|
| 1 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and as directed by Engineer-in-charge. |
| 2 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4.0 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and as directed by Engineer-in-charge. |
| 3 | S&F Factory made pressed steel frames of profile width 125 mm x 60 mm, fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, 04 Nos of hinges 100 mm size medium weight, lock strike plate etc., & one shop coat of primer complete all as specified and as directed by Engineer-in-charge. |
| 4 | S&F Factory made pressed steel frames of profile width 105 mm x 60 mm, fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, 04 Nos of hinges 100 mm size medium weight, lock strike plate etc., & one shop coat of primer complete all as specified and as directed by Engineer-in-charge. |
| 5 | S&F factory made Flush shutters, 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on one side and other face covered with decorative face veneer of thickness 1.5 mm with lipping/ frame to match complete all as specified and as directed by Engineer-in-Charge. |
| 6 | S&F factory made Glazed and skeleton shutters, 35 mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. |
| 7 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Clerestory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed Stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ Stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: Material test certificate & authenticity certificate shall be produced by contractor while claiming payment. |
| 8 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter all as per direction of Engineer-In- Charge. Note: Material test certificate & authenticity certificate shall be produced by contractor while claiming payment. |
| 9 | M&L 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L for Plywood (soild), 18/19 mm thick, BWR grade, type BB, fixed with screws to timber frame work including PVC self adhesive tape as beading in cub board shelves/ cabinet works complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L for 0.9 mm thick Decorative laminate, type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Supply and fixing of factory made 25 mm thick single extruded WPC (Wood Polymer Composite) solid Plain board comprising of virgin polymer of K value 58-60 (suspension grade) calcium carbonate & natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant, including PVC Beading on exposed surface complete all as specified and as directed by Engineer-in-Charge. Note : Material test certificate & authentication shall be provided by the manufacturing company. |
| 13 | Supply and fixing of factory made 25 mm thick single extruded WPC (Wood Polymer Composite) board, solid with single side PVC Laminate with PVC foil of minimum 14 Microns thick of approved colour shade, board comprising of virgin polymer of K value 58-60 (suspension grade) calcium carbonate & natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant, including PVC Beading on exposed surface complete all as specified and as directed by Engineer-in-Charge.Note : Material test certificate & authentication shall be provided by the manufacturing company. |
| 14 | S&F Solid PVC Wall Lining consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on wall/ PVC frame as per specifications and drawing, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | S&F Stainless steel cupboard locks, 2 lever with 2 Nos of keys complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L for providing cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) in blocks for fixing hold fasts, for back filling the chowkats, in coping, bed plates, weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed by Engineer-in-charge. |
| 17 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless wire staples complete all as specified and as directed by Engineer-in-charge. |
| 18 | S&F 4 mm thick plain float glass, ordinary quality, size in squares not exceeding 0.5 Sqm in each pane and glazing with silicon sealant complete all as specified and as directed by Engineer-in-charge. |
| 19 | S&F 4.8 mm thick plain float glass, ordinary quality, size in squares exceeding 0.5 Sqm in each pane and glazing with silicon sealant complete all as specified and as directed by Engineer-in-charge. |
| 20 | S&F Stainless steel butt hinges, medium weight 100 mm size with stainless steel screws complete all as specified and as directed by Engineer-in-charge. |
| 21 | S&F mild steel helical door spring, 300 mm long ordinary rat tail pattern spring including roller & roller plate complete fixed to wooden/ steel chowkats complete all as specified and as directed by Engineer-in-charge. |
| 22 | S&F 150 mm long extruded section aluminium alloy anodised handles, fabricated type with stainless steel screws complete all as specified and as directed by Engineer-in-charge. |
| 23 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150 mm long with stainless steel screws complete all as specified and as directed by Engineer-in-charge. |
| 24 | Supply and fixing aluminium alloy anodised sliding door bolt 300 mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed by Engineer-in-charge. |
| 25 | S&F floor door stopper of aluminium alloy body and tongue, anodised with 140 mm long cover plate and hard drawn steel spring, fixed in floor complete all as specified and as directed by Engineer-in-charge. |
| 26 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with 140 mm long cover plate and hard drawn steel spring, fixed in floor complete all as specified and as directed by Engineer-in-charge. |
| 27 | S&F Continuous (piano) hinges, width of flap 30 mm, stainles steel, bright finish or electrogalvanised including star head with stainless steel screws complete all as specified and as directed by Engineer-in-charge. |
| 28 | Supply & Fixing for chrome plated food grade stainless steel wire in any baskets of a moduler kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley, plain basket, bottle pull out etc.,), min loading capacity 65 KG, made by minimum 6 mm dia stainless steel round bars, proper welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per design approved, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, SS screw etc., complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 29 | Supply & Fixing for chrome plated food grade stainless steel wire in any baskets of a moduler kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley, plain basket, bottle pull out etc.,), min loading capacity 65 KG, made by minimum 6 mm dia stainless steel round bars, proper welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per design approved, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, SS screw etc., complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
