|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres. Of area 3 sq. metres and below |
| 3 | Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) For thickness of tiles above 25mm and upto 40mm |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level. In Cement mortar 1:4 (1 cement :4 coarse sand) complete including carriage of materials in all leads and lifts |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 2nd class deodar wood |
| 10 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Rae wood/ Chill wood |
| 11 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Deodar wood wood 40 mm thick shutters |
| 12 | Providing and fixing UPVC casement door profile specfication :-outer frame work 12601 (70mm*64mm), Sash-12617(70mm*70mm) Z section Mullions- 3086(70mm*50mm), coupling -12358 (70mm) including shutters with chamber thicknes 1.20 to 2.00 mm and 6mm+12mm + 6mm DGU toughned Glass gap filled with argon Gas fixed with thermoplastic elastomer (TPE) gasket including Zinc alloy casement handle, Friction stay/2D hinges/butt hinges, espag multipoint locking system, locking strickers complete in all leads and lifts including carriage of materials and as per the direction of the Engieer-in-charge |
| 13 | Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately including complete including carriage of material in all leads and lifts |
| 14 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts |
| 15 | Providing and fixing 19mm thick Commercial Board shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts |
| 16 | Providinh and fixing 4mm thick teak ply wood lining with butt jointing and nails etc. (frame work and cover fillets to be measured and paid for separately) including carriage of material with in all leads and lifts |
| 17 | Providing and fixing 12mm thick imported pine wood ceiling/paneling with tongued and grooved jointing of standard quality ISI mark and approved shade and colour complete including carriage of material within all leads and lifts as per direction of Engineer-in-Charge |
| 18 | Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts:-Plain Glass:6mm thick coloured glass. including carriage of materials in all leads and lifts |
| 19 | Providing and fixing brass Sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm |
| 20 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete, including carriage of materials within all leads and lifts.150x10 mm |
| 21 | Providing and fixing bright finished brass handles with screws etc. complete, including carriage of materials in all leads and lifts.150mm |
| 22 | 125mm |
| 23 | Providing and fixing drawer lock with fittings complete, including carriage of materials in all leads and lifts |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials within all leads and lifts.Size of Tile 600x600 mm |
| 25 | Providing & Fixing 1st quality ceramic glazed wall tiles of size 300x450mm conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 26 | Kota stone slab flooring 22mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete including carriage of materials in all leads and lifts |
| 27 | providing and laying1.50 mm thick pvc/rubber tiles flooring (L.G. Make) plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts |
| 28 | Providing and laying marble work (Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick Baroda green marble including carriage of materials within all leads and lifts |
| 29 | Making rounded/ half rounded nosing in granite/kota stone complete. 20mm.thick including carriage of materials within all leads and lifts |
| 30 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) |
| 31 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 32 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5.00 mm thickness weight not less than 12.50 kg / sqm |
| 33 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides |
| 34 | Providing and fixing aluminium Sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm |
| 35 | Providing and fixing aluminium tower bolts (barrel type) with necessary screws etc. complete : including carriage of materials within all leads and lifts.(i) 150x10mm |
| 36 | Providing and fixing aluminium handles, ISI marked,or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts (i) 125mm |
| 37 | 15mm cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 |
| 38 | Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of matyerial in all leads and lifts |
| 39 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts |
| 40 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface. including carriage of materials in all leads and lifts |
| 41 | Wall painting One coats on old work with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade y as required for making the surface. including carriage of materials in all leads and lifts |
| 42 | Providing and applying white wood based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 43 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 44 | Painting steel work with Deluxe Multi Surface Paint of required shade One or more coat applied of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 45 | Providing Melamine polishing on wood work (Two or more coats applied on New work) complete including carriage of materials within all leads and lifts |
| 46 | Providing and fixing roller blind made of polyster/ blackout fabric of approved shade and make, complete with roller tube, spring/ chain operated machanism, bottom bar, side brackets and all accessories, including fixing in position, complete including carriage of materials in all leads and lifts |
| 47 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore |
| 48 | Providing and fixing high pressure PVC (Finolex) type-A spigot and socket, waste and ventilating pipes including collar and clamps ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-(i) 75 mm dia |
| 49 | Providing and fixing PVC (finolex ) Plain bends 75 mm nomonal size, including carriage of materials within all leads and lifts |
| 50 | Providing and fixing PVC (finolex ) collars 75 mm nomonal size, including carriage of materials within all leads and lifts |
| 51 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc.complete including carriage of materials within all leads and lifts 110mmX75mm |
| 52 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid |
| 53 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved complete.including carriage of materials within all leads and lifts |
| 54 | Providing and fixing stainless steel kitchen sink 610mm X 510mm with bowl depth 200mm size with drainage board of approved make with C. I. or M. S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts |
| 55 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.including carriage of materials within all leads and lifts |
| 56 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings including carriage of materials within all leads and lifts |
| 57 | Providing and fixing PVC connection pipe with brass union including carriage of materials within all leads and lifts :-300/450mm length :-15mm nominal bore |
| 58 | Providing and fixing 15mm dia CP brass Sink mixer of approved quality complete including carriage of materials in all leads and lifts |
| 59 | Providing and fixing 15mm dia CP brass Basin mixer of approved quality complete including carriage of materials in all leads and lifts |
| 60 | Providing and fixing 15mm dia CP brass angle cock of approved quality complete including carriage of materials in all leads and lifts |
| 61 | Providing and fixing 15mm dia CP brass Bib cock of approved quality complete including carriage of materials in all leads and lifts |
| 62 | Providing and fixing looking mirror of size 600mmx450mm with plastic frame (superior quality) including backing support and fixing with screws etc at site as directed by Engineer-in-charge including carriage of materials within all leads and lifts |
| 63 | Providing and fixing 600mmx120mm acraylic glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts |
| 64 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts |
| 65 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws etc. complete including carriage of materials within all leads and lifts |
| 66 | Providing and fixing C.P. Brass Towel ring complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials within all leads and lifts |
| 67 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved Please Enable Macros to View BoQ information |
