|
| 1 | Schedule 'A' Part - I (BUILDINGS AND STRUCTURES)This Schedule (contains under mentioned Sl. item No. 1.01) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. |
| 2 | Construction of Examination hall with RCC framed structure with permanent specifications, ATT, WPT by APP etc complete all as shown on drawings and as per specification. |
| 3 | Lump sum price worked out by the Contractor for “EXCAVATION, EARTH WORK AND SITE CLEARANCE” as listed in Schedule ‘A’ Part - II representing _______ % ______________ percent Above / Below the lump sum price of ₹ 3,20,515.92 inserted by the MES in Schedule ‘A’ Part - II |
| 4 | Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION ” as listed in Schedule ‘A’ Part - III representing __________ % ____________ percent Above / Below the lump sum price of ₹ 3,05,357.97 inserted by the MES in Schedule ‘A’ Part - III |
| 5 | Lump sum price worked out by the Contractor for “ INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - IV representing __________ % ___________ percent Above / Below the lump sum price of ₹ 14471.27 inserted by the MES in Schedule ‘A’ Part - IV |
| 6 | Lump sum price worked out by the Contractor for “ ROAD/PAVEMENT/HARD STANDING ” as listed in Schedule ‘A’ Part - V representing __________ % ___________ percent Above / Below the lump sum price of ₹ 741116.29 inserted by the MES in Schedule ‘A’ Part - V |
| 7 | Lump sum price worked out by the Contractor for “ SEWAGE DISPOSAL ” as listed in Schedule ‘A’ Part - VI representing ___________ % _________________ percent Above / Below the lump sum price of ₹ 866929.96 inserted by the MES in Schedule ‘A’ Part - VI |
| 8 | Lump sum price worked out by the Contractor for “ AREA DRAINAGE” as listed in Schedule ‘A’ Part - VII representing ______ % _________________ percent Above / Below the lump sum price of ₹ 559820.01 inserted by the MES in Schedule ‘A’ Part - VII |
| 9 | Lump sum price worked out by the Contractor for \\"RCC RETAINING WALL” as listed in Schedule ‘A’ Part - VIII representing _______ % __________________ percent Above / Below the lump sum price of ₹ 100887.80 inserted by the MES in Schedule ‘A’ Part - VIII |
| 10 | Lump sum price worked out by the Contractor for \\"RAIN WATER HARVESTING” as listed in Schedule ‘A’ Part - IX representing _______ % __________________ percent Above / Below the lump sum price of ₹ 11050.85 inserted by the MES in Schedule ‘A’ Part - IX |
| 11 | Lump sum price worked out by the Contractor for \\"EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - X representing _______ % __________________ percent Above / Below the lump sum price of ₹ 293480.59 inserted by the MES in Schedule ‘A’ Part - X |
| 12 | Lump sum price worked out by the Contractor for \\"EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - XI representing _______ % __________________ percent Above / Below the lump sum price of ₹ 133330.64 inserted by the MES in Schedule ‘A’ Part - XI |
| 13 | Lump sum price worked out by the Contractor for \\"AIR CONDITION & REFRIGERATION” as listed in Schedule ‘A’ Part - XII representing _______ % __________________ percent Above / Below the lump sum price of ₹ 109206.38 inserted by the MES in Schedule ‘A’ Part - XII |
| 14 | Schedule 'A' Part - XIIIThis Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 14.00 to 25.00 |
| 15 | INTERNAL ELECTRIFICATIONS & F Vertical loadline type TPN DB 4 way double door with provn of incoming as MCCB made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar complete all as specified and as directed . |
| 16 | SEWAGE DISPOSAL Supply & Laying of 150 mm internal dia DWC HDPE SN-8 pipes confirming to IS 14930 part 2/IS 16025 part-24, laying including all necessary specials, cutting and joining as specified and directed. |
| 17 | EXTERNAL ELECTRIFICATION S&F of hot press moulded SMC junction/terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 2 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixed on pole by means of clamps made out of MS flat iron of size 25mm x 3 mm 2 Set all as specified and as directed. Make : Sintex/C&S/Havells. |
| 18 | Supply, installation, testing & commissioning of totally enclosed feeder pillar outdoor type of size (1mx1mx0.5m) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powder coated double door type (independent cabin including locking arrangement for each MCCBs/MCB, bus bar chamber enclosed complete suitable for operating on 415 Volt 50 Hz AC supply internally wired with copper conductor having legs 90 cms made out of 50x50x6 mm angle iron grouted on brick masonary platform upto 45 cms. Brick masonary platform should be 60 cms above the Ground Level. Comprising the following:- .Note:- (i) The panel shall be front operated with cable entry from the bottom with cable glands. Earth bus shall be part of the main feeder pillar. (ii) Fabrication of feeder pillar box to be done with 3.15mm thick CRCA Sheet (iii) Cost for construction of platform for panel of brick masonary work in CM 1:6 with foundation PCC 1:4:8 type D-2 including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No Extra payment will be made. (iv) MCCB's should be connected with extensions terminals at both side (incoming and outgoing). |
| 19 | Incoming: (a) MCCB 4 Pole, 415 V, capacity 63 Amps 16KA- 01 No Out going : (b)MCCB 4 pole fixed type, 40 Amp, 415 Volts 16 KA – 01 Nos (c) Street light Timer with Contactor - 01 Set (d) MCB TPN 6-32 A- 01 No (e) Indicating lamps (set 03 Nos) - 01 set (R,Y & B) (f) Panel wiring with suitable size PVC insulated heavy duty 1100 volts grade single core cable with copper conductor multistranded with cable end termination lugs. |
| 20 | M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure as specified and directed. |
| 21 | Supply and fixing of street light bracket made out of 40 mm bore mild steel GI light grade tubing over all length 1.5 mtr bend to shape as directed including providing two Nos MS flat iron 40x6 mm clamp of appropriate size with nut bolts and washer duly painted with two coat of synthetic enamel paint over a coat of primer (GI surface shall not be painted) complete all as specified and directed. |
| 22 | EXTERNAL WATER SUPPLY Cutting existing steel tubing for alternations or additions and screwing existing steel tubing for alternations or addtions or lengthening screwd on pipe to from connector of 80 to 40mm complete all as specified and directed. |
| 23 | M & L for construction of new valve chamber 90x90x90 cm inner dimensions, brick masonary in cm 1:4 PCC base in 1:3:6 of 7.5 cm thick & plastering 15 cm thick in CM 1:4 in inner side/ coping of all chamber, fabrication of Iron frame 40x40x6 mm size angle iron MS cover 3 mm thick with hinges and locking arrangements duly painted including excavation, earth work complete all as directed. |
| 24 | AIR CONDITION & REFRIGERATION S&F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250 V with output voltage stabilized at 230 V with accuracy and of capacity 1 KVA complete all as specified and directed. Make: Sinetrac- WMD1000U3T/Volina-140-280V/Microtech-PEARLEM4170+PLUS |
| 25 | FIRE FIGHTING SYSTEM Supply and fixing of Dry powder ABC stored pressure squeeze grip type fire extinguishers, 6 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) complete all as specified and directed. |
| 26 | Supply & Installation of Water Stored pressure type Fire Extinguisher of 9lit capacity,fitted with discharge control valve (Squeeze grip type) CEmarked and pressure gauge, with discharge hose and open nozzle and supplied complete with initial charge as per IS:15683 with ISI mark and wall bracket. Fire Rating 2A all as specified and directed. |
| 27 | Supply & fixing of 4 Nos of 9 lts capacity round bottom sand /water buckets along with round bottom type , enamel painted white inside and red outside & letter fire in black outside & handle with mounting bracket along with suitable MS stand to install the buckets as per the local fire standards complete all as specified and directed. Please Enable Macros to View BoQ information |
