilator,shutter and partitions etc.with EPDM rubber/neoprene gasket etc.complet as per the architectural drawing and the direction of Engineer in charge.floaqt glass panes of 5.50mm thickness |
| 41 | Providing and fixing aluminium round shape handle of outer dia 100mm with ss screws etc.complete as per direction of ingineer in charge powder coted minimum thickness 50 micron aluminium. |
| 42 | Providing and fixing 100mm bras locks (bestmake of approved quality) for aluminium door including necessery cutting and making good etc.complete. |
| 43 | Providing and fixing ISI marked oxidised ms torbolts aluminium finish(barrel type) with necessary screws etc.complete: |
| 44 | Providing and fixing ISI marked oxidised ms pressed butt hings with necessary screws etc. Complete.100mm. |
| 45 | Providing and fixing 4mm thick ACP sheet in type ii in panelling fixed in aluminum doors ,windows shutters and partition frames with C.P Brass /stainless steel screws etc complete as per architectural drawinges and directions of engineer in charge |
| 46 | Provinding and fixing stainless steel (grade 304) railing made of hollow tube , channels, plates etc. Including welding, grinding, buffing, polishing and makinf curvature and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in charge. Please Enable Macros to View BoQ information |
