Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface dressing n. exc 15 cm deep in any type of soil, complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc. n.exc 10 sqm on plan and getting out in any type of soil, complete all as specified and directed. |
| 3 | M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregate) in foundation, filling, mass concrete, complete all as specified and directed. |
| 4 | M&L for Reinforced cement concrete (design mix) M-25 using 20mm crushed stone aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 5 | M&L for RCC M-25 (design mix) using 20mm crushed stone aggregates as in columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 6 | M&L for reinforced cement concrete M-25 (design mix) using 20mm crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over1.5m span all as specified. |
| 7 | M&L for Reinforced cement concrete M-25 (design mix) using 20mm crushed stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 8 | M&L for Reinforced cement concrete M-25 (design mix) using 20mm crushed stone aggregates for chhajja all as specified. |
| 9 | Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed. |
| 10 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 11 | M&L for ATT by treating the bottom and sides of excavation at the rate of 5 litres of emulsion per Sqm of surface area, complete all as specified and directed. |
| 12 | Excavation over areas n exe 1.5 m deep and getting out in any type of soil complete all as spd and dircted |
| 13 | M&L for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 14 | M&L for ATT by treating the top surface of filled earth at the rate of 5 litres emulsion per sqm of surface area, complete all as specified and directed. |
| 15 | M&L for 75 mm thick PCC 1:4:8 as in sub base of floors etc. and finishing the surface even and fair, complete all as specified and directed. |
| 16 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in floors etc. and finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 17 | M&L for 75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregates as in plinth protection in panels, including finishing the surfaces even and smooth, complete all as specified & directed. |
| 18 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide |
| 19 | Formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed. |
| 20 | Formwork to sides of square or rectangular pillars, posts, struts, columns etc., complete all as specified and directed. |
| 21 | Formwork to sides and soffits of floor or roof beams,, splays between floor and beams etc., complete all as specified and directed. |
| 22 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 23 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 24 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6, complete all as specified and directed. |
| 25 | M&L TMT bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc. and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed. |
| 26 | M&L TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including bending, cranking etc. and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed. |
| 27 | S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-1 back of chowkhats complete all as specified and directed. |
| 28 | S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-1 back of chowkhats complete all as specified and directed. |
| 29 | S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkhats complete all as specified and directed. |
| 30 | S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc. with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc. sizes of members as per clause 8.20(a) of SSR Part-I complete all as specified and directed. |
| 31 | S&F Solid PVC door frame (Single rebated) of size 60mmx30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screw complete all as specified and shown on drawing.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for a long life. |
| 32 | S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 33 | S&F 150mm long SS Stainless steel barrel tower bolts of extruded section ISI marked, complete all as specified and directed. |
| 34 | S&F 150mm extruded SS Stainless steel handle fabricated anodized ISI marked, complete all as specified and directed. |
| 35 | S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel complete all as specified and directed including necessary welding if required . |
| 36 | S&F 3 ways sliding anodized aluminium glazed window shutter with frame & with following specifications all as specified & directed:-(a) window frame 3 track of size 95mmx25mmx1.5mm thick(b) Stiles and rails of size 35mmx25mmx1.5mm(c) 35mmx35mmx1.5mm T section mullion(d) PVC gasket with 4mm thick tinted glass, incl aluminium handles with necessary locking arrangement for 02 Nos glazed shutter.(e) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples incl aluminium handles with necessary locking arrangement for 01 Nos gauzed shutter.Note:- Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 37 | S&F ventillators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed.(a) SP 20048(b) Glazing clips 19352 |
| 38 | S&F steel window/ventilator with tubular frame factory made of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter both for glazed and wire gauge with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg No CEPZ/TD-245/01 and 246/02 sheet ½ & 2/2 (excluding glass & wire guage). |
| 39 | S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed. |
| 40 | S&F Galvanised mild steel wire cloth 0.46mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples/ tinned tacks complete all as specified and directed. |
| 41 | M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 42 | M&L for preparation of New wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 43 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed. |
| 44 | S&F prelaminated 18 mm thick lead free factory made 100 % solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30 % wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 Sqm should be 11 Kg(+- 5%) manufactured by ISO 9001-2015 certified company. The sheet should be 100 % water proof, termite proof ,fire retardant, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness, complete including all fittings like handle, piano hinges, normal hinges, magnetic catcher, beading etc. , complete all as specified and directed. |
| 45 | S&F Continuous (Piano) hinges, mild steel , bright finish or electrogalvanized with wide of flaps 30mm, complete all as specified and directed. |
| 46 | S&F for hasp and staple aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate and fixed with screw complete, |
| 47 | S & F in repair 25mm outer dia stainless steel bright finished, fancy type decorative drapery rod of thickness 20 gauge fixed to wall with screws, PVC gully including all necessary fixing arrangement complete all as specified |
| 48 | S&F stainless steel bright finished ,fancy type decorative brackets fixed with PVC plug/gutty & screws etc complete all as specified . |
| 49 | S&F stainless steel bright finished ,fancy type decorative end caps fixed complete all as specified . |
| 50 | M&L for rendering 15 mm thick in cm 1:4 with using water proofing compound on faces of block masonry /brick work or concrete surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed.Note: WPC shall be measured and paid separately under respective item. |
| 51 | M&L for Rendering 10mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 52 | M&L for Rendering 10 mm thick plaster RCC Roof slab, facia, ceiling, chajjas fair finished cement mortar 1:3,complete all as specified and directed. |
| 53 | M&L for Rendering 5 mm thick plaster RCC Roof slab, facia, ceiling, chajjas fair finished cement mortar 1:3,complete all as specified and directed. |
| 54 | M&L for preparation of surfaces by leveling/edging of the disturbed planes/edges of New plastered surfaces of wall by using wall care putty of avg 1 mm thick on vertical surfaces to true vertical and horizontal lines of bricks/concrete walls finish to even and smooth with two layers of acreylic wall care putty complete all as specified and as directed |
| 55 | M&L for preparation of concrete surface & applying two coats of oil bound distemper over one coat of primer as on walls surfaces complete all as specified and directed |
| 56 | M&L for preparation of concrete surface & applying two coats of oil bound distemper over one coat of primer as on ceiling surfaces complete all as specified and directed |
| 57 | M&L for preparation of new plastered surfaces of wall including cornices plasters and applying two coat of oil bound distemper over a coat of primer on wall over 1 mm thick wall care putty complete all as specified & directed by Engr-in-Charge. |
| 58 | Preparation of new plastered surfaces of walls and M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004 alkali and fungal resistance, dust resistance, water repellant, crack-bridging, weather proof 1st quality exterior paint of approved camouflange pattern with required shades (Company Depot Tinted) with silicon additives @ 1.43 L/10 Sqm and including priming coat of exterior primer applied @ 0.90L/10 Sqm and repairing patches with putty and scaffolding at any height complete all as specified and directed by Engr-in-Charge. Note : - Tint/ shade shall be approved by Engr-in-Charge. |
| 59 | M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster). |
| 60 | Supply only integral water proofing compound, complete all as specified and directed. |
| 61 | M&L PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in padding over roof slab for providing proper slope 1:40 and approx. thickness 75mm or less and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 62 | M&L for machine cut Kota stone, stone slab flooring 20-25mm thick over screed bed 20mm thick in cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and granite polishing, complete all as specified and directed. |
| 63 | All as per serial item No. 62 here-in-above but in vertical/dado complete all as spd and directed. |
| 64 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 65 | M&L for providing glazed ceramic coloured wall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 66 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 67 | All as per srl iten No 66 above but in vertical/dado complete all as spd and directed. |
| 68 | S&F for vitreous china wash down water closet (pedestal pattern) white colour including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc. complete all as specified and directed. |
| 69 | S&F for 10 liters PVC valveless flushing cistern (white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed. |
| 70 | S&F for Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe. |
| 71 | S&F vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed. |
| 72 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 73 | Rounding to edges of stone slabs, one edge, such as in steps, cooking platform and other similar situation, complete all as specified and directed. |
| 74 | S&F bib taps, long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed. |
| 75 | S&F 15mm bore Angle valve fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 76 | S&F stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed. |
| 77 | S&F 15mm bore stop valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe complete all as specified and directed. |
| 78 | S&F Brass Chromium Plated Fancy type Swan Neck wash hand Basin Mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed |
| 79 | S&F Brass Chromium Plated wall mixture valve cast copper alloy fancy type for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 80 | S&F brass chromium plated overhead shower rose 125mm size with 225mm arm with swivel joints fixed including fixing to steel pipe or union all as specified. |
| 81 | S&F of UPVC underground drawings pipe (UDS) type 'B' 160mm dia with wall thickness 4mm (min) and pressured 4 KN /Mtr Sq jointed in cement solvent complete including providing 150 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for 160mm bore pipes incl packing under and haunching against the sides of pipes after they are laid tested including necessary excavation in trenches complete all as specified and directed . |
| 82 | Cutting into existing manholes for connecting new drains, making good to pipe and making good of broken manhole complete all as specified and directed. |
| 83 | S&F beveled edge fancy mirror 5.5mm thick glass of size 600x450mm of selected quality with four holes and catch nut complete design/shape will be approved by Engineer-in-Charge complete all as specified and directed. |
| 84 | S&F brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges, complete all as specified and directed. |
| 85 | S&F towel ring of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( min wt 90 gms) complete all as specified and directed. |
| 86 | S&F 5.5mm thick glass shelf 12cm wide with cp bracket guard and 60cm long CP railing including chromium plated brass screws and wooden/plastic cleats complete all as specified. |
| 87 | S&F Corner glass shelf assembly consisting of 5mm thick sheet glass shelf 30cm wide with chromium plated bracket guard and railing complete all as specified and directed. |
| 88 | S&F 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 89 | S&F grating square 100x 100 mm size of stain less steel as in repair, complete all as specified and directed. |
| 90 | M&L for precast cover slab 1:2:4 type B-1 as in Slab supported on wall, beams, column in floor , landings, balconies, canopies, deck slabs and in the shelves, cover slab complete all as specified and directed. |
| 91 | S&F mild steel, chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. |
| 92 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts, complete all as specified and directed. |
| 93 | M&L 20mm dia Gun metal globe or gate valve with iron wheeled head, screwed both ends for iron and fixed in repairs complete all as specified and directed. |
| 94 | M&L sliding door bolt 250mm thick Stainless steel ISI Marked with hasp & staple bolt type and fixing clips of sheets SS section and fixing bolts and sliding bolts or extruded section all as specified. |
| 95 | M&L cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3, cutting not exceeding 10cm girth complete all as specified and directed. |
| 96 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed, complete to walls all as specified. |
| 97 | S&F 20mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete to walls all as specified. |
| 98 | Supply and fix Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, cattle trap and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed. |
| 99 | S&F 32mm bore corrugated PVC waste pipe omplete all as spd and directed. |
| 100 | M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 101 | S&F floor door stopper of overall length of cover plate 140mm or 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 102 | S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. |
| 103 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 104 | S&F 110mm bore pipes, PVC (SWR) bends any radius fitting of PVC (SWR) pipes, complete all as specified and directed. |
| 105 | S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socket, in any length with rubber ring joints, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 106 | S&F for 75mm bore pipes, PVC (SWR) bends any radius fitting of PVC (SWR) pipes complete all as specified and directed. |
| 107 | S&F for 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 108 | S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed. |
| 109 | S&F 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required, complete all as specified and directed. |
| 110 | S & F for peg set of 5 Pin Stainless steel Grade, AISI 304, fancy type, superior quality with fixing arrangement complete all as specified & directed. |
| 111 | S & F snake guard aluminium/GI strip complete all as specification and directed. |
| 112 | Supply & fixing of CP health faucet with ABS body, 1.00mtr flexible tube &hook fixed with and incl CP screws complete all as specified and directed. |
| 113 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 114 | Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 115 | M&L for 75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregates as in floors, including finishing the surfaces even and fair, complete all as specified & directed. |
| 116 | M&L Machine pressed precast concrete inter locking paver block any shape with grey cement and pigment size conforming to IS 15658-2006 of 60mm thickness,M-35 Grade laid over sand cushioning. Note :- sand shall be measured and paid separately. |
| 117 | M&L factory made hydraulically pressed PCC kerb stone of size 300x300x150mm fixed in cement mortar 1:4 complete all as spd and directed. |
| 118 | M&L for cement concrete PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete, complete all as specified and directed. |
| 119 | M&L for sand filling for under floors, complete all as specified and directed. |
| 120 | M&L for PCC 1:3:6 Type C-1, using 20 mm graded crushed stone aggregate as in surface channel and drains complete all as specified. |
| 121 | M&L for RCC 150mm dia NP-2 pipes with collar complete all as specified & directed. |
| 122 | S&F 25mm bore GI tubing medium grade galvanized ISI marked with all fittings, laid in trenches or ground/ in walls, complete all as specified and directed. |
| 123 | S&F 50mm bore GI tubing medium grade galvanized ISI marked with all fittings, laid in trenches or ground/ in walls, complete all as specified and directed. |
| 124 | M&L for 100mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregates as in bed for pipes incl packing under and haunching against the sides of pipes after they are laid tested complete all as specified & directed. |
| 125 | M&L for septic tank for 10 usres designated to carry sewage and sludge water, including excavation in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc, complete all as specified, shown on drawings and directed. |
| 126 | M & L for soakage wells 1.2m x 3.0 m in any type of soil including excavation foundation on PCC 1:3:6 walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SRFC cover,interconnecting pipes of RCC/DWC complete filled with brick bats complete all as spd, shown in drawings and directed. |
| 127 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. |
| 128 | M&L for Rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces including formwork at any height complete all as specified and directed, complete all as specified and directed |
| 129 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, benching, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed |
| 130 | M & L for modular point wiring for one light controlled by one switch 5 Amp, SP, one way 240 volts with 1.5 sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit not less than 1.8 mm thick (ISI marked) with all accessories including suitable modular plate (Inner + Outer) and modular metallic boxes of suitable sizes including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multistranded cable for continuous earth conductor connected to common earth dolly, complete all as specified & directed for the following :- Note:- Proper colour coding is to be followed as per IS Specification. |
| 131 | All as per item No. 130 here-in-above but for one fan point controlled by one piano switch all as specified and as directed. |
| 132 | All as per ser item No. 130 here-in-above but for one 3 pin socket outlet 5 Amp Same board. |
| 133 | M&L for Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 134 | M&L for Modular socket 2 in 1 ,6 amps 2/3 pin Combined 2 Module , 240 volts. with polycarbonate body. |
| 135 | Supply and fix Ceiling rose surface bakelite three terminals 240 volts complete, all as specified. |
| 136 | Supply and fixing MCB Protected Socket With sheet steel Enclosure single pole 25 Amp with 3 pin plug top for AC connection from Socket point to stabilizer complete all as specified and as directed. |
| 137 | Supply and fix of Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , all as specified. |
| 138 | Supply and fixing of LED Lamp 9/10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer - in - Charge. |
| 139 | Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 140 | S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 141 | Supply and fixing of LED lights fitting 1x 20W,minimum 3.5 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete. |
| 142 | Supply and fixing of 5 star rated BLDC ( Brush less direct current motor ) ceiling fan 230 volts, single phase of 1200 mm Sweep with regulator double ball bearing type with minimum air delivery 210 CFM & service value shall not less than 6.0 B.E.E including blade, down rod and canopy cover white colour etc. and including connecting 3 core flexible copper conductor cable complete all as specified and directed by Engr-in-Charge |
| 143 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and as directed.. |
| 144 | S & F High performance IP66 LED Street light 20 watt, housing made of die-cast aluminium, with street optic lens, with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5 sqmm from ceiling rose, and 20W LED light etc. drawn through and including 32mm bore GI light grade protection pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and as directed complete all as specified and as directed. |
| 145 | Supply and installing of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with G I hexagonal adopters/Nuts on the both sides for inlet ( cold water supply) & outlet ( hot water supply) and including provision of wall mounting arrangement and mounding wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and directed by Engr-in-Charge . |
| 146 | S & F of SPN 8 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed |
| 147 | S&F of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 148 | S&F of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 149 | M&L for point wiring using approved colour coading as per IS with FRLSH PVC insulated copper conductor cables with copper cable 1.5 Sqmm (nominal area) single core insulated and unsheathed stranded cable 1100 Volts grade and including (ERW) stove enamelled steel conduit heavy duty ISI marked and unsheathed copper conductor 1.5 Sqmm nominal area as earth wire as earth continuity conductor upto any length from maint distribution board/switch board to fitting complete all as specified and directed by Engineer-in-Charge for the following :- |
| 150 | One light point or one fan point or bell point controlled by one switch SP one way 230 Volts, complete all as specified and directed. |
| 151 | S&F for LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all as specified and directed. |
| 152 | S&F sub main wiring with 2 runs of single core 4 Sqmm PVC insulated copper conductor cable, unsheathed LT 1100 Volts grade drawn through and including stove enamelled steel conduit of size 20mm dia and accessories fixed on wall/roof including one run of 4.0 Sqmm of PVC insulated copper cable for earth continuity all as specified and directed. |
| 153 | S&F flame proof/weather proof switch 16A, 250 V in LM6 single pole suitable for installation in hazardous as per IS-2147/62 aluminium alloy/cast iron neoprane gasket degree of protection IP 65 certified by CMRI all as specified and directed. |
| 154 | S&F flame proof/weather proof switch socket and plug combined in LM6 cable termination box 25A 240V V 2 Pin and earth plug fully interlocked suitable for installation in hazardous as per IS-2147/62 aluminium alloy/cast iron neoprane gasket degree of protection IP 65 certified by CMRI all as specified and directed. |
| 155 | S&F flame proof/weather proof DB SPN 415 Volts 4 Way with busbar in cast aluminium LM-6 enclosure operated externally spring type knob complete with M-25 cable entry to suit incoming cable and 2 Nos M-20 cable entries for outgoing cable from bottom with cable glands suitable for hazardous area and confirming to IS-2147/62 neoprene gasket degree of protection IP 65 including flame proof MCB & MCCB as under all specified and directed.(a) MCCB SPN 32 Amp - 01 No(b) MCB SP 6-32 Amps - 02 Nos |
| 156 | M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc. including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified and directed. Note : Earthing filling will be done with vogisumble soil (i.e. tree from stone & gravels). |
| 157 | M&L for 25mm dia Gun metal globe or gate valve with iron wheeled head, screwed both ends for iron and fixed complete all as specified and directed. |
| 158 | M&L for cutting existing GI/CI pipe line of size 40/25 mm dia pipe making new connection for GI pipe including short pieces , inserting tees, bends ,sockets, union etc. with existing water line all as specified by Engr-in-charge. |
| 159 | Supply and laying of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross-sectional area 16 Sqmm 4 Core complete all as specified and directed. |
| 160 | Supply and laying of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross-sectional area 16 Sqmm 2 Core complete all as specified and directed. |
| 161 | Supply and laying of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross-sectional area 50 Sqmm 3.5 Core complete all as specified and directed. |
| 162 | M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified and directed. Note: Punned thickness of sand shall be measured. |
| 163 | Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge |
| 164 | M&L for point wiring with PVC insulated fire retardant stranded copper conductor cable of 1.5 sqmm in PVC concealed conduit heavy duty and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc. ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and drawing 1.5 sqmm PVC insulated fire retardant stranded copper conductor cable as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed by Engr-in-Charge for the following:- (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note: In ceiling portion surface conduit wiring shall be carried out. |
| 165 | One light point or one fan point or bell point controlled by one switch SP one way 230 Volts, complete all as specified and directed. |
| 166 | One 3 pin socket out let 5/6 Amps on same board, complete all as specified and directed. |
| 167 | One socket out let 5/6 Amps on Independent board, complete all as specified and directed. |
| 168 | 15/16 Amps socket outlet independent with 2.5 sqmm copper conductor, complete all as specified and directed. |
| 169 | All as per item No 163 here-in-above but using 4.00 Sqmm (nominal area) multistranded copper conductor cable for geyser sheet metal plug socket outlet/metal plug top including 4.00 Sqmm size FRLSH PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for geyser on independent point complete all as specified and directed. |
| 170 | M&L for switch Piano flush type single pole one way 5/6 Amp , complete all as specified and directed. |
| 171 | M&L for switch, socket combination 2 in 1 , 3 pin, 5 and 15 Amp flush type all as specified and directed. |
| 172 | M&L for switch, socket combination 3 pin, 5 Amp flush type, complete all as specified and directed. |
| 173 | M&L for socket outlet 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed. |
| 174 | Supply, installing, testing and commissioning of LT feeder pillar box factory made cubicle outdoor type, fabricated out of 3.00 mm thick CRCA sheet floor mounted with angle iron base frame made of 40 x 40 x 6mm , 50 cm height, floor mounted duly bolts and nuts grouted, dust and vermine proof, suitable for voltage 415 V 3 Phase 4 wire ,Square copper bus bar Chamber 320 Amp Capacity weather proof, with IP-54 protection, with separate hinge door for each compartment for incoming and outgoing MCCB etc with locking arrangement, with back door openable (Screwed), legs grouted in PCC complete including painting with two coats of epoxy powder paint over a coat of primer complete including supply fixing and making provision of the following :- (a) MCCB 4 pole 415 volts 3 phase 200 Amp 25 KA -01 No (f) LED Indicator RYB -01 Set ( Set of three). Note: The panel shall be as per CPRI certificate. |
| 175 | Material and labour for earthing with steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, GI medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing. |
| 176 | Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
