|
| 1 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) completed all specified and directed. |
| 2 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) completed all specified and directed. |
| 3 | Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each completed all specified and directed. |
| 4 | Taking down shutters of any description exceeding 2 Sq. M each completed all specified and directed. |
| 5 | S&F Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR part I specification completed all specified and directed. |
| 6 | S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR part I specification completed all specified and directed. |
| 7 | M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good complete all as specified and directed. |
| 8 | S&F for 2nd class hard wood 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc divided into square with rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc (size of members of shutters as specified in SSR Part –I section 8 Clause 8:24 (b) complete all as specified and directed. |
| 9 | S&F 30 mm thick Flush shutters, solid core construction, with Block board core and plywood face panels, commercial type on both sides. Make : Century Ply, Green Ply, Archid Ply or equivalent as approved by GE. |
| 10 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 11 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 12 | S & F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21 completed all specified and directed. |
| 13 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised completed all specified and directed. |
| 14 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and directed. |
| 15 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy completed all specified and directed. |
| 16 | S & F 75 mm long medium weight, cold rolled mild steel Butt hinges and fixed complete all specified and directed. |
| 17 | S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all specified and directed. |
| 18 | S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and directed. |
| 19 | Dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering complete all specified and directed. |
| 20 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based corrugated steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler including dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering as specified. |
| 21 | Taking down/Dismantling wrought iron or mild steel work of any description complete all specified and directed. |
| 22 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified |
| 23 | S&F three track powder coated Aluminium sliding window having two glass shutter and one gauge shutter frame made up 130 mm /41 mm 1.6 mm thick aluminium section & shutter made up 45 mm / 25 mm/1.3 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable aluminium handle and locking arrangment,making good etc as directed by engr in charge. |
| 24 | S&F powder coated anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified (minimum thickness of powder coating 50 micron). |
| 25 | S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws, necessary locking arrangement etc complete all as specifid power coating of any colour (thickness of power coating not less than 50 micron.) |
| 26 | S&F for powder coated anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,rubber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle (1 no), tower bolts as required complete all as specified (thick ness of powder coating not less than 50 micron) complete all specified and directed. |
| 27 | S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all specified and directed. |
| 28 | S & F 4 mm thick frosted glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all specified and directed. |
| 29 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. |
| 30 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 complete all specified and directed. |
| 31 | M & L preparing new or perviously untreated Steel and Iron surfaces of any description, over 10 CM width or girth and applying two coats of synthetic Enamel paint (First quality) orver a Red oxide Zinc chorme pimer, complete all as specified |
| 32 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as per approved drawing & direction of Engineer-in-Charge. |
| 34 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with miltli chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated).Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass. |
| 35 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all specified and directed. |
| 36 | S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.2x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed. |
| 37 | M & L for 4m thick Non Asbestos designed Cement E board as approved by GE fixed in ceiling as specified and directed. |
| 38 | S & F 25mm SS curtain rail with SS brackets fixed to walls complete all as specified and directed. |
| 39 | Removing complete existing treatment incl pcc bedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all specified and directed. |
| 40 | M&L for brushing neat cement slurry with 03 Kg of cement per Sqm complete all specified and directed. |
| 41 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately) complete all specified and directed. |
| 42 | M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate complete all as specifeid and directed. |
| 43 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top including taking down existing treatment complete all as specified and directed.(i) Applying one coat of cold bituminous primer 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces.(ii) APP based polymeric membrane 3mm thick, minimum weighing 3.5 Kg/sqm, reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction and sealing the joints with application of cold bitumen.(iii) Applying two coats of aluminum paint over the APP membrane complete all specified and directed. |
| 44 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all specified and directed. |
| 45 | M & L for plain cement concrete Type E2 1:5:10 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all specified and directed. |
| 46 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors complete all as specified and directed.NOTE: Water proofing compound will be measured separately complete all specified and directed. |
| 47 | M&L applying one coat of water proofing Dr. Fixit Pidifin 2K or Dr. Fixit 301 Pidicrete URP mixed with cement to create a robust elastomeric shield to sides and bottom of floors to sunken floors complete all specified and directed. |
| 48 | S&F Glazed ceramic coloured tiles in vertical surfaces 450x 300x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all specified and directed. |
| 49 | M&L Non - skid Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in adhesive compoundas per manufacturer's instructions and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. |
| 50 | Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc complete all specified and directed. |
| 51 | Material and labour for granite (of any type) tiles 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and 20mm thick cement screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 52 | S&F in repairs 10 Ltrs. Capacity PVC valveless, symphonic action flusing cistern low level slimline or equivalen make / model with all accessories. |
| 53 | Supply & Fix in repairs Vitreous EWC Wash down water closet (Pedestal Pattern)white with includig 'P' or 'S' traps. |
| 54 | S&F in repairs Vitreous China squatting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rest including 'P' or 'S' traps. (Excluding flushing cistern & flush pipe) complete all specified and directed. |
| 55 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand complete all specified and directed. |
| 56 | S & F PVC connection 15 mm bore 450 mm long complete all specified and directed. |
| 57 | Taking down rain water pipes inculding all fittings any size and pattern complete all specified and directed. |
| 58 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all specified and directed. |
| 59 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls complete all specified and directed. |
| 60 | S & F 110 mm bore PVC (SWR) bends of any radius complete all specified and directed. |
| 61 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all specified and directed. |
| 62 | S & F 110 mm bore PVC (SWR) Vent Cowl complete all specified and directed. |
| 63 | S & F 50 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all specified and directed. |
| 64 | M&L 75 mm bore PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all specified and directed. |
| 65 | M&L 75 mm bore for PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all specified and directed. |
| 66 | Supply & fix in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all specified and directed. |
| 67 | Supply and laying 20 mm dia CPVC pipes SDR 11 & plain/brass CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all specified and directed. |
| 68 | Supply and laying 25 mm dia CPVC pipes SDR 11 & plain/brass CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all specified and directed. |
| 69 | Supply and laying 32 mm dia CPVC pipes SDR 11 & plain/brass CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all specified and directed. |
| 70 | S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all specified and directed. |
| 71 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all specified and directed. |
| 72 | S & F in repairs 15 mm bore chromium plated two way bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all specified and directed. |
| 73 | S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all specified and directed. |
| 74 | S&F for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all in respect as specified. |
| 75 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all specified and directed. |
| 76 | Dismantling PVC/RCC water tank and removing to store exc 500 & not exc 1000 ltrs complete all specified and directed. |
| 77 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks 4 layered (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 78 | M&L two coat Damp proof paint in wall,ceiling for arresting leakage and seepage complete all as specified and directed by Engr-in-Charge , and as per manufacturer instructions including preparation of surface. Make - Asian Paints, Dr fixit, Berger, Sika or equivalent complete all specified and directed. |
| 79 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all specified and directed. |
| 80 | M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement complete all specified and directed. |
| 81 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all specified and directed. |
| 82 | Supply only Integral water proofing compound complete all specified and directed. |
| 83 | M&L rendering 5mm thick of cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth(without using extra cement.) complete all specified and directed. |
| 84 | M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick acrylic wall care putty complete all specified and directed. |
| 85 | M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick acrylic wall care putty complete all specified and directed. |
| 86 | Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick acrylic wall care putty. |
| 87 | M&L for preparation of wall surface incl for One coat water based premium acrylic smooth exterior emulsion i.e. Weathercoat Long Life 10 (of approved colour) with PU & silicon additives, excellent dirt pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algai properties in two coats @1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat of HS Seal-o-prime with Berger Pro spray 3.21 fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. |
| 88 | M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed. |
| 89 | M&L for Preparation old decorated plastered surfaces of wall and applying two coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed. |
| 90 | Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement including taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc and Material and labour for preparation of new plastered surfaces and preparation of newly plasterd surface and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over and including one coat of primer over newly plastered surfaces and 1mm thick acrylic wall care putty complete all as specified. |
| 91 | M&L for 15 mm thick rendering in CM 1:4 with and incl water proofing compound @2% by weight of cement including finishing the surface even and smooth without using extra cement, including taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc and M&L for two coat of cement base paint over new plastered surface including preparation of surface complete all as specified and directed. (WPC shall be measured and paid seperately) |
| 92 | M & L for preparing new surfaces of ceilings and applying two coats of white wash complete all specified and directed. |
| 93 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all specified and directed. Please Enable Macros to View BoQ information |
