|
| 1 | Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified. |
| 2 | Taking down chowkats with shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) |
| 3 | Taking down shutter of any description n exc 1.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge |
| 4 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site |
| 5 | Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and Refixing of shutters in same opening after resecuring or easing & adjusting, complete all as specified and directed by Engineer-in-Charge |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed . |
| 7 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 8 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 9 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 150 mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 nos. per leaf |
| 10 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed/gauge skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges with necessary full body threaded star headed counter sunk S.S screws including S&F wire cloth complete all as per direction of Engineer- In- Charge including supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf(f) Stainless Steel (304 Grade) (natural finish) wire cloth fixing as per manufacture |
| 11 | S&F in repair 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed. |
| 12 | S&F in repair 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed. |
| 13 | S&F in repair 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed. |
| 14 | S&F in repair 125 mm in size aluminium handles cast type anodized complete all as specified & directed. |
| 15 | S&F in repair mild steel sliding door bolt 300 mm long plate type stove enameled black with bright bolt not less than12mm dia. |
| 16 | S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge |
| 17 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed |
| 18 | S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed. |
| 19 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed. |
| 20 | S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed. |
| 21 | S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed by Engineer-in-Charge |
| 22 | M & L Second class hard wood (hollock) plain fillets of Sectional area exc 6 Sq cm but not exceeding 13 Sq. cm, square, rectangular or triangular in section, wrought, secured with head less nails or brads, complete all as specified |
| 23 | M & L Second class hard wood (hollock) plain fillets of Sectional area not exceeding 3 Sq. cm, square, rectangular or triangular in section, wrought, secured with head less nails or brads, complete all as specified |
| 24 | S&F 75 mm in size aluminium handles cast type anodized complete all as specified & directed. |
| 25 | S&F Hasp and staple, safety type 100 mm, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 26 | S&F 28-30 mm thick, prelaminated Block boards, grade 2 quality, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 27 | Hacking out old broken glass (any thickness, size quality or description) from wooden / steel / aluminium frame, including punching or drilling out old glazing pins/spring clips complete all as specified & directed. |
| 28 | S&F sheet glass 4 mm thick ordinary quality(plain/floated/frosted/tinted) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed. |
| 29 | S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted/tinted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed. |
| 30 | S & F 3 mm thick Figured glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified . |
| 31 | S&F 5mm thick looking mirror of selected quality glass of any size , mounted on 12mm thick commercial plywood incl all around moulding with paint and fixed to teak wood plugs with chromium plated brass screws and cup washers, complete all in repair as specied and directed |
| 32 | S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 33 | S&F MS square bar for window guard bars fixed indenpendently welded to ventilators and windows etc and similar article. |
| 34 | S&F steel ventlators with top hung shutters including box type hinges, steel peg stay complete |
| 35 | S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded (Glazed steel window) |
| 36 | S &F steel windows with side hung shutters including box type hinges , steel handle with fixing arrangement for wire gauge windows etc complete (wire gauge steel window) |
| 37 | M & L providing two coats of synthetic enamel paint over new surface and a coat of red oxide primer on steel surfaces including preparation of surface of any description not exceeding 10 cm width or girth all as specified . |
| 38 | Taking down aluminium door shutter , Refixing in the same opening after tightening of members ,refixing of glass panes and rubber bids inluding adjusting of old hydraulic door closer complete. |
| 39 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,incl dismantling u/s existing ones all complete as per architectural drawings and thedirections of Engineer-in-Charge |
| 40 | S&F aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings incl dismantling u/s existing windows complete all as specified and directed by Engineer-in-Charge |
| 41 | S& f aluminium powder coating of any color ( thickness of powder coating not less than 50 micron) frame for door,window and ventilators or similar wk with one or more rebate inc joining cleat for fixing in repair complete all as specified and directed by Engineer-in-Charge |
| 42 | S&F aluminium door shutters powder coating of any color ( thickness of powder coating not less than 50 micron), alumimnium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc incl dismantling u/s existing door complete all as specified.directed by Engineer - in - Charge. |
| 43 | S&F aluminium window and ventilator shutters or aluminium partition, powder coating of any colour (Thickness or powder coating not less than 50 micron),fixed type without sash bar, aluminium section weighing min 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. incl dismantling u/s existing ones complete all as specified |
| 44 | S&F aluminium window and ventilator shutters powder coating of any color ( thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing min 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws,aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl dismantling u/s existing ones complete all as specified |
| 45 | S& f anodised aluminium frame for door,window and ventilators,partition or similar wk with one or more rebate inc joining cleat for fixing in repair complete all as specified and directed by Engineer-in-Charge |
| 46 | S&F anodised aluminium door shutter , aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc incl dismantling u/s existing ones complete all as specified.directed by Engineer - in - Charge. |
| 47 | S&F anodised aluminium window and ventilator shutters or aluminium partition, ,fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. incl dismantling u/s existing ones complete all as specified |
| 48 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws,aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl dismantling u/s existing ones complete all as specified |
| 49 | S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge |
| 50 | S&F in repair MS louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti for adjusting the louvers fixed in Aluminium ventilators with screws etc complete all as specified and directed by Engineer-in-Charge |
| 51 | Supply and Fix aluminium sliding window push lock |
| 52 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 53 | S&F solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturers |
| 54 | S&F in repairs aluminium (die cast) body, door closer hydraulically regulated designation No. 3 , universal type , suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed. |
| 55 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, including making good existing floor after installation of floor spring. |
| 56 | S&F in repairs Aluminium Motrice lock 4 levers and 75mm size for doors /cupboards of any type, any description |
| 57 | S&F for 150mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring,fixed in floor. |
| 58 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. |
| 59 | M & L for rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement. |
| 60 | M & L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement. |
| 61 | M&L for two coat of cement base paint over a coat of alkali resistant cement primer on newly plastered surface including preparation of undecorated surface complete all as specified and as directed |
| 62 | M& L for two coat of oil bound distemper on new plasterd wall surfaces of walls paint over two coat thick wall care putty including necessary preparation of surfaces all as specified. |
| 63 | Complete removal of existing treatment and preparing old surface of steel of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as directed and specified.Make : Asian Paints/Berger/Nerolac |
| 64 | Complete removal of existing treatment of any type/description from external/internal/ceilings surfaces/walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed. |
| 65 | Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. |
| 66 | Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall/ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Internal Emulsion : Asian (APCOLITE PREMIUM EMULSION) / Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) . |
| 67 | Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using spray gun to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Exterior Emulsion : Asian (APEX) / Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL) . |
| 68 | Dismantling structural steel work including doors,gates but excluding framed truss etc. |
| 69 | S & F structural steel work rolled mild steel joist, channel,angle,or Tee sections, fixed independently conforming to Fe 410-W all as specified . |
| 70 | S & F framed work such as grills, cooler stand ,ladder grating and sun shed etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified . |
| 71 | S&F 25 mm dia SS drapery curtain rod with decorative end knobs complete with brackets and fixed to walls complete all as sp & directed . |
| 72 | Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices. |
| 73 | S&F glazed ceramic coloured tiles joint free 350x250x7mm/450x300x7mm square or rectanguler as on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick rendering in CM 1:4 |
| 74 | M&L 15-18mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and like in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including 15 mm thick screed bed /10 mm rendering in CM 1:4 as required |
| 75 | S&F 595x595mmx4mm thick false ceiling of Non esbestos fibre cement building boards (E Board) andincluding supply and fixing 'Tee\\" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer's instruction complete all as specified and directed Engineer-in-Charge |
| 76 | M & L in repair providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick one decorative lamination sheet consisting of carcass 18mm thick PVC Sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets SS screws etc.The panels shall be fabricated using adhesive and screws where ever required. all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as drawing or specification approved by Eng-in-Charge including dismantling u/s existing ones complete. |
| 77 | S&F Hollow PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site all as per specification complete all as specified and directed Engineer-in-Charge |
| 78 | M & L in repair cubboard with prelaminated Block board 18/19 mm thk interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 79 | S&F Magnetic catcher fixed in with nut,screw washer complete all as specified and directed by Eng-in Charge. |
| 80 | S & F 100mm extuded,brass handles,fabricated type polished for cabinet shutters complete all as specified and directed. |
| 81 | S & F for solid PVC frame (single revated) of size 60mm x 30mm made out of solid pvc foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK Screws complete all as specified and directed by Eng-in -charge. |
| 82 | S & F Continuous (piano) hinges, brass, bright finish or electro galvanised all as specified. |
| 83 | M & L for welding in repairs ex 2.5 cm but not exc 5cm in length complete all as specified and directed by Eng-in-charge. |
| 84 | Dismantling Wall lining& Ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets any thickness,any material including cover fillets and frame work etc complete all as specified and directed by Engineer-in-Charge |
| 85 | M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Eng-in-charge. |
| 86 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Eng-in-charge. |
| 87 | S & F 595x595mmx6-8mm thick Gypsum board laminated with PVC Sheet as in false ceiling including supply and fixing 'Tee\\" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer's instruction complete all as specified and directed Engineer-in-Charge |
| 88 | Supply & fixing factory made UPVC window or ventilator side hung/top hung (glazed and gauge both) made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) including all fittings like hinges, tower blot, peg stay, locking arrangement etc., making arrangement for fixing of hardware all as per manufacture instruction and refer Drg No BTD-890/R complete all as specified and directed.Note : The unit rate quoted by contractor includes cost of glass & wire mesh (4 mm thick sheet glass ordinary quality plain/tinted for window and 4mm thick figured glass pin head type for ventilator, wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm) and includes all other connected accessories. Net Opening will be measured for payment purpose.. Provision of all other items as shown on Drgs & Cutting holes of suitable depth in wall for inserting lugs etc including making good dismantled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate and cement mortar (1:3) shall be demand to be include. |
| 89 | Supply & fixing aluminium Powder coated grill of approved design/pattern, with approved standard section and fixed to the window frames with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
