|
| 1 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed. |
| 3 | S & F Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 4 | S &F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 5 | M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good all as specified and directed. |
| 6 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. Make : Century Ply, Green Ply, Archid Ply or equivalent as approved by GE. |
| 7 | S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and directed. |
| 8 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing etc complete all as specified and directed. |
| 9 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed. |
| 10 | S&F three track powder coated anodised aluminium sliding window having two glass shutter and one gauge shutter top and side frame made up 123.45 mm /44 mm 1.5 mm, bottom 128mm/39.15/1.63mm thick aluminium section & shutter made up 69mm/25.40mm/1.63mm and 50.80 mm / 25.40 mm/1.3 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc as directed by engr in charge. making good, all other connected fittings (Note: The unit rate quoted by contractor exclude cost of glass and gauge includes) complete all as specified and directed. |
| 11 | S&F powder coated anodised aluminium fixed ventilaters having half fixed with frosted glass 4 mm thick and half 100mm wide glass 4 mm thick louvers frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc as directed by engr in charge.(Note: The unit rate quoted by contractor include cost of glass and includes making good, all other connected fittings complete all as specified and directed. |
| 12 | S&F powder coated anodised aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron) complete all as specified and directed. |
| 13 | S&F powder coated anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron). |
| 14 | S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed. |
| 15 | S & F 4 mm thick frosted glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed. |
| 16 | Supply and fixed Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 17 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 Including Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided ,complete all as specified and directed. |
| 18 | Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified. |
| 19 | M&L in repair 18/19 mm thick pre-laminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in alum frame work, complete all as specified and directed. |
| 20 | S&F mild steel flat iron of size 50x3mm as in hold fast complete all as specified and directed. |
| 21 | S & F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21, complete all as specified and directed. |
| 22 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed , complete all as specified and directed. |
| 23 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 24 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 25 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed. |
| 26 | Glazed ceramic coloured tiles in vertical surfaces 450x 300x 7 mm thick set and jointed in Adhesive compound as per manufacturer instruction & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises, complete all as specified and directed. |
| 27 | M&L Non - skid Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in Adhesive compound as per manufacturer instruction and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises, complete all as specified and directed. |
| 28 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in Adhesive compound as per manufacturer instruction and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises, complete all as specified and directed. |
| 29 | M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,including rubbing, rounding of edge stone slab and polishing including dismantling old stone slab complete all as specified and directed. |
| 30 | Demolition Reinforced Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed. |
| 31 | M&L for Reinforced cement concrete nominal mix M15 (B0) 1:2:4 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,complete all as specified and directed. |
| 32 | M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etc binding with mild steel wire not less than 0.90 mm dia (annealed) complete all as specified and directed. |
| 33 | Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level),complete all as specified and directed. |
| 34 | M&L for 75 mm thick cement concrete as in plinth protection/ path etc type C-2 1:3:6 (using 40mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and directed. |
| 35 | Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed. |
| 36 | M&L for brushing neat cement slurry with 03 Kg of cement per Sqm, complete all as specified and directed. |
| 37 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound, complete all as specified and directed. |
| 38 | M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate, complete all as specified and directed. |
| 39 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following course of treatment/specification complete all as specified and as directed:-(i) Applying one coat of bituminous primer @0.40 Ltr/Sqm.(ii) Laying of 3mm thick APP based polymeric membrane of approved manufacturer with weight not less than 3.50 Kg/Sqm, reinforced with non-woven polyster fabric weight not less than 160 gm/Sqm. Polymeric membrane shall be taken to a height of 30 cm(minimum) and then inserted inside the groove of parapet wall and wall shall be finished by a membrane plastering.(iii) Two coats of solar reflective bituminous aluminium paint of approved approved based to provided over APP membrane as per manufaturer instruction. Note : (a) Work shall be carried out through specialized applicator approvrd by GE. Contractor shall submit sufficent documents/Credentials in support of Applicator whom he wants the work excuted.(b) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (c) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. |
| 40 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including Taking down rain water pipes inculding all fittings any size and pattern,complete all as specified and directed. |
| 41 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls including Taking down rain water pipes inculding all fittings any size and pattern, complete all as specified and directed. |
| 42 | S & F 110 mm bore PVC (SWR) bends of any radius,complete all as specified and directed. |
| 43 | S & F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 44 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door,complete all as specified and directed. |
| 45 | S & F 110 mm bore PVC (SWR) Vent Cowl, complete all as specified and directed. |
| 46 | Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 47 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 48 | M & L for preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 49 | M&L 75 mm bore for PVC (SWR) multi floor trap with grating including jointing with solvent cement,complete all as specified and directed. |
| 50 | Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store,complete all as specified and directed. |
| 51 | Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store,complete all as specified and directed. |
| 52 | Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store,complete all as specified and directed. |
| 53 | S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalen make / model with all accessories,complete all as specified and directed. |
| 54 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand and waste pipe as requred complete all as specified an as directed. |
| 55 | S&F in repair vitreous china, orrisa squatting pan of pattern water closet seat of size 580mm x 440mm white with and incl 'P' or 'S' trap and provision of lime concrete bedding in repairs,complete all as specified and directed. |
| 56 | Supply & Fix in repairs Vitreous China (Pedestal pattern) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. pipe) complete in all respect all as specified. “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) ,complete all as specified and directed. |
| 57 | PVC connection 15 mm bore 450 mm long,complete all as specified and directed. |
| 58 | S & F in repairs 15mm bore angular concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions,complete all as specified and directed. |
| 59 | S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed,complete all as specified and directed. |
| 60 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule,complete all as specified and directed. |
| 61 | S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms),complete all as specified and directed. |
| 62 | Supply and fix 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers incl taking down old one,complete all as specified and directed. |
| 63 | Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint,complete all as specified and directed. |
| 64 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc,complete all as specified and directed. |
| 65 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed. |
| 66 | M&L for half brick work burnt modular bricks built in cement mortar 1:4 straight or curved on plan exceeding 6mtr mean radius ,complete all as specified and directed. |
| 67 | M&L for 15mm thick plaster in two layers on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight of cement face of conc work to wall surface and the surface is finished even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately |
| 68 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth,complete all as specified and directed. |
| 69 | M&L rendering 5mm thick of cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth(without using extra cement.),complete all as specified and directed. |
| 70 | Supply only Integral water proofing compound complete all as specified and directed. |
| 71 | Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick acrylic wall care putty,complete all as specified and directed. |
| 72 | M & L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick acrylic wall care putty,complete all as specified and directed. |
| 73 | M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick acrylic wall care putty,complete all as specified and directed. |
| 74 | M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick acrylic wall care putty,complete all as specified and directed. |
| 75 | Preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash,complete all as specified and directed. |
| 76 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete,complete all as specified and directed. |
| 77 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks four layered (cylinder vertical with class top) white colour hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed Including dismantling PVC/RCC water tanks and removing to store n exc 500 ,complete all as specified and directed. |
| 78 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for,complete all as specified and directed. |
| 79 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors,complete all as specified and directed.NOTE: Water proofing compound will be measured separately |
| 80 | M&L applying one coat of FOSROC Nitoproof 600 PF Waterproofing component to sides and bottom of floors to sunken floors,complete all as specified and directed. |
| 81 | M & L for plain cement concrete Type E2 1:5:10 (using 40mm graded granite stone aggregate) in foundations, filling and mass concrete,complete all as specified and directed. |
| 82 | M & L for 25 mm thick plain cement concrete Type B1 1:2:4 (using 20mm graded granite stone aggregate) in floor sub base and mass concrete, complete all as specified and directed. |
| 83 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar of dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm, complete all as specified and directed. |
| 84 | S&F for health faucent (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 85 | Dismantling plain or corrugated steel sheeting any thickness in roof covering,complete all as specified and directed. |
| 86 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based corrugated steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler including dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering as specified. |
| 87 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler including dismantling plain or corrugated steel sheeting any gauge ,thickness in roof covering as specified. |
| 88 | Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided for,complete all as specified and directed. |
| 89 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and directed. |
| 90 | Excavation in post holes or simillar hole each n exc. 0.5 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25cm in soft/loose soil ,complete all as specified and directed. |
| 91 | M&L Cement Concrete 1:4:8 (40mm graded aggregate) in Foundations, Filling and Mass Concrete including use and waste Formwork as ordered/required at Site, complete all as specified and as directed. |
| 92 | M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in foundation filling / mass concrete,complete all as specified and directed. |
| 93 | Taking down carefully existing unserviceable copper/ aluminium point wiring (light,fan , call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, bell push,call bell,bracket light fittings and making good to the disturbed surface complete all as directed by Engr-in-Charge. |
| 94 | Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified by Engr-in- Charge. |
| 95 | Taking down carefully unsv aluminium submain wiring of any type /location including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge. |
| 96 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed. Please Enable Macros to View BoQ information |
| 97 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed. Please Enable Macros to View BoQ information |
