|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 3 | All as per item No 02 above but except bricks. |
| 4 | M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed. |
| 5 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed. |
| 8 | M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. . |
| 9 | M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on new surfaces and obtain smooth finish using sand paper ccomplete all as specified and directed. |
| 10 | M & L for preparation of new plastered surface and applying three coats of white wash on ceiling over one coat of primer etc complete all as specified and directed. |
| 11 | M & L for preparation of old surfaces by removal of existing treatmen and applying three coats of white wash on ceiling over one coat of primer etc complete all as specified and directed. |
| 12 | M&L for preparation of new plastered surface and applying on walls/ceiling and applying two coat of plastic emultion paint and applying one coat of wall care putty for smooth surfce, complete all as specified and directed. |
| 13 | M&L for preparation of old surfaces on walls/ceiling surface obtain smooth finish using sand paper incl complete removal of existing treatment and apply on wall/ceiling etc and applying two coats of plastic emulsion paint over a coat of acrylic primer incl 3mm thick of wall care putty for with complet smooth surface as per manufactures instruction , complete all as specified and directed. |
| 14 | M&L for preparation of old surfaces on walls/ceiling surface obtain smooth finish using sand paper incl complete removal of existing treatment and apply on wall/ceiling by comp, roof boarder, drops, fins, chajja / roof facia, column etc and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction , complete all as specified and directed. |
| 15 | M&L for preparation of new plastered surface on walls/ceiling,roof boarder, drops, fins, chajja / roof facia, column surface obtain smooth finish using sand paper and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction , complete all as specified and directed. |
| 16 | M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' in on concrete slab 100mm complete all as specified and directed. |
| 17 | M&L for Plain, Aluminium sheeting 0.56 mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed. |
| 18 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed. |
| 19 | M&L for non skid ceramic coloiured tiles joint free 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors etc complete all as specified and directed. |
| 20 | M&L for Glazed ceramic colour tiles joint free in vertical surface350x250x7/ 450x350x 7 mm thick set andjointed in neat cement slurry and pointed in white or colour cement to match with tiles including 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface etc complete all as specified and directted. Note : Shade & design as approved by EIC/GE. |
| 21 | M&L for Vitrified tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) for laying floor finishes having ulta/double charged/HD Vitrified tiles, complete all as specified and directed. |
| 22 | M&L for Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 23 | M&L for outdoor Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 24 | M&L for 18 to 20 mm thick Kota stone slab flooring (Machine cut) with mirror polishing of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring for laying floor finishes over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring complete all as specified and directed. |
| 25 | M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed. |
| 26 | M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick 1:3 cement mortar jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring complete all as specified and directed. |
| 27 | M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as specified and directed. |
| 28 | M&L for Mirror polishing on marbel/granite/Kota stone/stone work where ever required to give hogh gloss finish complete all as specified and directed. |
| 29 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and complete all as specified and directed. |
| 30 | M&L for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and complete all as specified and directed. |
| 31 | S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 32 | S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified and directed. |
| 33 | M&L for factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), complete all as specified and directed. |
| 34 | S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed. |
| 35 | S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, veneered type on both sides face is covered with any type colour decorative face with lipping/frame to match complete all as specified and directed. |
| 36 | S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC sheet on the front face & 2 mm thick prelam PVC sheet on back side, supplying & fixing in frame at site as per specification & drawingand complete all as specified and directed. |
| 37 | M&L for aluminium Anodized powder coated fixed frame of partiton or fixed window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specified and directed. |
| 38 | S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed. |
| 39 | M&L for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified and directed. |
| 40 | Easing and Adjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete all as specified and directed.Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules. |
| 41 | S&F of floor door spring etc complete all as specified and directed. |
| 42 | S&F of door closer hydraulically regulated design No 2 etc complete all as specified and directed. |
| 43 | S&F of Mortice lock 75mm vertical type 2 lever etc complete all as specified and directed. |
| 44 | S&F of Neoprene/EPDM Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and directed. |
| 45 | S&F of aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and directed. |
| 46 | S&F of 150 mm long aluminium tower bolts for aluminium door and window shutter etc complete all as specified and directed. |
| 47 | S&F of aluminium handles 150 mm long for aluminium door and window shutter etc complete all as specified and directed |
| 48 | S&F of aluminium handles 100 mm long for aluminium door and window shutter etc complete all as specified and directed |
| 49 | S & F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqm quality or description from steel frame and complete all as specified and directed. |
| 50 | S&F 10 to 12 mm thick frosted glass door with 08 Nos of holes and two steel hinges and steel handles not less than 300 mm long on both sides of door, incl necessary locking arrangement complete all as specified and directed. |
| 51 | M&L for 18mm thick water proof solid high gloss UV coated Action Tesa Board both sides smooth and gloss finish of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and directed. |
| 52 | S & F for 30 mm Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised complete all as specified and directed. |
| 53 | S&F for Magnetic catcher suitable for kitchen cabinet shutters, complete all as specified and directed. |
| 54 | S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 55 | S&F in repair for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts 150mm long (ISI Marked) complete all as specified and directed. |
| 56 | S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed. |
| 57 | S&F for Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, 300mm long, complete all as specified and directed. |
| 58 | S&F for Extruded brass handles, fabricated type polished 150 mm long complete all as specified and directed. |
| 59 | M&L in repair of one piece closet with bowl for coupled WC with PP soft seat cover , hinges fixing accessories and accessories set of size 360x640x680 mm, strap 220 mm with syphonic flushing cistern with necessary fittings complete all as specified and directed. |
| 60 | S&F in repair wash hand basin table top of size 600x400x175 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed. |
| 61 | S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 62 | S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe with all fittings, complete all as specified and directed. |
| 63 | S&Fix in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed. |
| 64 | S&F in repair for wall mixturer 3 in 1 system with provision for both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flanges (Without hand & overhead shower) complete all as specified and directed. |
| 65 | S&F for CP brass Centre hole mixer without pop up waste system with 450 mm long braided hoses, 20mm cartridge size for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and directed. |
| 66 | S&F in repair for CP telephonic jet with all fitting and fixture for EWCs with 8 mm Dia 1.2mt length long flexible tube of Make- Jaquar or equvelent complete all as specified and directed. |
| 67 | S&F for cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs complete all as specified and directed. |
| 68 | S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified and directed. |
| 69 | S & F for vitreous china sensor urinals size-485x300x740 mm including all necessary fittings etc complete all as specified and directed. |
| 70 | S & F for 8 mm thick toughend frosted glass urinal partitions including all necessary stainless steel fitting etc complete all as specified and directed. |
| 71 | S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified and directed. |
| 72 | S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 73 | S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified and directed. |
| 74 | S&F for PVC connections 45/60cm long superior quality with PTMT nut on both side complete all as specified and directed. |
| 75 | S&F in repair grating round 100 mm size of CP complete all as specified and directed. |
| 76 | M & L for vitreous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engr-in-charge. |
| 77 | S&F in repair of PVC flushing cistern low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern complete all as specified.complete all as specified and directed. |
| 78 | S & F in repair for CP towel racks with lower hanger complete all as specified and directed. |
| 79 | S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. . |
| 80 | S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. . |
| 81 | S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. . |
| 82 | S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length \\"medium grade \\" with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings complete all as specified and directed. |
| 83 | All as per item No 82 above but laid in trench or in floor |
| 84 | S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. . |
| 85 | Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m complete all as specified and directed. |
| 86 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone agg) as in plinth protection / path/ any paved area complete all as specified and directed. |
| 87 | M&L in repair for Soulwood WPC Exterior wall panelling size (2900x219x26) mm any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl L Corner, moulding end caps and necessary frame work for fixed and screws as required at site complete all as specified and directed. |
| 88 | S&F double legged door stopper of aluminium alloy with rubber complete all as specified and directed. |
| 89 | M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed. |
| 90 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris complete all as specified and directed. |
| 91 | M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area complete all as specified and directed. |
| 92 | M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and directed. |
| 93 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment incl 25mm thick sand filling complete all as specified and directed. |
| 94 | M&L for 60 mm thick machine cut precast concrete inter locking paver block except tile ,(M-35) grade, complete all as specified and directedNote : Any colours as approved by EIC /GE. |
| 95 | M&L for 80 mm thick machine cut precast concrete inter locking paver block except tile ,(M-40) grade complete all as specified and directedNote : Colours as approved by EIC /GE. |
| 96 | M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directedNote : Colours as approved by EIC /GE. |
| 97 | M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed. |
| 98 | M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor/sub base finishes complete all as specified and directed |
| 99 | S & F in repair for precast factry made reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of 60mm thick (size of the cover will be itimated by the Engineer-in-Charge) complete all as specified and directed |
| 100 | S&F mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works conforming to Fe-290 Gde E-165, complete all as specified and directed |
| 101 | S&F in repair precast factory made polycrete (SFRC) medium duty perforated drain cover 100 mm thick rectangle in shape upto 01 sqm area each with hole for drain complete all as specified and directed |
| 102 | Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed |
| 103 | M&L for Plain cement concrete (1:2:4) Type B-1, (using 20mm graded crushed stone aggregate), as in copings, kneelers , apex stones,bed plates, including weathering ,slightly rounded /benching or chamfered angles and throating , complete all as specified and directed. Note : Rates include for use of formwork. |
| 104 | M&L for cement concrete 1:3:6 type C2 (using 20 mm graded stone aggregate) as in surface channels, drains and bed of manhole complete all as specified and directed |
| 105 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 106 | M & L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, and mass concrete complete all as specified and directed |
| 107 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works complete all as specified and directed |
| 108 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 complete all as specified and directedNote : Reinforcement shall be measured and paid for separately under respective item of schedule 'A'/BOQ. |
| 109 | S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 110 | Removing daberies/excavated material to a distance exceeding 1.5KM but not exceeding 5 KM and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed Please Enable Macros to View BoQ information |
