|
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 sqm each & removing to store all as specified and directed. |
| 2 | Taking down chowkats with shutter (without taking off shutters from the frame) exc 1.5 sq.m but n.exc 4 Sqm each & removing to store all as specified and directed. |
| 3 | Refixing of shutter in other opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge. |
| 4 | Taking down shutter of any description exc 1 sqm and n exc 2.00 sqm each and removing to store yard all as specified and directed by Engineer-in-Charge. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 6 | Ditto as per item no. 6 above but of frame size 65 x 100 mm. |
| 7 | Ditto as per item no. 6 above but of frame size 65 x 125 mm. |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 9 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 10 | Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton door shutter open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, mesh etc.; and comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. (Note : Stainless steel butt hinges shall be deemed to be inclusive in unit rate quoted of this item.) |
| 11 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 12 | Material and labour for providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer, including all required fixing material such as SS brackets, screws, adhesive etc., including necessary demolition/taking down of existing cabinet, shelves, frame, fittings and making good disturbed surfaces complete all as specified and as directed by Engineer-in-charge.Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves) shall be measured in sqm for payment.(ii) Magnetic catcher, handles, continuous Piano hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ.(iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 13 | M&L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed. |
| 14 | M&L 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. |
| 15 | S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge. |
| 16 | S&F Aluminium handle cast type anodized 150 mm long all as specified and directed by Engineer-in-Charge. |
| 17 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge. |
| 18 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 200 mm long all as specified and directed by Engineer-in-Charge. |
| 19 | S&F 100 mm long stainless steel butt hinges for doors including necessary SS screws complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed. |
| 21 | S&F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer - in-Charge. |
| 22 | S&F continous (Piano)type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed. |
| 23 | S&F in repair 100 mm size hasp and staple,safety type, stainless steel bright finish ,including bolt to hinge plate and fixed with screws,complete all as directed. |
| 24 | S&F factory made prefabricated pressed steel door frame made out of mild steel 1.25 mm thick girth of frame 185 mm including necessary MS rawl plug/bolts and fixing 75 mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with locking arrangement using mild steel mortice lock 4 levers with 2 Nos of keys of size 100 mm (Make Godrej/Harrison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8mm dia not exc 1000mm long fixed to mortice lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not visible from front) and hammer tone paint on exterior surface (visible from front) complete as per Godrej pattern all as specified and directed by Engr-in-charge drawing complete all as specified and directed by Engineer-in-charge. (Note: Girth of frame will be measured seperately under same item) |
| 25 | M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed by Engineer - in - Charge. |
| 26 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 27 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 28 | S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F drapery curtain rod, mild steel, rubber moulded 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge . |
| 30 | S&F drapery curtain rod, stainless steel, 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge . |
| 31 | Hacking out old broken glass (any size, thickness, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified & directed by Engineer -in-charge. |
| 32 | S&F in 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and directed by Engineer - in-Charge. |
| 33 | S&F 3 mm thick figured glass pin headed and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in-Charge. |
| 34 | Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles all as specified.& directed by Engineer -in-charge.. |
| 35 | M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick rendering/screed bed in CM 1:4 complete all as specified and as directed. |
| 36 | S&F anodized aluminium frame for doors, windows, ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified |
| 37 | S&F powder coated (minimum thickness of powder coating 50 micron) anodized aluminium frame for doors, windows, ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified |
| 38 | S&F anodised aluminium door shutter, aluminium section wt 0.55 kg / mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminium snap beading screws etc. |
| 39 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutter, aluminium section wt 0.55 kg / mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminium snap beading screws etc. |
| 40 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window/ventilator shutter, side hung type without sash bar, aluminium section wt 0.55 kg / mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fitting such as peg stays 150 mm long (1 No.) hinges type B-21 100mm long (2 Nos. )suitable handle (1 No) complete allas specified . |
| 41 | S&F powder coated aluminum anodized grill diamond shape 100mm x 100mm aperture of 6 mm dia round bars including necessary joining cleats, clips anodised complete all as specified. |
| 42 | M&L sheet glass selected quality plain 4mm thickness fixed in alum door/window shutter cut to required size and fixed with PVC/Neopane gasket etc. Complete all as as specified and directed. (Aluminium snap beading shall be paid separately) |
| 43 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 44 | Taking down and refixing of alum window shutters of any size in same opening incl repairs /replacement of rubber packing, glass, glazing clips & aluminium section etc (The item glass,glazing clips & alum section will be measured seperately) |
| 45 | Taking down aluminium door shutter,refixing of shutters of any size in same opening incl repairs / replacement of rubber packing, glass, glazing clips & aluminium section etc after tightening of members, adjusting of door closure etc. complete all as specified and directed. (The item glass, glazing clips & alum section will be measured seperately) |
| 46 | S&F in repair stainless steel towel rack, mirror finish, polished, rust proof, foldable with multi purpose hooks (min. weight 1.50 Kg) complete all as specified and directed. Make :- Cat part no. AMZ_EXL_567 of Hindware or equivalent as approved by Garrison Engineer. Please Enable Macros to View BoQ information |
