|
| 1 | Boring of 20cm dia piles of single under reamed of 50cm dia of bulb and 3.5 meter depth in black cotton soil with hand operated auger machine including all laboure T&P etc. for proper completion of work as per IS code-2911(Part-III) 1980. |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:(All kinds of soil)As per DSR-2.1.1 |
| 3 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.As per DSR-2.27 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).As per DSR-4.1.8 |
| 5 | Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth Cement morter 1:4 .As DSR NO.- 6.1.1 |
| 6 | 2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4\\") graded approved stone laid in panels finished with 3mm (1/8\\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8cm (3\\") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. |
| 7 | CEMENT PLASTER (IN FINE SAND)12 mm cement plaster of mix :in 1:4 (1 cement: 4 fine sand).AS per DSR No.- 13.1.1 |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) :.As per DSR-5.2.2 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars.As per DSR-5.22.1 |
| 10 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.As per DSR No.- 10.1 |
| 11 | Providing and Laying of Rubble moulded Zig Zag Interlocking Concrete Blcok Pavements having thickness 80 mm as per drawing and Technical Specification Clause 1504 |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns.As per DSR-4.3.1 |
| 13 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating not less than 275 gm/m²As per DSR No.- 12.2.2 |
| 14 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm).As per DSR No.- 13.46.1 |
| 15 | Supply & fixing of flush doors commercial quality conforming to IS 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) Single leaf (35 mm Thick). As per DSR No. - 9.20.1 |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Asper DSR No.- 13.62.1 |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 18 | Wiring points for light with 1 sqmm.FRLSH PVC insulated single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulatedmultistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. |
| 19 | Same as item No.(1) but for fan and light duty exhaust fan. |
| 20 | plug point with modular switch & socket in place of piano type switch & socket. |
| 21 | Supply and erection of AC 230/250 Volts 50 Hz Cilling fan including providing nuts bolts amounting frame & other accessories including connection etc. complete as required (Crompton Greaves/ GEC / Orient or equivalevt mark)(a) - 1200 mm Sweep |
| 22 | Supply & wiring of sub-main with 2 nos 2.5 sqm FR P.V.C. insulated 1100 volts grade multistand single core copper conductor cable in 20 mm diameter heavy duty 2mm thick P V C conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete . |
| 23 | Supply & wiring of sub-main with 2 nos 4 sqm FR P.V.C. insulated 1100 volts grade multistand single core copper conductor cable in 20 mm diameter heavy duty 2mm thick P V C conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete . |
| 24 | Supply and fixing of flush/surface mounting distribution boards without MCB with additional metal door complete in all respects.(CAT:B)8 Way SPN |
| 25 | Supply & fixing of 5/6/7.5/10/15/20/25/30/32 Amp SPMCB 9 KA/10 KA |
| 26 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.CAT- AAA |
| 27 | Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer- in-charge.40 Amp. DP MCB Please Enable Macros to View BoQ information |
