|
| 1 | Steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of lead paint in beans joints channels angles tees flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins and connected to common rafters and the like as per specification. |
| 2 | Providing and fixing 12mm thick prelaminated board both bwp phenol bounded exterior/interior gauge paneled shutters with frame of first class deodar wood door including bright finished/black enameled iron butt hinges with necessary screws. 40mm thick within all leads and lifts. |
| 3 | Brick work using common burnt clay building bricks in cement mortar 1:6 (1cement6sand) in foundation and plinth II nd class bricks |
| 4 | Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.2nd class deodar wood. |
| 5 | Providing and fixing paneled glazed or paneled and glazed shutters for door, windows and clerestory windows including black enameled iron but hinges with necessary screws(i) 40mm thick, 2nd class deodar wood including all leads and lifts, as per HPPWD, specification of 1990 volume-I, as directed by the Engineer-In-Charge. |
| 6 | Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. |
| 7 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 8 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 9 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. |
| 10 | Providing and fixing M.S. BP Sheet 1.66mm to 2.00 mm thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) |
| 11 | Providing and fixing vitreous China wash down, water closet(European Type W.C Pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement: 1sand)(seat and cover to be measured and paid for separately (i) Anglo Indian including all leads and lifts, as per HPPWD, specification of 1990 volume-I as directed by the Engineer-In-Charge |
| 12 | Supplying and Fixing wovwnplains G.I wire fencing of mesh 50mm to 150mm to any type of standerd rails etc. including pprovision of binding wire staples etc. |
| 13 | Providing and fixing 600x450mm bevelled edge mirror or superior glass mounted on 6mm thick a.AC sheet or plywood sheet and fixed to wooden plug with C.P brass screws and washers including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge. |
| 14 | Providing and fixing C.P brass Towell rail complete with C.P brass brackets fixed to wooden plugs with C.P Brass (i) 600mmx20mm including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge. |
| 15 | Providing and fixing toilet paper holder:- C.P Brass including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge. |
| 16 | Providing and fixing charomium plated brass soap dish with C.P Brass brackets fixed to wooden cleats with C.P brass including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge. |
| 17 | Providing and fixing C.P Brass bib tap with capstan head (i) 15mm dia including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge |
| 18 | Providing and fixing C.P Stop cocks(i) 15mm dia including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge. |
| 19 | Providing and fixing1000 liters net capacity PVC water storage tank of ISI:12701 marked,G.I .inlet and outlet connection 15 mm niminal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground including carriage of materials within all leads and lifts by all means & other incidentals. |
| 20 | Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and macking good the same but excluding fittings FLAT BACK category No 1025 including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges |
| 21 | Providing and fixing ISI marked high pressure PVC (finolex) of working pressure not less than 4.5 kg/sqm in trenches including fixing of joints properly with approved adhesive complete in all respects including carriage of materials within all leads and lifts as per direction of Engineer in charge |
| 22 | Constructing manhole with R.C.C top slab in 1:2:4 mix in (1cement: 2sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1cement: 4sand: 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1cement: 2sand: 4 graded stone aggregate 20mm nominal size) finished smooth complete including cutitng and testing Inside size 800x800mm and 500mm deep including C.I cover with frame light duty single seal pattern (i) 450x610mm internal diamention total weight of cover and frame to be not less than 38 Kg (weight of cover 23 Kg and weifht of frame 15 Kg) (a) With 200mm thick walls of brick masonry using comon burnt clay building bricks in cement mortar 1:3 (1cement: 3sand) including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge. Please Enable Macros to View BoQ information |
