|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. as required. |
| 2 | GROUP B |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. |
| 4 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 5 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 6 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 7 | GROUP B |
| 8 | Supplying and drawing following sizes of FRLS PVC insulatedcopper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. |
| 9 | 3 x 2.5 sq. Mm |
| 10 | 3 x 4 sq. Mm |
| 11 | 3 x 6 sq. mm |
| 12 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 13 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 14 | Suppling and drawing following sizes of medium class PVC conduit along with accessories in sueface/recess including cutting the wall and making good the same in case of recessed conduit as required: |
| 15 | 20mm (Rs.128*1.0633) |
| 16 | 25 mm |
| 17 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Add [email protected] on DSR) |
| 18 | (a) 5/6 A switch. |
| 19 | 3 pin 5/6 A socket outlet |
| 20 | Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc.as required. |
| 21 | 3 Module (100mmX75mm |
| 22 | 8 Module (125mmX125mm) |
| 23 | 12 Module (200mmX150mm) |
| 24 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 25 | Single Pole |
| 26 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 27 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 28 | 8 way , Double door (Add MF Rs. 2573 x 1.0633 = 2736) |
| 29 | 12 way , Double door (Add MF Rs. 2315 x 1.0633 = 2462) |
| 30 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 31 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required |
| 32 | Supplying, Installation, Testing & Commissioning of 4 feet nominal size LED batten having extruded PVC housing, colour temperature 6500K having wattage not more than 20 watt and lumen out put not less than 1800 luman directly on ceiling / wall including, connection with 1.5 sq.mm, FRLS PVC insulated copper conductor single core cable and earthing etc. as required. |
| 33 | Dismentalling the burnt winding of ceiling fan and rewinding the same with with the help of suitable copper wire,paper,sleeve pipe,thread and lead wire and change of bearing complete in all respect. |
| 34 | Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speedcontrol and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required. |
| 35 | S/f of exhaust fan of sweep size 300mm,speed 1350 rpm suitable to work on 220/240 v ,50 hz ,AC supply ,ISI certfied heavy duty 100%copper winded motor with double ball bearing ,corrosion protection and with rust proof body and blades complete etc as reqd . |
| 36 | Supply of Heavy duty Exhaust fan shutter / louver frame made of metal suitable for 300/380 mm exhaust fan finish with grey paint, corrosion protection with rust proof body complete etc as required. |
| 37 | Supplying, installation, testing and commisioning of 50 watt LED flood light with new generation energy saving and environment long life versatile powder coated die cast aluminium, IP 66, luminaire efficacy > 100 lm/W, CCT 5700K, CRI > 70, THD < 10%, built-in surge protection 4 kV, External Surge Protection 10 kV, Power factor > 0.95, IK07, the driver should be potted, capable to withstand 440V for 8 Hrs with high power LED light source with secondary lens complete etc. As required housing reflector and enclosed with toughened glass complete with all accessories. |
| 38 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 39 | rebate on dismantled 4 feet nominal 20watt LED batten fitting |
| 40 | rebate on ceiling fan |
| 41 | rebate on dismantled wiring with allied material Please Enable Macros to View BoQ information |
