Tender For Construction Of Mata Mansa Bhawan Office Building In Mansa Devi Complex, Sector 5D, Mdc, Panchkula Including Civil Work, Public Health Work, Electrical Internal And External Work, Fire Fighting, Cctv Camera And Lift Complete In All Respect, Panchkula-Haryana

TDR : 55924332

Tender Notice
BOQ

20 Days Left

Panchkula , Haryana

Tender Brief : Tender For Construction Of Mata Mansa Bhawan Office Building In Mansa Devi Complex, Sector 5D, Mdc, Panchkula Including Civil Work, Public Health Work, Electrical Internal And External Work, Fire Fighting, Cctv Camera And Lift Complete In All Respect

Document Fees
₹ 5000 /-

EMD
₹ 3681400.0 /-

Tender Value
₹ 18.40 Crore /-

Submission Date
01-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	[10.1]Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. [Through Rate]
2	[10.14]Providing a floating coat of 1.50 mm thick neat cement laid in one operation to the topping. [Through Rate]
3	[10.15]Extra for using hardener at top surface (3.5Kg /sqm) of trimix M25 to finish surface complete in all respect [Through Rate]
4	[10.3]Supplying and providing of Tangri River Sand under floors Including watering and compaction in 25cm layers, dressing etc. complete In all respects (As per item 10.2) [Through Rate]
5	[10.30.2]Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 2. Medium shade pigment using 50% white cement 50% Grey cement [Through Rate]
6	[10.4]Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. [Through Rate]
7	[10.50.1]Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. [Through Rate]
8	[10.69.3]Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 3. Size of Tile 800x800 mm [Through Rate]
9	[10.70.3]Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 3. Size of Tile 800x800 mm [Through Rate]
10	[11.1.1]6 mm cement plaster of mix : 1. 1:3 (1 cement : 3 fine sand) [Through Rate]
11	[11.17]Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge [Through Rate]
12	[11.4.2]10 mm thick cement plaster 2. 1:3 (1 cement: 3 fine sand) [Through Rate]
13	[11.5.1]12 mm cement plaster of mix : 1. 1:2 (1 cement: 2 fine sand) [Through Rate]
14	[11.5.2]12 mm cement plaster of mix : 2. 1:3 (1 cement: 3 fine sand) [Through Rate]
15	[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [Through Rate]
16	[11.52]Cement rendering on plaster 1 mm thick [Through Rate]
17	[11.59]Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. [Through Rate]
18	[11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand) [Through Rate]
19	[11.7.2]20 mm cement plaster of mix : 2. 1:6 (1 cement: 6 fine sand) [Through Rate]
20	[11.98.1]Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 1. New work (Two or more coats applied @ 1.43 litre/ 10 sqm Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm [Through Rate]
21	[12.121]Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer`s specification and direction of Engineer-in-charge. [Through Rate]
22	[12.122.2]Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement and self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm and 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer`s specifications and direction of Engineer-in-charge. 2. Decorative finish (both side wood grained finish) [Through Rate]
23	[12.126]Providing and Fixing factory made uPVC door frame, made of uPVC extruded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing and fixing 3 Nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fasteners, all complete as per manufacturer`s specification and direction of Engineer-in-charge. [Through Rate]
24	[12.131.4]Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware`s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm) [Through Rate]
25	[12.133.2]Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware`s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 2. Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door up to 2.50 sqm) [Through Rate]
26	[12.138]Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. [Through Rate]
27	[12.142]Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. [Through Rate]
28	[12.154]Providing and fixing glazing in fire resistant door shutters, fixed panels and partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, and special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity and radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW and EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm [Through Rate]
29	[12.160.1]Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 1. With stainless steel cover plate minimum 1.25 mm thickness [Through Rate]
30	[12.164]Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. [Through Rate]
31	[12.177.1]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 1. With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [Through Rate]
32	[12.89]Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. [Through Rate]
33	[12.98.1]Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 1. 300x16 mm [Through Rate]
34	[13.41]Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). [Through Rate]
35	[17.73]Construction of unreinforced plain cement concrete pavement in M-25 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORTH specifications [Through Rate]
36	[18.7]Providing and fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials and Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboo wood planks shall have minimum density of 1000 kg/cum and minimum Hardness 1000 kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. [Through Rate]
37	[18.8]Providing and fixing in position Phenol bonded Bamboo wood in wall skirting with planks of sizes 14mm thick, 1900mm length (minimum) and 85mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials and Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws and rawl plugs, over underlayment of 4mm thick, expanded polyethylene foam sheets having 40kg/cum density over prepared surface. The bamboo wood planks shall have minimum density of 1000kg/cum and minimum Hardness 1000 kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. [Through Rate]
38	[20.25.1]Cutting holes up to 23 cm square through brick work in mud walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 1. 11.43 cm thick wall [Through Rate]
39	[20.25.2]Cutting holes up to 23 cm square through brick work in mud walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 2. 22.86 cm thick wall [Through Rate]
40	[20.71.1]Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 1. 48\\" (1200mm) [Through Rate]
41	[20.71.2]Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 2. 56\\" (1400mm) [Through Rate]
42	[20.72]Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. [Through Rate]
43	[21.28]Providing and fixing steel bar embedded plastic steps of size 263mm x 165mm of orange colour, confirming to specification in pump chambers, manholes etc., having minimum 3mm thick polypropylene polymer confirming to is:10910 encapsulated on 12mm dia ribbed steel bars per IS :1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1:2:4 cement concrete including carriage, loading, uploading, stacking, handling, re-handling etc., complete in all respect to the satisfaction of Engineer-in-charge [Through Rate]
44	[21.57.1.2]Providing masonry plugs to ends of sewers of all types with 11.43 cm thick brick wall in cement sand mortar 1:7 with 12 mm thick cement plaster 1:6 (as required by the engineer-in-charge). 1.2. For Circular sewers having internal diameter - 150 mm [Through Rate]
45	[21.84.1]Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 1. Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping [Through Rate]
46	[21.84.2]Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 2. Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping) [Through Rate]
47	[21.85.1]Extra for every 0.30 metre depth of Inspection chamber 1. 450 mm x 450 mm inside [Through Rate]
48	[21.85.2]Extra for every 0.30 metre depth of Inspection chamber 2. 450 mmx 600 mm inside [Through Rate]
49	[21.93.2]Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. 2. Type:- Extra Heavy Duty Set (EHD-20) 560MM Clear Opening [Through Rate]
50	[22.1.4]Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 4. White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap [Through Rate]
51	[22.10.1.2]Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 1.2. Kitchen sink with drain board 510x1040 mm bowl depth 225 mm [Through Rate]
52	[22.10.1.3]Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 1.3. Kitchen sink with drain board 510x1040 mm bowl depth 200 mm [Through Rate]
53	[22.103.3]Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore [Through Rate]
54	[22.105.1]Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 1. 15 mm nominal bore [Through Rate]
55	[22.106.1]Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1. 15 mm nominal bore [Through Rate]
56	[22.107.1]Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore [Through Rate]
57	[22.108.1]Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore [Through Rate]
58	[22.109]Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. [Through Rate]
59	[22.117]Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. [Through Rate]
60	[22.118]Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. [Through Rate]
61	[22.119.2]Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 2. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. [Through Rate]
62	[22.123.1.1]Providing and fixing PTMT grating of approved quality and colour. 1.1. Circular type 100 mm nominal dia [Through Rate]
63	[22.127]Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. [Through Rate]
64	[22.128.1]Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 1. 15 mm nominal bore with 30cm length [Through Rate]
65	[22.128.2]Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 2. 15 mm nominal bore with 45 cm length [Through Rate]
66	[22.129.1]Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 1. 15 mm nominal bore, weighing not less than 32 gms [Through Rate]
67	[22.129.2]Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 2. 20 mm nominal bore, weighing not less than 40 gms [Through Rate]
68	[22.129.3]Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 3. 25mm nominal bore, weighing not less than 62 gms [Through Rate]
69	[22.15]Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer-in-charge. [Through Rate]
70	[22.16]Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint [Through Rate]
71	[22.163.1]Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 1. 100 mm diameter [Through Rate]
72	[22.163.2]Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 2. 150 mm diameter [Through Rate]
73	[22.163.3]Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 3. 200 mm diameter [Through Rate]
74	[22.164.1]Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 1. 100 mm diameter S.W. pipe [Through Rate]
75	[22.164.2]Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 2. 150 mm diameter S.W. pipe [Through Rate]
76	[22.164.3]Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 3. 200 mm diameter S.W. pipe [Through Rate]
77	[22.166.2.1]Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 2.1. 150 x 100 mm size P type With common burnt clay non-modular bricks of class designation 7.5 [Through Rate]
78	[22.168.3]Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 3. 250 mm dia. R.C.C. pipe [Through Rate]
79	[22.168.4]Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 4. 300 mm dia. R.C.C. pipe [Through Rate]
80	[22.168.5]Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 5. 450 mm dia. R.C.C. pipe [Through Rate]
81	[22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. [Through Rate]
82	[22.20.2]Providing and fixing in position C.I. plain Nahani Trap conforming to I.S.I. specifications and of self cleaning design with C.P. brass hinged grating with frame complete 2. With 75 mm internal diameter outlet [Through Rate]
83	[22.209]Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. [Through Rate]
84	[22.211]Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. [Through Rate]
85	[22.212.1.3]Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P. brass screws and rawl plugs etc. complete including cutting and making good the walls etc. 1.3. C.P Brass Three Way [Through Rate]
86	[22.214]Providing and fixing in position best Indian make C.P. brass Tumbler cum Tooth Brash holder fixed in with rawl plugs with C.P. brass screws and complete including cutting and making good the walls etc. [Through Rate]
87	[22.217]Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in-charge) complete in all respect. [Through Rate]
88	[22.221.6]Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. 6. Size 560mm x 410mm (above counter oval) [Through Rate]
89	[22.222.2.2]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete [Through Rate]
90	[22.222.2.4]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.4. Single Socket Type B 75mm o/d SWR UPVC pipe lines laid complete [Through Rate]
91	[22.34]Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. [Through Rate]
92	[22.38]Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. [Through Rate]
93	[22.42.1]Providing and fixing toilet paper holder : 1. C.P. brass [Through Rate]
94	[22.44]Providing and fixing 32 mm diameter Gl. extension pipe for Indian type Water Closet suite complete with accessories(as approved by the Engineer -in-charge) [Through Rate]
95	[22.45]Providing and fixing white vitreous chinaware water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. [Through Rate]
96	[22.5]Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. [Through Rate]
97	[22.50.1.2.3]Providing and fixing partitions for different type of urinals. 1.2.3. Vitreous Chinaware Partition plate. Large size 835mm x 355 mm Mixed Colour [Through Rate]
98	[22.53.1]Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 1. For 100 mm dia pipe [Through Rate]
99	[22.53.2]Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 2. For 75 mm dia pipe [Through Rate]
100	[22.85.4]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes [Through Rate]
101	[22.85.5]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 5. 40 mm nominal outer dia Pipes [Through Rate]
102	[22.86.2]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes [Through Rate]
103	[22.88.3]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 3. 25 mm dia nominal bore [Through Rate]
104	[22.88.4]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 4. 32 mm dia nominal bore [Through Rate]
105	[22.98.5]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 5. 50 mm nominal bore [Through Rate]
106	[23.20]Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required [Through Rate]
107	[23.21]Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required [Through Rate]
108	[23.22.1.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.4. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 125 to 160 Amp, 25 KA [Through Rate]
109	[23.22.4.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing) [Through Rate]
110	[23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) [Through Rate]
111	[23.22.4.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.9. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing) [Through Rate]
112	[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate]
113	[23.22.5.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.2. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Single Pole [Through Rate]
114	[23.22.5.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.4. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Double pole [Through Rate]
115	[23.22.5.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.6. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs TRIPLE POLE [Through Rate]
116	[23.22.6.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.5. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. FP RCCB 30ma sensitivity , 40 A [Through Rate]
117	[23.22.6.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.6. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. FP RCCB 30ma sensitivity , 63 A [Through Rate]
118	[23.23.10]MISCELLANEOUS 10. Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]
119	[23.23.6..2]MISCELLANEOUS 6..2. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 200 X 50 X 2 mm [Through Rate]
120	[23.23.6.4]MISCELLANEOUS 6.4. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 600 X 50 X 2 mm [Through Rate]
121	[23.23.8.1]MISCELLANEOUS 8.1. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 2 pair telephone wire [Through Rate]
122	[23.23.8.2]MISCELLANEOUS 8.2. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 4 pair telephone wire [Through Rate]
123	[23.4.1.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A [Through Rate]
124	[23.4.2.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 2.2. Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group B [Through Rate]
125	[23.4.3.3]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 3.3. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch Group C [Through Rate]
126	[23.4.4.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.1. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group A [Through Rate]
127	[23.4.5.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.1. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A [Through Rate]
128	[23.5.6.10]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.10. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 3 run of Size 2.50 Sqmm(1.1.80mm) [Through Rate]
129	[23.5.6.3]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) [Through Rate]
130	[23.5.6.9]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.9. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 3 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate]
131	[23.7.6.1]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.1. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 20 mm dia. [Through Rate]
132	[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]
133	[23.8.1.12]FITTING AND ACCESSORIES 1.12. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Bakelite angle/straight button holder large size. [Through Rate]
134	[23.8.1.14]FITTING AND ACCESSORIES 1.14. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. telephone socket [Through Rate]
135	[23.8.1.5]FITTING AND ACCESSORIES 1.5. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Ceiling rose flush/surface type [Through Rate]
136	[23.8.1.7]FITTING AND ACCESSORIES 1.7. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Electric buzzer 220/230 volts A.C. Bakelite with double coil. [Through Rate]
137	[23.8.10.1]FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data [Through Rate]
138	[23.8.10.2]FITTING AND ACCESSORIES 10.2. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules [Through Rate]
139	[23.8.10.3]FITTING AND ACCESSORIES 10.3. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 4 Modules [Through Rate]
140	[23.8.10.4]FITTING AND ACCESSORIES 10.4. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 Modules [Through Rate]
141	[23.8.10.5]FITTING AND ACCESSORIES 10.5. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 8 Modules [Through Rate]
142	[23.8.10.6]FITTING AND ACCESSORIES 10.6. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 12 Modules [Through Rate]
143	[23.8.11.10]FITTING AND ACCESSORIES 11.10. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Blanking plate [Through Rate]
144	[23.8.11.11]FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type [Through Rate]
145	[23.8.11.12]FITTING AND ACCESSORIES 11.12. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. USB Charger, 1000mA, 5V, 1 Module ( For Non residential use only) [Through Rate]
146	[23.8.11.7]FITTING AND ACCESSORIES 11.7. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt [Through Rate]
147	[23.8.11.8]FITTING AND ACCESSORIES 11.8. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Telephone Socket outlet modular type [Through Rate]
148	[23.8.11.9]FITTING AND ACCESSORIES 11.9. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. T.V. Socket outlet modular type [Through Rate]
149	[23.8.4]FITTING AND ACCESSORIES 4. Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. [Through Rate]
150	[23.9]Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work. [Through Rate]
151	[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]
152	[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate]
153	[24.1.14]EARTHING AND LIGHTENING ARRESTOR 14. Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size. [Through Rate]
154	[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]
155	[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]
156	[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]
157	[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]
158	[24.1.6]EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. [Through Rate]
159	[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]
160	[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate]
161	[24.2.6.1]LT CABLE 6.1. Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work 1.5 sqmm. [Through Rate]
162	[24.2.6.2]LT CABLE 6.2. Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 2.5 sqmm [Through Rate]
163	[24.2.6.3]LT CABLE 6.3. Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 4 sqmm [Through Rate]
164	[24.2.6.4]LT CABLE 6.4. Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 6 sqmm [Through Rate]
165	[24.2.6.5]LT CABLE 6.5. Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 10 sqmm [Through Rate]
166	[24.2.7.2]LT CABLE 7.2. Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core [Through Rate]
167	[24.2.7.3]LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core [Through Rate]
168	[24.2.7.5]LT CABLE 7.5. Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core [Through Rate]
169	[24.2.7.6]LT CABLE 7.6. Supply and erection of suitable compression type brass cable glands for underground Cable :- 240 sqmm to Cable 3 to 32 Core [Through Rate]
170	[24.2.8.11]LT CABLE 8.11. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 150 sqmm [Through Rate]
171	[24.2.8.13]LT CABLE 8.13. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 240 sqmm [Through Rate]
172	[24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate]
173	[24.2.8.3]LT CABLE 8.3. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm [Through Rate]
174	[24.2.8.4]LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm [Through Rate]
175	[24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm [Through Rate]
176	[24.2.8.6]LT CABLE 8.6. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm [Through Rate]
177	[24.2.8.7]LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm [Through Rate]
178	[24.3.3.1]HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]
179	[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]
180	[25.4.4]Supplying, fixing, testing and commissioning o NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end and PN 16 pressure rating as specified. 4. 100mm dia. [Through Rate]
181	[28.50]Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) ) 78, solar reflection ) 0.70 and initial emittance ) 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. [Through Rate]
182	[28.7]`Providing and applying waterproofing treatment using two component 100% solid content, hybrid polyurea/polyurethane, rapid curing and highly resilient fully bonded cured to membrane having a mixed density of 1.02g/l. Minimum recommended coverage rate is 1.5ltr/sqm in 2 coats to achieve a total DFT of 1.5mm. cured membrane shall exhibit: 1) Tensile strength ASTM D412 : )13 MPa 2)Tear Resistance ASTM D624C : 50 N/mm23) Shore A Hardness: 804)Elongation ASTM D412 : )450% 5( 1kg, CS 10 wheels,ASTM D 4060): 1.3 mg/1000 cycles 6) Service temperature: -20°C to plus 80°C 7) Resistant to Fire (EN13501-1)-Class E,d0 Manufacturers shall provide Certificate for Zero VOC, resistance to fire, 25 years life expectancy test certificate before the start of work. System includes supply , application and termination of coating all complete as per the manufacturer methodology.Clean the RCC slab/screed surface and wall for treatment by removing dust, dirt and layers of concrete over the surface. etc. by mechanical tools and wire brushing. Pressure grouting at construction joints or honeycombs with non shrink cementations grout by mixing shrinkage compensating admixture per bag of cement as per manufacturer’s recommendations. Prepare a side gola of 50X50 mm at the junction using polymer modified mortar. Providing and applying two component 100% solid content, hybrid polyurea/polyurethane membrane at coverage rate of 1.5ltr/sqm in 2 coats to achieve a total DFT of 1.5mm. It must be applied utilizing plural heated high-pressure spray proportioning machine/spray gun . Termination shall be done 300 mm above FFl by providing a groove cut of 30mm x 30mm and seal it with shrinkage compensated polymer modified mortar. Lay a 150 GSM geotextile layer to protect the coating from external damage on final coating before laying of screed concrete/final finish. It shall be applied as per manufactures specification. Rates are incl of surface preparation, grouting and chemical application only. (Rates for geotextile, protection plaster and final finishes such as screed or Brick bat filling for slope, china mosaic, tiles etc is not included in above item. It will be added as per EIC/clients requirements).` [Through Rate]
183	[29.7]Design supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets and Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener and anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion and seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter and in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof and dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, TandP, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. [Through Rate]
184	[32.43.1]Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 and7), humidity resistance of 100%, thermal conductivity ( 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 1. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles [Through Rate]
185	[34.2.1]Cast in Situ Cement Concrete M 20 Kerb with ChannelConstruction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 1. Using Concrete Mixer [Through Rate]
186	[4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate]
187	[4.16.1.2]Excavating trenches of required width and depth for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. 1.2. All kind of soil Pipes, cables etc, exceeding 80 mm dia but not exceeding 300 mm dia. [Through Rate]
188	[4.31.1]Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 1. All kinds of soil [Through Rate]
189	[4.32]Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. [Through Rate]
190	[6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate]
191	[6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) [Through Rate]
192	[6.1.7]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 7. 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) [Through Rate]
193	[6.10]Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. [Through Rate]
194	[6.13]Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth. [Through Rate]
195	[6.14.1]Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) [Through Rate]
196	[6.15.1]Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate]
197	[6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate]
198	[6.30.1]Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete [Through Rate]
199	[6.30.2]Centering and shuttering including strutting, propping etc. and removal of form for 2. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. [Through Rate]
200	[6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform [Through Rate]
201	[6.30.5]Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers [Through Rate]
202	[6.30.6]Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts [Through Rate]
203	[6.30.7]Centering and shuttering including strutting, propping etc. and removal of form for 7. Stairs, (excluding landings) except spiral-staircases [Through Rate]
204	[6.30.9]Centering and shuttering including strutting, propping etc. and removal of form for 9. Arches, domes, vaults up to 6 m span [Through Rate]
205	[6.33.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more [Through Rate]
206	[6.34.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. [Through Rate]
207	[6.8.2]Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 2. 40mm thick [Through Rate]
208	[7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) [Through Rate]
209	[7.21.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]
210	[7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]
211	[7.28.2]Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. 2. Cement mortar 1:4 (1 cement :4 coarse sand) [Through Rate]
212	[7.50]Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor IV level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work. [Through Rate]
213	[7.51]Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). [Through Rate]
214	[8.17]Providing and fixing manufactured jali of reinforced cement concrete consisting of cement , coarse sand and 10mm and down gauge bajri in ratio of 1:1:2 with 8mm dia tor steel. Outer frame of the jail will be 50mm wide and 25mm thick and inner frame of jali will be 25mm wide and 25mm thick with smooth finish as per design approved by the Engineer-in-Charge including fixing in position up to any height with cement sand mortar 1:4 complete in all respect. [Through Rate]
215	[8.26.2.2]Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.2. Granite of any colour and shade Area of slab over 0.50 sqm [Through Rate]
216	[8.27.2]Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 2. Granite work [Through Rate]
217	[8.28]Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. [Through Rate]
218	[8.8.1.2]Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 1.2. Granite of any colour and shade [Through Rate]
219	[9.18]Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. [Through Rate]
220	[9.46.3]Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer`s specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 3. 12.5 mm thick tapered edge gypsum moisture resistant board [Through Rate]
221	[9.57.3]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3. 150 mm diameter [Through Rate]
222	[9.58.5.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.3. Bend 87.5° 150 mm bend [Through Rate]
223	SITC of recess mounted round LED luminaire 15 watt, made of single piece PDC aluminium housing including flange having white powder coating with high efficiency PC/PMMA diffuser for homogeneous light distribution. Fixture should have minimum efficacy at System level (Not Chip Level) =110 lumens/watt and a minimum system lumen output of )1500 lumens. Luminaire should have 70% of luminous flux after 50,000 operating hours (L70), CCT 5700K, (SDCM(4), CRI )80, PF )0.95, THD(10%, IP20, UGR(19, IK =04, Operating working temp range - 0°C ( Ta ( 35°C and an operating Voltage Range of 140 - 270V. Internal Surge Protection =2.5KV. The fixture design should comply with EMC / EMI compliance with flicker free operations ripple (5%, comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI/EMC. Cut out of Ø160 mm. Fixture height should not less than 50mm. LT Cat No. DRM0S01557NDWEP MOON V2 STD DOWN LIGHT RECESS 15W
224	SITC of recess mounted LED luminaire (2X2) with 5700K,made of single piece PDC aluminium housing having powder coating with high efficiency PC diffuser with unique dropdown for homogeneous light distribution. Fixture should have minimum efficacy at System level (Not Chip Level) =100 lumens/watt and a minimum system lumen output of )3600 lumens. Luminaire should have 70% of luminous flux after 50,000 operating hours (L70), CCT of 5700/6500K (SDCM(4), CRI )80, PF )0.95, THD(10%, R9)20, IP20, UGR(19, IK =05, Operating working temp range - 0°C ( Ta ( 35°C and an operating Voltage Range of 140 - 270V. Internal Surge Protection 2.5KV. The fixture design should comply with EMC / EMI compliance with flicker free operations ripple (5%, comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI/EMC. Cut out of 575mm x 575mm. LT Cat No. PRS0003657NDWEP Sparkle PANEL LIGHTS RECESS 28W 5700K
225	Supply of XLPE/PVC Insulated Al conductor Ar. Cables in existing pipe, cable trays or on surface4CX16 sqmm
226	Supply of XLPE/PVC Insulated Al conductor Ar. Cables in existing pipe, cable trays or on surface3.5CX25sqmm
227	Supply of XLPE/PVC Insulated Al conductor Ar. Cables in existing pipe, cable trays or on surface3.5CX35 sqmm
228	Supply of XLPE/PVC Insulated Al conductor Ar. Cables in existing pipe, cable trays or on surface3.5CX50 sqmm
229	Supply of XLPE/PVC Insulated Al conductor Ar. Cables in existing pipe, cable trays or on surface3.5CX150 sqmm
230	Supply of XLPE/PVC Insulated Al conductor Ar. Cables in existing pipe, cable trays or on surface3.5CX240 sqmm
231	Supply of XLPE/PVC Insulated Al conductor Ar. Cables in existing pipe, cable trays or on surface3.5CX300 sqmm
232	SETC OF 11 KV H.T. VCB SINGLE BREAKER PANEL BOARD (INDOOR TYPE) TO ATTACHED THE EXISTING BUS BAR AS PER THE TECHNCIAL SPECIFICATIONS ATTACHED 630A, 11kV, 350MVA for 3 Sec., TP, Horizontally isolated, horizontally drawout type, motorised spring charged, closing mechanism, motor voltage 230V AC, shunt tripping and Closing coil Voltage 24V DC, Electrically Operated, Trip Free, Dust and Vermin Proof, Vacuum Circuit Breaker(VCB) With Mechanical and Electrical OFF/ON Indicators and Provided with Following - 1 No. complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work._ -_ -_ As per specifications
233	SITC OF 20 KVA UPS SYSTEM AS PER THE TECHNCICAL Supply of SMF Batteries (12Volt VRLA, 42 Ah, 32 Numbers to provide 20 Min Backup in total for 20 kva UPS at 0.8PF and ECV=1.7V.Supply of SMF Batteries (12Volt VRLA, 42 Ah, 32 Numbers to provide 20 Min Backup in total for 20 kva UPS at 0.8PF and ECV=1.7V.Supply of Local Accessories (like Cabling Between UPS and the Battery onsidering Cable Routing ,Battery Interlinks ,Battery Rack etc) Backfeed protection at Mains and Bypass(Inbuilt / External) Backfeed protection at Mains and Bypass(Inbuilt / External) Backfeed protection at Mains and Bypass(Inbuilt / External)._ -_ -_ As per specifications
234	MAIN LT PANEL Suppy , installation, testing, Design, manufacture, supply inspection , handling, assembling, affecting proper connections, testing and commissioning of 2mm CRCA sheet steel fabricated cubical type Main L.T. Panel (Totally Type Test Assembled-TTA) floor mounting, dust and vermin proof, front operated construction, enclosure class - IP 52, As per IEC 61439 after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required. Panel Should Be Internal Arc tested at 50ka for .3 sec as per IEC61641 complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work._ -_ -_ As per specifications
235	AUTOMATIC POWER FACTOR CORRECTION PANEL (CAPACITOR PANEL) - 450 KVAR Supplying, Installation, Testing and Commissioning of cubicle type capacitior panel suitable for 415 and 3 phase 50 HZ A.C. supply System fabricated in compartmentalised design from CRCA Sheet Steel of 2 mm thick for frame work and cover, 3 mm thick for gland plates i/c powder coating in approve shade having 800 AMP capacity TPN Aluminium bus bar DMC/SMC bus bar supprot entire pannel should have common Al. earth bar for size 50 mm x 5 mm i/c Providing and fixing following switch gear mounting there on fans,grills for propor ventillation complete with gaskets and inner connection i/c connection with existing CTS in the main CT Panel complete as reqd.The panel board shall be of dust and verm proof with degree of protection IP 42) complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work._ -_ -_ As per specifications
236	MAIN PANEL FOR AUDI AND CONFERENCE HALL Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, Floor mounting type. The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. complete the job in all respect up to the entiresatisfaction of the Engineer-in-charge of the work._ -_ -_ As per specifications
237	FLOOR PANEL Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, Floor mounting type. The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
238	TYPICAL FLOOR PANEL LIGHT AND POWER Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, Floor mounting type. The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
239	LIFT PANEL MAIN Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, Floor mounting type. The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
240	EXTERNAL LIGHT FEEDER PILLAR 1 Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
241	FIRE FIGHTING PANEL Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, Floor mounting type. The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
242	Flooring:- Granite FlooringLightning :- Diffused Lighting in carIndicators:- Digital Direction and Position Indicators in both car and at all landingsAutomatic Rescue Device:- Automatic Rescue Device to automatically bring the elevator to a landing in case of power failure Other Features:- Battery Operated Emergency Light with Rechargeable Battery Battery Operated Emergency Alarm with Rechargeable BatteryAdjustable Guide ShoesMicro Movement L.E.D. based Buttons System Capable of withstanding plus 10% to –10% Variation in Supply Voltage Fluctuations Load Weighing Device with Overload By - pass Feature Hands Free Press and Speak Intercom. Steel items such as Machine Beams, Door Frames Sill Angles, Fascia Plates, Spring Buffers. Full Height Infrared Safety Curtain with required Intersecting Beams Car Platform constructed out of Cold Rolled Grain Oriented Formed Sheets of Steel Fire Man Switch at Main Lobby Car False Ceiling in Stainless Steel in Plain Finish. Pit Ladder Motor Tested for 180 starts per hour. All Signal Fixtures shall be in Stainless Steel Face Plates in Plain Finish
243	Supplying and Fixing of Energy saving double side EXIT sign board (size 12` x 6` x 4`) fabricated in 18 swg CRC sheet with LED and acrylic sheet both side display, well ventilated, having nominal size LED lamp, battery backup 6 hour to be installed on wall/ceiling etc. complete as required. (MAKE: BAJAJ/FGL/LEGRAND/ABB)
244	Providing and Fixing Digital Control Electrical panel Panel suitable for Three phase Fire Fighting Pump set of 900 LPM complete as per requirement with fuses, Ammeter, Selector switch for local/remote, auto / manual / off operation ON/OFF indication lamp etc., Suitable HP fully automatic Star / Delta starter with over load protection, current sencing type single phase preventor complete with all accessories and internal wiring required for automatic operation.
245	Providing and fixing FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufacturer`s specification ISI Mark in all respect.4.5 KG. Capacity
246	Providing and fixing of FIRE EXTINGUISHER, ABC TYPE 4.5 Ltr IS: 15683 Stored Pressure type complete with all accessories as per Manufactures Specification. ISI Mark of approved make complete in all respect.
247	Providing and fixing of FIRE EXTINGUISHER, Mechanical Foam Type 9 ltr IS: 15683 Stored Pressure type complete with all accessories as per Manufactures Specification. ISI Mark of approved make complete in all respect.
248	SITC of 1/3-inch, CCD sensor color IP indoor UL / FCC listed dome camera with Progressive scan 4CIF resolution, Vari Focal lens 3.8 mm to 12 mm F1.2 auto iris , sensitivity 0.012 lux @ 30 IRE (Night Sense), Quad-stream video simultaneously — two H.264 streams, an I-frame recording stream and an M-JPEG stream, Removable MicroSD card for built in recording, POE enables, two way audio and audio alarm, ONVIF Compliant, Tamper and Motion Detection, operating temperature -20 to plus 50 deg cel., complete with Dome Housing IP 66 and NEMA-4X, Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment and all accessories as per technical specification and should be UL listed.
249	SITC of 1/3-inch, CCD sensor color IP indoor UL / FCC listed BOX camera with Progressive scan 4CIF resolution, Vari Focal lens 5 mm to 50 mm F1.2 auto iris , sensitivity 0.012 lux @ 30 IRE (Night Sense), Camera should fully Support iscsi recording, Quad-stream video simultaneously — two H.264 streams, an I-frame recording stream and an M-JPEG stream, Removable MicroSD card for built in recording, POE enables, two way audio and audio alarm, ONVIF Compliant, Tamper and Motion Detection, operating temperature -20 to plus 50 deg cel., complete with Dome Housing IP 66 and NEMA-4X, Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment and all accessories as per technical specification and should be UL /FCC listed.
250	SITC of 1/3-inch, CCD sensor color IP outdoor UL / FCC listed BOX camera with Progressive scan 4CIF resolution, Vari Focal lens 5 mm to 50 mm F1.2 auto iris , sensitivity 0.012 lux @ 30 IRE (Night Sense), Camera should fully Support iscsi recording, Quad-stream video simultaneously — two H.264 streams, an I-frame recording stream and an M-JPEG stream, Removable MicroSD card for built in recording, POE enables, two way audio and audio alarm, ONVIF Compliant, Tamper and Motion Detection, operating temperature -20 to plus 50 deg cel., complete with Dome Housing IP 66 and NEMA-4X, Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment and all accessories as per technical specification and should be UL /FCC listed.
251	SITC of Managed Layer -2 Switch with Power on Ethernet (PoE) enabled, with 24 nos. 10/100 base Tx PoE port, 1 no. dual personality Gbe Port for copper/fiber uplink, 3.7 Gbps switching capacity, 2.7 MPPS forwarding rate, maximum power consumption 135 watt.
252	SITC of Minimum server hardware requirements:a. Intel® Xeon® X5670, 2.93GHz, 12M Cache, Turbo, HT, 1333MHzb. 8TB memory, 1333MHz dual ranked Registered DIMMs (RDIMMs), advanced ECCc. Microsoft Windows Server® 2003 Server R2, Standard Edition (32-bit) or higherd. 146GB 10K RPM Serial-Attach SCSI 6Gbp or higher e. DVD plus /-RW, SATA, Internalf. Dual Integrated 100/1000 Ethernet NICg. I/O Expansion Optionh. Keyboard and Optical Mousei. Monitor 20 inch flat LCD panel
253	SITC of 12 U Mounting Rack with ventilation, sliding shelves, power strips, etc. all complete.
254	Supply, Installation, Testing, Commissioning of Cat 6A flush mounted Enhanced Category 6A Outlet Information. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover / blank shall be provided to protect unused faceplate openings. Termination caps and plastic cover shall be provided to protect jack wiring.
255	Supply , Installation, testing , commissioning of 24 Port Category 6A, IDC patch panel prepackaged with wiring block with legs with legs insert labels, label holders, jumper troughs, metal back panel, duct assembly, screws, washers and an instruction sheet for termination of incoming pairs.
256	Supply and installation of wire manager suitable for mounted on 19 inch rack.
257	Supply , Installation, testing , commissioning of CAT6A UTP patch cords shall be constructed of 24-27 AWG twisted pair stranded copper cable with an enhanced performance modular plug at each end. Patch cord cable shall be offered in multiple colored UTP cable for design flexibility with a clear strain relief boot on each modular plug. All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP Cable will be 2.0 mtr.
258	Supply , Installation, testing , commissioning of CAT6 UTP patch cords shall be constructed of 24-27 AWG twisted pair stranded copper cable with an enhanced performance modular plug at each end. Patch cord cable shall be offered in multiple colored UTP cable for design flexibility with a clear strain relief boot on each modular plug. All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP Cable will be 1.0 mtr
259	Supply, Installation, Testing, Commissioning of Single Faceplate Shall be Duplex Port (RJ45) square plate, dimension as per commercially available modular office furniture.Shall have spring shuttered front access for preventing ingress of dust,Shall be supplied same size by System Integrator.
260	Supply, Installation, Testing and commissioning of Layer 2 24 Port Manageable 10/100/1000 BaseT, SFP Combo 10G, uplink ports. 1RU size, internal AC power supply. Includes a country specific power cord, guides, and 19` rack mount hardware.
261	Supply, Installation, Testing and Commissioning of SFP plus 10GBASE-SR 10 Gigabit Ethernet Optics, 850 nm for up to 300 m,transmission onmultimode fiber (MMF).
262	Supply, Installation, Testing and commissioning of Layer 3 24 Port Manageable 10/100/1000 BaseTx Port PoE plus , SFP Combo 1G, uplink ports. 1RU size, internal AC power supply. Includes a country specificpower cord, guides, and 19` rack mount hardware.
263	Supply, Installtion, Testing and comissioning of Fiber Optic LC style fully loaded Patch Panel (FOPP), 19` Rack Mount ,Shall have all accessories including coupler plates pre loaded with 12 Nos of LC couplers (OM3) with all accessories complete insestive fiber.
264	Supply, Installation, Testing and Commissioning of Fiber Optic Patch Cable (LC-LC), 3 Mtrs. Long, ISO/IEC- 11801-OM3 50µ Duplex, LSZH,All patch cords shall conform to EIA/TIA-568C.3 and ISO/IEC-11801, Shall be Duplex Multi Mode Fiber Optic Patch Cords OM3 50µ,Shall support network line speeds up to 10 Gbps.Shall have LC-LC Connector connectors at the ends complete in all respect.
265	Supplying and Fixing of Floor Standing Network Rack - 18U / 600w / 600d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top and Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 800d Front MS Door perforated honeycomb 600w Rear MS Door (Fully Perforated - Mesh) 600w Fan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets 5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 18U complete in all respect.
266	Supplying and Fixing of Floor Standing Network Rack - 42U / 600w / 800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top and Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 800d Front MS Door perforated honeycomb 22U/600w Rear MS Door (Fully Perforated - Mesh) 600w Fan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets 5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 42U complete in all respect.
267	Supplying, installation, testing and commissioning of Indoor 2 Dual-Band PoE Access Point should be Features High-Performance Connectivity: IEEE 802.11ac Wave 2 wireless1: Up to 1750 Mbps1 speed: MU-MIMO with beamforming: Band steering Gigabit PoE-capable LAN port Multiple Operation Modes Access Point, Wireless Distribution System (WDS), WDS with AP, Wireless Client Extensive Management: Connect support for centralised and additional configuration options Web, SSL, SSH and Telnet management SNMP v1, v2c, v3 Trusted Security Features WPA/WPA2 Personal/Enterprise 64/128-bit WEP MAC filter and WLAN partitioning Local/POP3 / RADIUS / PassCode/LDAP authentication for captive portal Convenient Installation: Device Interfaces - IEEE 802.11a/b/g/n/ac Wave 2 wireless1 interface: 1 x Gigabit PoE-capable LAN port: Antennas - 3 x internal dual-band antennas: 3.6 dBi at 2.4 GHz,4.2 dBi at 5 GHz: Power Supply - External power adapter: 12 V/2 A (not included): IEEE 802.3at PoE: Certifications - FCC, CE 4, UL.
268	Supplying Installation, Testing and Commissioning of IP Based EPABX Fully Computerized, Multi slot 19: U Rack Mountable 2U Rack Presently Configuration as Below:04 Digital Extension 01 PRI 04 Analog Trunk Extension - UP TO 100
269	Supply Installation, Testing and Commissioning of Operator Console
270	Supply Installation, Testing and Commissioning of IP Phone
271	Supply,Installation, Testing and Commissioning of Chairman Unit, Voice-activated microphone mode,RFI protection on the gooseneck microphone stem, Waterproof and dustproof design.,Red ring illuminant to identify active unit, Blue LED indicator for chairman or VIP,Mounting type: flush mounting, Frequency response: 50Hz-18KHz, Sensitivity: -46dB±4dB , S/N ratio: -95dB, THD: ( 0.3%, Power input: 24V, VOX sensitivity: H/M/L (76dB/80dB/82dB), VOX auto mic time-out: 20-250 seconds, Mic pickup range: 100-600mm, Mic stem length: 410mm standard. Make: Gonsin, Sennheiser, Beyerdynamic
272	Supply, Installation, Testing and Commissioning of Delegate Unit Voice-activated microphone RFI protection,, Pluggable gooseneck microphone stem. Waterproof and dustproof, microphone pick-up range 12 to 18``, Red ring illuminant to identify active unit, Blue LED indicator for chairman Attendance: registration ., VOX sensitivity and mic time-out are adjustable., Automatic video tracking, with preset position., Mounting type: flush mounting , Frequency response: 50Hz-18KHz,, Sensitivity: -46dB±4dB, S/N ratio: -95dB, THD: (0.3%, Power input: 24V, VOX sensitivity: H/M/L (76dB/80dB/82dB), VOX auto mic time-out: 20-250 seconds, Mic pickup range: 100-600mm, Mic stem length: 410mm standard,Make: Gonsin, Sennheiser, Beyerdynamic
273	Supply, Installation, Testing and Commissioning of Central Control Unit, Microphone should be activated simultaneously on 1 to 4 delegate units, Selectable microphone mode: VOX/AUTO/FIFO/OPERATOR,Volume level should be adjustable for single, ID number for each unit using LCD on front panel, Automatic video tracking with preset position. Built-in DSP to prevent feedback, Built-in treble/bass compensation for better sound quality, Centralized conference management, Speaking time limit can be preset for delegates. Voting, Conference audio recording and video recording, Power supply for 60 conference units, Connection of conference units with 4 lines, Active delegate microphone limit:1/2/3/4, PC communication: RS232, Ethernet, Video camera communication: RS485, Video camera supported: up to 4 cameras,Video tracking protocol: Pelco-P9600 / Sony-VISCA, AV matrix switcher output : RCA x 2(1Vp-p, 75O), MIC IN: 6.5mm jack, 0.775V, REC OUT audio output: 0-2.8V Vpp, S/N ratio: -95dB, THD: ( 0.3% , Power supply: 220V/50Hz or 110V/60Hz, ±10%Make : Gonsin, Bosch, Beyerdynamic
274	Supply, Installation, Testing and Commissioning of HD Ceiling Tracking Camera Image Inductor:1/4? SONY Ex view HAD CCDPixels:752 H×582 V(440000 pixels )PALIn-phase System, Video Output:1.0 Vp-p/75OWhite Balance: Auto / ManualPower Supply: AC 24V±10% 1.25A (with fan/heater)Installation: Indoor ceiling installation or wall mounting.Scan System:15.625 KHz (H) 50Hz (V)Horizontal”480 Horizontal, Signal-to-Noise:) 48 dbShutter:1/3-1/10000 sec, Sensitivity:0.01-1 lux (F1.6)Lens : Zoom Rate:22×Optical and 10×Digitalris: Auto / Manual, Focus: Auto / ManualDome : Pan Speed:0 - 300°/s, Tilt Speed:0 - 120°/sPreset :128 presets (max)Make: Gonsin, Lumens, Beyerdynamic
275	Supply, Installation, Testing and Commissioning of Ceiling Tracking Camera Control Keyboard SoftwareDirect control of all functions including speed in the dome camera. Pan/tilt of speed dome camera. Min 100 preset positions and 6 tracks with recall function. Each track should contain a min of 10 preset positions facility to control the dome camera speed both manually/auto. Facility to change the initial setting through the speed on the dome camera menu. Make: Gonsin, Lumens, Beyerdynamic
276	Supply, Installation, Testing and Commissioning of NetLinx Integrated Controller Ultra-Fast 1600 MIPS processor, 512 MB Onboard RAM, 1 M Non-Volatile Memory, 8 GB SDHC FLASH Memory, 1 AXLink Interface: 1 10/100 LAN Interface: 4 Digital I/O Ports: 1 RS232/422/485 Port: 3 RS232-Only Ports: 4 IR/Serial Output Ports: 4 Relay Ports Internet Protocol version 6 (IPv6), IEEE Standard for Port-based Network Access Control, multiple user-defined login groups for accessing the master, High Performance Architecture, Flexible Programming Platform (RPM, NetLinx and Java) – Easily scalable to support a wide range of applications, Full Line Compatible (Backwards and Cross-Compatibility),Make :AMX,Crestron, Extron
277	Supply, Installation, Testing and Commissioning of 8x8 4K60 HDMI Matrix Switcher, 4K60 4:4:4 Support, V High Dynamic Range (HDR) Support, HDMI 2.0 and HDCP 2.2, Mirrored HDBaseT Outputs, Fixed configuration, Audio De-embed capabilities, Audio Inputs: Embedded audio on HDMI: supports 2 CH L-PCM de-embedding and pass-through of PCM 2-Channel, PCM Multi-Channel, Dolby Digital, Dolby Digital Plus, Dolby Atmos, Dolby TrueHD, DTS, and DTS HD MA Video Resolution Support: Various up to 4096 x 2160@ 60 Hz - Reference Data Sheet for Specific Resolution Support Make: AMX, Crestron, Extron
278	Supply, Installation, Testing and Commissioning of 10` Touch Panel with software : 10” Modero G5 Tabletop Touch Panel Touch Overlay CapacitiveMake: AMX, Crestron, Extron
279	Supply, installation, Testing and Commissioning of Power Supply for Touch PanelInput Voltage : 100-240 plus 10% VACInput Frequency : 47-63 HzInput Current : (2A MAX at 100 VAC plus full load, (1A MAX at 230 VAC plus full loadOutput Voltage : 12 VDCOutput Current : 5.4A MAXRipple and Noise : 200 mV peak-to-peak @ full loadProtection : Over-voltage, over-current, short-circuit, transient and thermal. Switching regulated, overload protectedMake: AMX, Crestron, Extron
280	Supply, Installation, Testing and Commissioning of Acendo Core Wireless Presenter SystemInputs: 1 x 1/8` / 3.5 mm stereo mini jack Outputs: 1 x 1/8` / 3.5 mm stereo mini jack USB: 4 x USB 3.1 Gen 1 Type-A, 2 x USB 2.0 Type-A Resolution: For the HDMI Input: 1080p@60Hz, Processor:-4th generation Intel® Dual core 1.4GHz,MAIN MEMORY - 4GB, high speed, STORAGE - 32GB, solid–state drive, LAN - Gigabit LANAUDIO - Analog or embedded HDMI, S/PDIF Realtek ALC269, POWER SUPPLY - 65W power adapter (19V, 3.4A), INPUT VOLTAGE - 100V~220V AC, 50/60Hz, auto sensingMake :AMX, Crestron, Extron
281	Supply, Installation, Testing and Commissionin of Cable CubbyConnection Ports: Power Outlet (IN) Module, Dual USB Module with Printed Charging Symbol 1 Single HDMI Module with Integrated Cable 1, 1/2 , RJ45 Single Ethernet Module Make: AMX, Extron, Kramer
282	Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz): Memory: 4GB, NON-ECC, 1600MHZ: RAM: 4GB (1x4GB) Non-ECC DDR3 1600MHz SDRAM Memory: Keyboard: 12 function keys: Chassis: Tower/Workstation: DVD: 8X Slimline DVD plus /- RW, Data Only: 20` TFT Monitor: Dual Graphics Card: Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000: Hard disk: 250GB, 7200 RPM 3.5` SATA 6Gb/s Hard Drive: Operating system: Windows 7 Professional 64 BitMake : HP, Dell, Acer
283	Supply, Installation, Testing and Commissioning of Constant Beam width Technology, Line Array Column Loudspeaker with Line Array Column Loudspeaker with Eight 50mm (2in) Drivers with clamps Frequency Range (-10 dB): 80 Hz- 20 kHz, Nominal Impedance: 8 Ohm, Sensitivity: 89 dB, Power Capacity: 100 W (400W peak), 100 hrs, Max SPL: Music mode: 111 dB cont ave (117 peak), Fiberglass reinforced ABS cabinet, painted aluminum grille Make : Harman, L-Acoustics, DandB
284	Supply, Installation, Testing and Commissiong of Power Supply AmplifierOutput Power: 2 x 775 watts @ 2 Ohms, 2 x 500 watts @ 4 Ohms, 2 x 300 watts @ 8 Ohms,Bridged: 1000 Watts @ 8 Ohm, Crosstalk: )85 dB (below rated 8 ohms power, at 1 kHz): )55 dB (below rated 8 ohms power, at 20 kHz), Damping Factor: )200 Signal to Noise Ratio: ) 103 dB Sensitivity: 1.4V, Voltage Gain: 35Make : Harman, Powersoft, Labgruppen
285	Supply, Installation, Testing and Commissioning of Digital Sound Management Controller 8 in 12 out Maximum input level: plus 20 dbu Input Impedance: 3.5kO Phantom Power: 48V nominalMaximum Output Level: plus 19dBu Frequency Response: 20Hz-20KHzTHD: (0.01% 20Hz to 20KHz, plus 10dBu output Output Impedance: 40O balanced and 20O unbalanced, Mains Voltage: 100-240V AC, 50/60Hz Power Consumption: (55VA BTU Rating: (188 BTU/hr Operating Temp. Range: 5 (41) to 35 (95) degrees C (degrees F), Dynamic Range: 108dB typical, 22Hz-22KHz unweighted Features : Each input/ output should be configurable individually having a cross over, limiter, parametric eq and a delay, It should also have an individual gain control of all outputs Make : Harman, L-Acoustics, DandB
286	Supply, Installation, Testing and Commissioning of 12 Channel Mixer, Type:Analog, Inputs - Mic Preamps:8 x XLR, Phantom Power:12, Aux Sends:3 x Pre/Post, Busses/Groups: 2 x Bus (Aux), 1 x Bus (Aux/FX), 2 x Subgroups (Mono), 1 x Subgroup (Stereo), High-Performance 12-input small format analogue mixer with onboard effects and multi-track USB recording and playback 14-in/12-out ultra-low latency USB playback and recording interface Make: Soundcraft, Middas, Allen and Heath
287	upply, Installation, Testing and Commissioning of Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band , Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz ,THD at 1 kHz: (0.3% (Receiver) , Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation ,Up to 48 Simultaneous channels , Upto 14 hours operation with one single AA battery or better, Pilot Tone transmission to know the transmitter battery status, Receiver should have microphone level and line level output , Transmitter should have display to show the battery and LED to show the Muted /Unmuted status, Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D. 0.7 % (Transmitter), Infrared programmable ,RF output power: 10 or 50 mW. Make : AKG , Shure, Sennheiser
288	Supply, Installation, Testing and Commissioning of Wireless Lavalier Microphone SystemWireless Microphone system with MHZ carrier frequency band , Up to 16 pre-programmed frequencies within the same frequency band ,Audio bandwidth 35 - 20,000 Hz ,THD at 1 kHz: (0.3% (Receiver) ,Signal-to-noise: 120 dB(A) ( Receiver) ,Wideband FM Modulation ,Up to 48 Simultaneous channels ,Upto 14 hours operation with one single AA battery or better, Pilot Tone transmission to know the transmitter battery status ,Receiver should have microphone level and line level output ,Transmitter should have display to show the battery and LED to show the Muted /Unmuted status ,Sensitivity 6.3 dB V / -100 dBm ,Should have Microprocessor-controlled diversity ,T.H.D. 0.7 % (Transmitter) ,Infrared programmable, RF output power: 10 or 50 mW. Make : AKG , Shure, Sennheiser
289	Supply, Installation, Testing and Commissioning of Podium Condenser Microphone, Audio frequency bandwidth: 50 - 19000 Hz, Equivalent noise level: 21 dB-A, Sensitivity:12 mV/Pa, Signal to Noise:73 dB-A, Electrical impedance: 600 Ohm, Recommended load impedance2000 OhmsMake : AKG , Shure, Sennheiser`
290	Supply, Installation, Testing and Commissioning of 86`` Interactive Touch Panel 86``, 4K Multi touch interactive display, Up to 10 point touch in PC mode, HDMI X 4, VGA X1, USB2.0 X 4, Touch USB X 1, Anti Glared (AG), 4mm Tempered Glass, USB-Autoplay, Auto-switch onFailover, Control button lock, HDMI Wake-UpMake: Panasonic, Samsung, Brio`
291	Supply, Installation, Testing and Commissioning of 4K HDMI Cable 3 feet Make : Kramer, Extron, Crestron`
292	Supply, Installation, Testing and Commissioning of Extension Cable 10 MtrMake: Gonsin, Sennheiser, Beyerdynamic
293	Supply, Installation, Testing and Commissioning of Connection T Type CableMake: Gonsin, Sennheiser, Beyerdynamic
294	Supply, Installation, Testing and Commissioning of DMX signal Wire 2 core 23/0.2 ATC conductor PVC insulated, over all shielded with copper screening and PVC sheathing Make :Chetan, Krystal, Belden`
295	Supply, Installation, Testing and Commissioning of Speaker cable Stranded 2 X 2.5 sq mm, PVC insulated and soft PVC sheathed copper low loss, low conductance. Make :Chetan, Krystal, Belden`
296	Supply, Installation, Testing and Commissioning of Lighting Connecting Points 2x2.5 sq.mm, FRLS PVC insulated copper conductor single core cable with required hardware Make : Wire - Havells/Echo `
297	Supply, Installation, Testing and Commissioning of Speakon connectors, XLR male/ female, RJ45 RCA connectors, patch cables Make : Neutrik, Amphenol`
298	Supply, Installation, Testing and Commissioning of PVC conduits, PVC cable tray except distribution box and electrical points for Laptop connectivity on cable cubby, RJ 45, XLR male/ female Connectors etc `
299	Supply, Installation, Testing and Commissioning of Equipment Rack22U, 23” Deep Floor Standing factory made Rack with Glass Front Door and Steel Back Door, The rack should be open able on all 4 sides with a 18 swg doors adequately stiffened and powder coated cabinet. ID Length : 19”, ID Height : 44”, OD Length : 24”, OD Width : 24” Material : 18 gauge steel,Color : Gray, Hinges : MetalWheels : Optional Casters, (2) lockingSecurity Options : Key lockMake : Comrack, Inforack, President`
300	`N.S. ItemSupply, Installation, Testing and Commissioning of 4K HDMI Cable 35 feet Make : Kramer, Extron, Crestron`
301	Supply, Installation, Testing and Commissioning of 4K HDMI Cable 50 feet Make : Kramer, Extron, Crestron
302	Supply, Installation, Testing and Commissioning of 4K HDMI Cable 66 feet Make : Kramer, Extron, Crestron
303	Supply, Installation, Testing and Commissioning of LED Display Panel 55`` 55` 4K UHD(3840 X 2160) LED display, 500 Cd/m2, HDMI 2.0 X 4, DP X 1, VGA X 1, USB X 2, RJ45X 1, RS232 X 1, Audio IN X1, Audio Out x 1, Digital Audio Out x 1, HDMI Out x 1, 20W in builtspeaker, 24/7 operation, Built in Wifi, Bluetooth, Auto wake up on Input, Auto switch on failover,HDMI CEC, No signal Power Off, SNMP Support, Crestron Connected, RS232 and LAN Control, USBAuto play function, Multi screen support upto 10 x 10, HTML 5.0 based browser, SOCMake: Panasonic, Samsung, Brio
304	Supplying, installation, testing and commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.
305	Supplying, installation, testing and commissioning of addressable manual call point complete as required.
306	Supplying, installation, testing and commissioning of addressable horn cum strobe complete as required.
307	Supplying, installation, testing and commissioning of addressable strobe complete as required
308	Supplying, installation, testing and commissioning of fire fighter telephone handset complete as required
309	Supplying, installation, testing and commissioning of fire fighter phone jack complete as required
310	a) Supplying, installation, testing andcommissioning of Electric driven Main Fire Pumpconforming to IS 12469: 2019 suitable for automaticoperation and consisting of following, complete in allrespects, as required :(b) Horizontal type, multistage, centrifugal, splitcasing pump of cast iron body and bronze impellerwith stainless steel shaft, mechanical seal asrequired.(c) Suitable HP Squirrel cage induction motor,TEFC, synchronous speed 1500 RPM, suitable foroperation on 415 volts, 3 phase 50 Hz, AC supplywith IP 55 protection for enclosure, horizontal footmounted type with Class-`F` insulation, conforming toIS-12615: 2018.(d) M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required.(e)Suitable cement concrete foundation dulyplastered with anti vibration pads.27.1.2 2850 lpm at 70 m Head
311	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia
312	Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/ Stainless Steel cap and chain as required : [DSR-Wet Riser and Sprinkler : 9] Single headed Gunmetal
313	Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/ Stainless Steel cap and chain as required : [DSR-Wet Riser and Sprinkler : 9] Single headed Gunmetal `
314	Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :150 mm dia `
315	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 32 mm dia
316	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 40mm dia
317	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50mm dia
318	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 65mm dia
319	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80mm dia
320	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100mm dia
321	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150mm dia
322	Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. `
323	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 200mm dia
324	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 250mm dia
325	Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 300mm dia
326	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia
327	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :100mm dia
328	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :200mm dia
329	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required 100mm dia
330	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required 150mm dia
331	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required 200mm dia
332	Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 0Cwith required accessories Upright Sprinkler
333	Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 200mm dia
334	Supplying and laying of 2x1.5 sqmm fire survival armouredcable, 600/1000V rated with annealed copper conductorhaving glass mica fire barrier tape covered by an extrudedlayer of Cross Linkable Ethylene Propylene Rubber (EPR)insulation and LSZH inner bedding, steel wire armouring andLSZH outer sheath complete as required.
335	Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.speaker cable Single pair, 2-core, 1.5 sqmm
336	Supplying, fitting and fixing Sound Soak NSS Cord (FSS Cord) wrapped accoustical wall panel system of AAL including all fixtures and fittings. Make Armstrong or equivelent
337	Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cmx16cmx3mm thick G.I. base plate and necessary nuts and bolts with washers.
338	HVAC PANEL Distribution Panel - Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, Floor mounting type. The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
339	HVAC PANEL Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, Floor mounting type. The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
340	Supply and erection of Main control TTA panel consisting of 1000 A four pole ACB 50 KA as incomer and 2 No. 400 kvacapacity 36 KA MP type MCCB, 8 nos 125 A TMD MCCBs complete with required metering and Al bus Bar complete in all respects as per SLD.
341	. Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required 80mm dia
342	Supply and erection of 150 KVAR APFC Hybrid panel consisting of 250 A three pole MCCB25 KA as incomer and with 8 step APFC realay complete with required capaccitor banks and metering and Al bus Bar complete in all respects as per SLD.
343	Supply and erection of Emergency supply control panel consisting of 250 A four pole MCCB 36 KA as incomer and 6 No. 125 kvacapacity 25 KA TMD type MCCB, complete with required metering and Al bus Bar complete in all respects as per SLD.
344	. Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required 80mm dia
345	Providing and fixing of FIRE EXTINGUISHER, WATER CO2 9 Ltr IS: 15683 Stored Pressure type complete with all accessories as per Manufactures Specification. ISI Mark of approved make complete in all respect.
346	Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve and nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket.30 m
347	Supply, Installation, Testing and commissioning of Layer 2 16 Port PoE Manageable 10/100/1000 BaseT, SFP Combo 10G, uplink ports. 1RU size, internal AC power supply. Includes a country specific power cord, guides, and 19` rack mount hardware.
348	Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal `
349	Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way-150 mm dia M.S. Pipe`
350	Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. `
351	Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steelcomplete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressureof 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mmNPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizescomplete as required.1500 mm
352	Supplying, installation, testing and commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
353	Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 0Cwith required accessories Pendent Sprinkle`
354	Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger.The panel shall have facility to connect printer to printout logand facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as perspecifications : Two loop panel
355	Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required. `
356	Supplying, installation, testing and commissioning of intelligent addressable programmable sounder complete as required.
357	Supplying, installation, testing and commissioning of intelligent\ addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required
358	Supplying, installation, testing and commissioning of addressable fire control module complete as required.
359	Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required. 150 mm dia `
360	Supplying, installation, testing and commissioning of addressable phone control module complete as required
361	commissioning of electric driven pressurisationpump conforming to IS 12469: 2019 suitable forautomatic operation and consisting of following,complete in all respects, as required : (JockeyPump)(b) Horizontal type, multistage, centrifugal pump ofcast iron body and bronze impeller with stainlesssteel shaft, mechanical seal as required.(c) Suitable HP squirell cage induction motor TEFCtype suitable for operation on 415 volts, 3 phase50 Hz AC supply with IP 55 class of protection forenclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-12615: 2018.194 DELHI SCHEDULE OF RATES (EandM)-2025(d) M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation dulyplastered and with anti vibration pads.27.3.2 180 lpm at 70 m Head
362	Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-`F` insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.27.4.1 900 lpm at 35 m Head
363	(a) Supplying, installation, testing andcommissioning of diesel engine driven main firepump conforming to IS 12469: 2019 suitable forautomatic operation and consisting of following,complete in all respects, as required : (Diesel DrivenPump)(b) Horizontal type, multistage, centrifugal pump ofcast of iron body and bronze impeller with stainlesssteel shaft, mechanical seal as required.193 DELHI SCHEDULE OF RATES (EandM)-2025(c) Suitable HP, 1500 RPM water cooled withradiator, diesel engine conforming to relevant ISstandard complete with auto starting mechanism, 12/24 volts electric starting equipment, diesel tank,exhaust pipe extended upto 10 m outside pumphouse duly insulated with 50 mm thick glass woolwith 1.0 mm thick aluminium sheet cladding,residential silencer, instruments and protection asper standard specification, stop solenoid for autostop in the event of fault with audio indications,painted with post office red colour etc. as required.(d) M.S fabricated, common base plate, coupling,coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation dulyplastered and with anti vibration pads.27.2.2 2850 lpm at 70 m Head
364	Providing, fixing, testing and commissioning of installation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required:(150MM dia
365	CONTROL PANELS27.5 Fabrication, supplying, Installation testing andcommissioning of Electrical control panel of cubicalconstruction, floor mounted type, fabricated out of2mm thick CRCA sheet, compartmentalised withhinged lockable doors, dust and vermin proof,powder coated of approved shade after 7 tanktreatment process, cable alley, inter-connection withsuitable size copper conductor cable/solid copperstrip, having switchgears and accessories,mountings and internal wiring, earth terminals,numbering etc. complete in all respect, suitable for195 DELHI SCHEDULE OF RATES (EandM)-2025main fire pump, pressurisation pump and diesel pumpset complete as per CPWD specification withfollowing in coming and Outgoings, suitable foroperation on 415V, 3 phase, 50Hz Ac Supply withenclosure protection class IP 42 as required :
366	Supplying, installation, testing and commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required- 2 Nos.(one to act as standby)Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set.Announcement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set.Amplifier change over switch for inter changing amplifier- 1No.Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No.Gooseneck microphone with stand and ON/OFF switch -1 No.Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters and ammeters terminal blocks etc. complete as required -1 set.Battery charger trickle cum boost to take complete load of fire alarm and PA system complete with all accessories including providing and fixing of 2 nos. 12 volt, 30 AH each sealed maintenance free batteries -1 set.
367	Supplying, installation, testing and commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
368	Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 150mm dia
369	Extnl LIGHT FEEDER PILLAR 2 Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.`
370	Finish walls with textured paint of required shade complete in all respect
371	Air condition system VRV/VRF type 400 BHP capacity with Hi wall mounting type indoor units complete wit required refrigerant piping and coabling and othe required accessories etc complete as per detailed design
372	Supply, Installation, Testing and Commissioning of 6-Core Multi mode OM3 metallic armored Fiber cable as per ISO/IEC-11801, Shall be able to Gigabit and 10 Gigabit Ethernet performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-X) and IEEE 802.3ae (10G Base-X) Tensile load should be 4000 Newton or higher and crush resistance should be 4000 Newton or higher ,The attenuation @ 850 nm should be = 2.7 (Max) db/Km and @ 1300 nm should be = 0.7 (Max) dB/Km, the fiber construction can be unitube or multitube, but tensile and crush resistance parameters should be matched, the jacket shall be FRLSZH complete in all respect.
373	Supply of Linear wall washer light in 24w with 24 degree medium beam in 3000k with inbuilt complete in all aspects with all accessories Bloat S is made up of Die cast aluminum and Powder coating is done for weather protection. Diffuser ensure the ingress protection and suitablity for all weather condition. Complete fitting is suitable for outdoor weather condition.
374	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, washers, gaskets conforming to IS 13095 of following sizes as required :150mm dia
375	UPS PANEL Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, Floor mounting type. The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
376	Supplying installation testing and commissioning of following capacity (continuous loading) BEE 4 Star rated (Corresponding Level as per BIS amended uptodate of receipt of tender) , 33/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Coregrade MOH or better, suitable for out door/indoor applications with On Load Tap Changer (OLTC) on HV side having AVR relay and Remote Tap ChangerControl (RTCC) for automatic sensing direction of Engineer in charge as per respective capacity. 500 KVA
377	Providing and fixing office building furniture complete in all respect as per satisfaction of Engineer-in-Charge- Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Haryana Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Mata Mansa Bhawan Office Building In Mansa Devi Complex, Sector 5D, Mdc, Panchkula Including Civil Work, Public Health Work, Electrical Internal And External Work, Fire Fighting, Cctv Camera And Lift Complete In All Respect, Panchkula-Haryana

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Mata Mansa Bhawan Office Building In Mansa Devi Complex, Sector 5D, Mdc, Panchkula Including Civil Work, Public Health Work, Electrical Internal And External Work, Fire Fighting, Cctv Camera And Lift Complete In All Respect, Panchkula-Haryana

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us