|
| 1 | Earthwork in all kinds of soil excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed. |
| 2 | P/L in position Cement conc. 1 cement:4fine sand:8graded crushed stone agg. 40 mm excluding the cost of centring & shuttering all work upto plinth level. |
| 3 | P/L in position Cement conc. 1 cement:3fine sand:6graded crushed stone agg. 20 mm excluding the cost of centring & shuttering all work upto plinth level. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 8 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 9 | Providing and laying Damp proof course 50 mm thick with cement concrete 1:2:4 and curing complete |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels:- Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for:Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for:Columns, pillars, piers, abutments, posts and struts. |
| 16 | Half Brick Massonary with common Burnt clay brick with class designation 75 A incl curing in cement mortor 1:4 |
| 17 | Extra for Half Brick Massonary in super structure above plinth level upto floor level V |
| 18 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 19 | 12 mm Cement plaster on the rough side of single or half brick walls of mix 1: 6 (1 cement :6 fine sand ) all complete including making of groves and scaffolding etc. at all floor levels complete externally |
| 20 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 21 | 6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 22 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 23 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 24 | Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm |
| 25 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand andmanufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 28 | P/L in position Cement conc. 1 cement:2 fine sand:4 graded crushed stone agg. 20 mm excluding the cost of centring & shuttering all work upto plinth level. |
| 29 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 30 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 31 | Distempering with oil bound distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade |
| 32 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 33 | Painting synthetic enamel paint of approved brand and manufacture on wood work (two or more coats) including primer coat incl cost of material and carriage involved |
| 34 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes of 110 mm. |
| 35 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm |
| 36 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 30 mm |
| 37 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class deodar wood 35mm |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc 15mm nominal outer dia pipes. |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc 20 mm nominal outer dia pipes. |
| 40 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 41 | Providing & fixing white vitreous China Flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard Flush Pipe and C.P. brass spreaders with brass unions & G.I.clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Range of two urinal basins with 5 Litres white P.V.C automatic flushing Cistern. |
| 42 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 43 | Providing & fixing wash Basin with C.I. brackets , 15mm C.P Brass pillar taps, 32mm C.P brass waste of standard pattern , including painting of fittings and brackets, cutting & making good the walls wherever required.White Vitreous China wash basin size 550 x 400mm with a single 15mm C.P brass Pillar tap. |
| 44 | Providing and fixing 15 mm nominal bore C.P.brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 45 | Providing and fixing 15 mm nominal bore C.P.brass bib cock of approved quality conforming toIS:8931. |
| 46 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931. |
| 47 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in -charge. |
| 48 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 49 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20mm Nominal Bore |
| 50 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 20 mm nominal bore |
| 51 | P/F 8mm dia C.P/S.S Jet with flexible tube to 1 meter long s.s Trianglar plate to European type W.C of quality |
| 52 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter |
| 53 | Providing & fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible Pipe 32mm dia |
| 54 | Providing & fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 1500x450 mm |
| 55 | Providing & fixing 600 x 120 x5 mm Glass shelf with edges round off supported on anodized aluminum angle frame with C.P brass brackets ang guard rail complete fixed with 40 mm long screws, rawl plugs,etc complete. |
| 56 | Providing & fixing PTMT Gratings of approved quality & colour. 100mm nominal Dia. |
| 57 | Providing and fixing PTMT Towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37mm from wall face with concealed fitting arrangements of approved quality and colour, weighing not less than 88 gms. |
| 58 | Providing and fixing PTMT Towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangements of approved quality and colour: 450mm long towel rail with total length of 495 mm ,78 mm wide and effective height of 88mm ,weighing not less than 170 gms |
| 59 | Providing and fixing PTMT waste Coupling for Wash basin and sink,of approved quality and colour.waste coupling 31mmof79mm length and 62mm breadth weighing not less than 45 gms. |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 61 | Providing & installation of 1 HP three phase water pump with all fittings Electrical connection & starter Complete |
| 62 | Providing and fixing electric points complete in all respects as per necessity at site including laying of PVC conduit pipes, junction box, module,MCB and laying of electric wires of a approved make and thickness and fixing of switches, installation and testing complete job |
| 63 | Labour engaged for various minor works Emergent nature required at site Labourer |
| 64 | Labour engaged for various minor works Emergent nature required at site Plumber |
| 65 | Labour engaged for various minor works Emergent nature required at site Carpenter |
| 66 | Labour engaged for various minor works Emergent nature required at site Welder |
| 67 | Heir Charges of Welding Set including Welding rod Complete. |
| 68 | Supply and fixing 20/22 watt LED light/Tube/al. hosing with 2000 lumens |
| 69 | Providing and fixing of Exhaust fan (Complete) |
| 70 | Supplying and fixing of ceiling fan 1200 mm Sweep of approved brands complete |
| 71 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). |
| 72 | Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less then grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screw etc complete 250x16 mm |
| 73 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm |
| 74 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete: 125 mm |
| 75 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screw etc. complete |
| 76 | Carriage of material by mechanical transport incl loading , unloading(complete ) for Sand & bajri upto lead 10 Km by MT |
| 77 | Bricks up to lead 10 Km by MT Please Enable Macros to View BoQ information |
