|
| 1 | Description |
| 2 | Demolishing brick/ stone work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer -in-charge. In cement mortar |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. |
| 4 | Dismantling and refixing of PVC rain water pipe, including cost of shifting, fixing charges and all other incidental charge etc. complete as directed by the department |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge. |
| 6 | Epoxy bonding of new concrete to old concrete |
| 7 | Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications including providing and removing formwork, centering & scaffolding. (The cost of steel reinforcement & dowel bars to be paid separately) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates |
| 8 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - all other type of structure` |
| 9 | \\"Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6\\" |
| 10 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge |
| 11 | Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. |
| 12 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. the granite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevant IS codes, machine mixed, laid in layers not exceeding 150mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, usage charges of machineries, curing and all other appurtenances required to complete the work as per technical specifications including providing and removing formwork, centering & scaffolding. (The cost of steel reinforcement & dowel bars to be paid separately) Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates |
| 13 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x1200 mm |
| 14 | Providing and laying flooring and steps fine machine polished anti skid granite stone slabs 20 mm thick of any colour with half rounding the edges wherever necessary on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed, including cost of materials, mortar, labour, curing complete as per specifications. |
| 15 | Providing and fixing of wall cladding using 20mm thick approved colour gang saw water cut granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete |
| 16 | Providing and fixing 65mm G.I. B class pipe of approved make and quality, including cost of materials, labour charges, welding, painting fixing transportation charges and all other incidental charges etc. complete |
| 17 | Providing false ceiling using 9mm thick PVC sheets supported with aluminium T&L sections(0.3mm thick) having 25mm flange & web. The aluminium frame work should be fixed to ceiling with necessary aluminium fixtures like Flats/GI wire with adjustable J Bolts etc with frames at 600 c/c to fix the ceiling panels in position etc complete with all cost of materials T&P labour and all other incidental charges etc., complete. |
| 18 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Please refer BOQ in the tender document for detailed specification) |
| 19 | \\"Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.\\" |
| 20 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge |
| 21 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size – 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) |
| 22 | Providing and fixing white vitreous China clay, water closet European type size 540x360x340 ( Wall mount type, Ptrap ) with Stain less steel bolts to fix in the wall, white solid plastic seat and lid, C.P brass hinges, rubber buffers, concealed flushing cistern ( all are approved make ) with fittings, overflow arrangements with special, health faucet and 25mm mosquito proof coupling of approved design, painting of fittings, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. |
| 23 | Providing and fixing in position table mounted wash hand basin of any shape, white or colour vitreous China clay of size varying 450 to 550 as approved by the department including long body CP fancy piller cock touch less (sensor) with connection pipe, brass stop cock, CP waste nipple of approved quality (screwed end) 20mm nominal bore including cost of materials, labour complete as per specifications. |
| 24 | Providing and fixing white vitreous china clay, flat back or half stall urinal basin of size 600x370x390mm with auto sensor flushing system, C.I/M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps C.I d trap with outlet grating and other couplings in C.P brass, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. |
| 25 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. |
| 26 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 27 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. (Concealed work including cutting chases and good the walls etc.) for 50 mm nominal dia. pipe. |
| 28 | \\"Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete -Premium Class\\" |
| 29 | Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete Premium Class |
| 30 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 100 mm nominal dia Pipes |
| 31 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 15 mm nominal dia Pipes |
| 32 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 33 | Providing & fixing 30mm thick factory made rigid foam Prelam Paneled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.. ( with both side prelam) |
| 34 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge |
| 35 | Fabricating and fixing MS angle/channel truss including cost of materials, cost of labour, welding, cutting, bending, fixing charges, including all necessary fittings, painting with epoxy paint 2 coat with one coat of primer, transportation charges and all other incidental charges etc. complete |
| 36 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 37 | Providing & laying virtual self-adhesive, Tarfelt APP modified prefabricated five layers 1.5mm thick water proofing membrane of approved make weighing 1.90kg/Sqmt plus or minus 5% having long fiber 100 gsm non oven polyster mat core with release film on one side, having tensile strength of > 250 n/5cm longitudinal > 150 n/cm Transverse, Elongation of > 30% in both transverse and logitudinal and fillar content not exceeding 50% apply tar felt APP with a coat of cold adhesive shalibond APP (primer cum bonding adhesive) at 0.33kg/sqmt and seal all joints with overlap of 100mm both sides including protection of membrane with UV resistant aluminium paint super silver shield complete as per specification including cost of all materials, labours charges, tools and plants upto a height of 15M and scaffolding, cleaning and washing charges etc. complete as directed by the department (The Warranty Period is five years) |
| 38 | Providing and fixing wall mounted stainless steel chrome finish bath room tissue paper holder 16cmx8.5cm of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications and as per directions of Engineer-in-charge |
| 39 | Providing and fixing wall mounted stainless steel matt finish Hand dryer touch free, hand dry time 7 to 10 seconds, auto cutoff 30 seconds noise level 70Db(A), 24000RPM, 220V/50Hz of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications and as per directions of Engineer-in-charge |
| 40 | Providing and fixing wall mounted stainless steel automatic sensor hand wash dispenser 250ml of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications and as per directions of Engineer-in-charge |
| 41 | Providing and fixing wall mounted polycarbonate ABS casing automatic air freshener spraying machine of size 57mmx86mmx170mm of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications and as per directions of Engineer-in-charge |
| 42 | Providing and fixing stainless steel 200mm dia towel ring of approved make including cost of all materials, labour and HOM of equipment’s with all leads complete as per specifications and as per directions of Engineer-in-charge |
| 43 | Providing and fixing stainless steel 24 inch dual folding towel rack/stand/hanger of approved make including cost of all materials, labour and HOM of equipment’s with all leads complete as per specifications and as per directions of Engineer-in-charge |
| 44 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. |
| 45 | Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. |
| 46 | \\"Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Please Enable Macros to View BoQ information |
