|
| 1 | Civil work for operators room near Sulphur melting pit at SO2 acid plant FACT-UC. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m in all kinds of soil. |
| 3 | Cement concrete work in 1:4:8 mix using first class 40mm nominal size hard granite broken stones including all charges for mixing concrete, laying, consolidating, curing etc. complete foundation/levelling course, flooring etc. complete but excluding cost of formwork. |
| 4 | RCC work in 1:1½:3 nominal mix using 20 mm and downgrade hard granite broken stone including all charges for mixing concrete, laying, consolidating, curing etc.complete but excluding cost of form work & reinforcement works- For foundation footings, bottom & sides of trenches, equipment foundations, plinth beams, lintels, slabs, columns & beams etc.up to 5 m from ground level. |
| 5 | Cement plastering with CM 1:4,12 mmthick and a neat cement flushing coat of cement and red oxide powder (red oxide@ 3.50 kg/50 kg of cement) for finishing smooth the concrete floor & trowelled smooth at all levels. |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 7 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of cement |
| 8 | Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer in charge for superstructure in ground floor/upto 5m height from plinth level/floor level. |
| 9 | Providing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete with Thermo-Mechanically Treated bars of grade Fe-500D (TMT bars) including cost of reinforcement steel |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. |
| 11 | Providing formwork to RCC works with necessary wooden planks, joists, runners, posts etc.including removal after completion of works for slabs up to 5 m height from ground level |
| 12 | Providing formwork to CC/RCC works with necessary wooden planks, joists, runners, posts etc.including removal after completion of works for walls, floors,shades, lintels & beams up to 5 m from plinth level |
| 13 | Cement plastering with CM 1:4,12 mm thick one coat floated hard and trowelled smooth at all levels,excluding cost of cement |
| 14 | Applying water thinnable cement primer one coat for exterior and interior walls of approved brand and manufacture at all heights including cost of all materials, labour etc.complete |
| 15 | Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well. |
| 16 | Providing and fixing Ist quality vitrified wall tiles conforming to IS: 15622 (min 8mm thickness), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,including pointing inwhite cement mixed with pigment ofmatching shade complete. |
| 17 | Providing and laying antiskid vitrified floor tiles in Size of Tile 600x600 mm (min 8mm thickness) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with whitecement and matching pigments etc., |
| 18 | Supplying and fixing PVC floor trap (single or multy type) of approved brand 110 mm size with required provision of outlets and inlets as per manufacturers specifications, cutting and making good the walls and floors, etc. complete. |
| 19 | Supplying and fixing 125 mm (5 inch) Stainless steel floor gratings (two piece) to PVC trap as per instructions at site |
| 20 | Supplying conveying and fitting 550x400mm or nearest size wash hand basin of white glazed vitreous china approved quality with a pair of special alloy bolts for fixing the basin on walls with 1 No. 15 mm heavy type CP brass pillar tap of approved make 1no.heavy type 15mm PVC connection and 1No.15 mm CP regulating valve of superior make ,1No. 15 mm CP waste coupling,32 mm PVC waste pipe with cp learning nut 1No. etc. including cutting and making good the walls,etc. complete. |
| 21 | Supplying and fixing white glazed Orissa pattern W.C pan (HINDUSTAN or equivalent) of size 530x410mm with P/S trap including embedding the closet and trap in cement concrete, giving connection to the sewer line with all necessary specials, cutting and making good the walls and floors wherever required etc. complete as per direction at site. |
| 22 | Supplying and fixing white glazed vitreous china flat back lipped front urinal of size 430x380x230mm or nearest size (Indian make best quality ) with 1 no. 15mm pvc heavy type connection with CP learning nut and 1 no. 15mm CP regulating valve(Jauger or equivalent) of superior make , CP spreader with flush pipe , fixing the urinal to wall with necessary wooden plugs & iron screws including cutting and making good the walls etc. complete. |
| 23 | Providing and fixing 10 litre capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 24 | Supplying Angle valve with wall flange of standard range (CERA,JOHNSON or equivalent) |
| 25 | Supplying Long body bib cock of standard range CERA/JOHNSON or equivalent type |
| 26 | Supplying 600 x 450 mm or nearest size bevelled edge mirror of approved qualitysuperior make \\" with hard board or plastic sheet on the rear and fixing the same in position with necessary plugs & SS screws etc complete |
| 27 | Suppling and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete |
| 28 | Supplying Health faucets of standard range approved by Engineer-in-Charge (CERA,JOHNSON or equivalent brand) |
| 29 | Supplying and fixing best quality SS soap dish including cost of screws, wooden plugs etc. |
| 30 | Supplying, laying and jointing with solvent cement, Rigid PVC pipes conforming to IS 4985 Class V (10 Kg/cm2 pressure rating) for water lines with all required concealed (brass embeded) PVC specials, such as Tees, bends, elbow, union, reducer etc. with clamps if any including necessary cutting and making good the walls, earth work if required etc.complete for 25 mm OD Pipe |
| 31 | Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines:110mm or nearest outer diameter |
| 32 | Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines 75mm or nearest outer dia. |
| 33 | Providing and fixing PVC door of syntex or equivalant make with shutter frame made of extruded plastic section having dimension of 60 x 24 mm or nearest, paneling with single panel hollow plastic section of 20 mm thick with average wall thickness of 1 mm and outer frame of door made of extruded plastic section of 48 x 40 mm or nearest including providing and fixing all required fittings such as stainless steel butt hinges, PVC tower bolts, PVC handles etc.complete as per manufacturers specifications. Please Enable Macros to View BoQ information |
