|
| 1 | Part A. Provading & fixing of Various Civil and Carpetar Works at Boys Hostel No 10,11 & 12 NFSU Dharwad Campus |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shut ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of area beyond 3 m (Vol-2, P.No.187, I.No.19.12) |
| 3 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge (Vol-2, P.No.202, I.No.20.47) |
| 4 | Repairing door and window frames with available wood to the required size (Vol-2, P.No.207, I.No.20.103) |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge. (Vol-2, P.No.193, I.No.19.55) |
| 6 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Vol-2, P.No.84, I.No.11.26.1) |
| 7 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. (For Roof and Water Tanks) (Vol-2, P.No.201, I.No.20.38) |
| 8 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates (Vol-1, P.No.13, I.No.4.3) |
| 9 | BBM :Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (Vol-1, P.No.16, I.No.46.3) |
| 10 | Providing 18mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (Vol-1, P.No.45, I.No.8.24) |
| 11 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately Size 62 x 100mm (Vol-2, P.No.111, I.No.12.93.1) |
| 12 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately Size 62 x 150 mm (Vol-2, P.No.111, I.No.12.93.3) |
| 13 | Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S framework required with priming coat shall be paid separately). (Vol-2, P.No.112, I.No.12.95) |
| 14 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm (Vol-2, P.No.107, I.No.12.74.1) |
| 15 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete(Vol-2, P.No.105, I.No.12.63) |
| 16 | Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 200mm (Vol-2, P.No.105, I.No.22.15.2) |
| 17 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge: Polyester powder coated minimum thickness 50 micron aluminium including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Vol-2, P.No.105, I.No.22.15.2) |
| 18 | Providing and fixing door latch with necessary screws etc complete. (Vol-2, P.No.108, I.No.12.81) |
| 19 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness completes (Vol-2, P.No.199, I.No.20.28) |
| 20 | Aluminium Wire Mesh with SS Coating Net Roll, 15 Mesh, 0.4mm Diameter Hole, 1mm Thick for Woven mesh Window Screens, (Market Price) |
| 21 | Part B: Electrical Repair Work, Supply & fixing of Light fixtures at Boys Hostel No 10,11 & 12 NFSU Dharwad Campus |
| 22 | Supplying and fixing of 6A One Way Switch modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. |
| 23 | Supplying and replacing ceiling fan regulator 900mm to 1500mm. |
| 24 | Supplying and fixing of 16A One Way Switch modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. |
| 25 | Supplying and fixing of 16A One Way Switch modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. |
| 26 | Supplying & fixing of retrofit type - LED bulb 3 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. |
| 27 | Supplying & fixing of retrofit type - LED bulb 9 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. |
| 28 | Supplying and fixing of LED light fitting 1 x 4feet-PVC Batten with integrated LED tube 20-20 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. |
| 29 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076\\" twin twisted PVC insulated wires, required Nos of round blocks and clamps (On wall/ ceiling / Rafter / Girders) |
| 30 | Supplying of 48\\" Sweep (1200 mm) Regular model capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. |
| 31 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. |
| 32 | Supplying and fixing/replacing of 15mfd condenser for ceiling fan/MV/ SV/MH and other luminaries. |
| 33 | Supplying And fixing/replacing of 6A Batten/Angle Holder electrical accessories on existing switch board. |
| 34 | Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws |
| 35 | Supplying and fixing of 6A Bell Push modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. |
| 36 | Supplying 25litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. |
| 37 | Part C: Supplying and fixing of various plumbing materials, and Bath room fixtures in Boys’ hostel 10, 11 and 12 at NFSU transit campus |
| 38 | Mirror : Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing . (Vol-2, P.No.136, I.No.14.32) |
| 39 | Wash basin : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requir. White Vitreous China Surgeon type wash basin of size 660x460 mm witha pair of 15 mm C.P. brass pillar taps with elbow including operated levers (Vol-2, P.No.133, I.No.14.7.8) |
| 40 | CPVC PIPE: Providing and fixing of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Vol-2, P.No.122, I.No.13.32.1) |
| 41 | Providing and fixing Bib cock Two way with wall flange made of PTMT with all concealed fitting arrangements & all necessary accessories complete |
| 42 | Towel rail : Providing and fixing Towel rail (Rectangular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium (Vol-2, P.No.144,I.No.14.87) |
| 43 | Water storage tank : Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Vol-2, P.No.123, I.No.13.34) |
| 44 | UPVC Pipes : Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm nominal dia Pipes (Vol-2, P.No.125, I.No.13.50.3) |
| 45 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 15 mm nominal dia Pipes (Vol-2, P.No.125, I.No.13.50.1) |
| 46 | Angle cock : Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a) Economy (Vol-2, P.No.139, I.No.14.52) |
| 47 | Waste pipe : Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40mm dia (Vol-2, P.No.136, I.No.14.28.2.2) |
| 48 | Bidet spray : Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Premium (Vol-2, P.No.145, I.No.14.95) |
| 49 | Valve: Providing and fixing in position 65mm nominal bore non-return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.10 / 13.13 |
| 50 | Waste Coupling: Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g (Vol-2, P.No.137, I.No.14.36.2) |
| 51 | Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete (Vol-2, P.No.143, I.No.14.81) |
| 52 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. (Vol-2, P.No.119, I.No.13.14) |
| 53 | Providing and fixing washing machine bib cock of approved quality conforming. (Market Price) |
| 54 | Providing and fixing of tank fittings & fixtures like tank nipple, collor, elbow etc for installtion of new water tanks. (Market Price) |
| 55 | Providing and fixing of Inlet pipe for 1 meter length fixing of flush tanks, hand wash etc. (Market Price) |
| 56 | Providing and fixing of Float ball valve for fixing the water tanks. (Market Price) |
| 57 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-whitte (Vol-2, P.No.135, I.No.14.19.1) |
| 58 | Providing and fixing of Inlet and out let pipe for 1.5 meter length fixing of Geyser tanks etc. (Market Price) |
| 59 | Heavy duty polycot stand or trolley for top load washing machines 7.5 to 9 KgsDESIGN: Square frame with 59 Cm width and 59 Cm length to accommodate 7.5 to 10 Kg Washing Machines.STURDY CONSTRUCTION: Heavy-duty metal frame in white powder coating ensures durability and long-lasting performance Sizes: 23 Inches x 23 InchesMOBILITY: Four smooth-rolling wheels allow easy movement of washing machine for cleaning and maintenance, Two Front Wheels Comes with Stoppers, For Stability.FLOOR PROTECTION: Robust wheels with quality castors prevent scratches and damage to floor surfaces.LOAD CAPACITY: Strong metal construction provides stable support for heavy top-loading washing machines.. (Market Price) |
| 60 | Repair and renovation of drainge line work and other job works Please Enable Macros to View BoQ information |
