|
| 1 | Demolition of brick work or stone/boulder masonry, laid built in cement mortor complete all as specified and directed. |
| 2 | Material and labour precast cement concrete solid block type B1 1:2:4 (using 20mm graded stone aggregate) exc 10cm in width and setting in cement morter 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone wall/ceiling surfaces etc including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed. |
| 4 | Material and labour rendering 15mm thick on fair faces wall of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | Material and labour for 5 mm thick rendering in cement mortar 1:4, on fair faces of Ceiling/ concrete surfaces complete all as specified and directed. |
| 6 | Material and labour for 10mm thick cement mortar plaster on brick wall in concrete surface in CM 1:6 finished even and smooth wihout using extra cement, complete all as specified and directed. |
| 7 | Material and labour for preparation of new plastered surfaces of walls and applying two coat of antifungal weather proof paint of required shade over a coat of primer using modern tools, and spray technique complete all as specified and directed. |
| 8 | Material and labour preparation new surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer using mordern tools, and spray technique complete all as specified and directed. |
| 9 | Material and labour preparation new surfaces of ceiling and applying two coat of distemper white or tinted over a coat of primer using mordern tools, and spray technique complete all as specified and directed. |
| 10 | Material and labour for complete removal of existing treatment by mechanical jet water cleaning /scrubbing machine with steel brush and applying two coat of antifungal weather proof paint of required shade over a coat of primer using modern tools, and spray technique complete all as specified to entire satisfaction of engr in charge and complete all as specified and directed. |
| 11 | Material and labour for preparing old painted surfaces of walls by brushing/rubbing down and applying one coat of antifungal paint on old decorated surfaces on walls including cornices etc complete all as specified and directed. |
| 12 | Material and labour for preparing surfaces plastered or unplastered by washing,brooming down or wire brushing and applying one coat of oil emulsion distemper on old decorated surfaces on walls including cornices etc complete all as specified and directed. |
| 13 | Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of distemper oil emulsion over a coat of primer through authorised company applicator using mordern tools, and spray technique complete all as specified and directed. |
| 14 | Material and labour preparation of new steel surfaces and applying two coats of synthetic enamal paint over a coat of red oxide complete all as specified and directed. |
| 15 | Material and labour for preparation and applying of one coat of synthetic enamel painting on old steel surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed. |
| 16 | Taking down chowkat with shutters (without taking off shutters from the frame) n.exc 1.5 sqm complete all as specified and directed. |
| 17 | Taking down chowkat with shutters (without taking off shutters from the frame) exc 1.5 sqm but n. exc 4.0 sqm complete all as specified and directed. |
| 18 | Supply and fix powder coated aluminium frame for door,windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 19 | Supply and fix powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) , hinges type B-21 100mm long(2 No) suitable handle (1 No) complete all as specified and directed. |
| 20 | Supply and fix powder coated( minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges(150mm size-3 nos), anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 21 | Material and labour veneered decorative plywood 9mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame complete all as specified and directed. |
| 22 | Supply and fix in repair mortize lock brass type of size 75mm 4 levers vertical type,complete all as specified and directed. |
| 23 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips etc. complete all as specified and directed. |
| 24 | Supply and fix in repairs 4mm thick oridinary glass pane, not exec 0.5 sqm each pane, glazing with oil putty complete all as specified and directed. |
| 25 | Supply and fix sheet glass, ordinary quality 4.8 mm thick and glazing with alu bedding/ oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 26 | Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 27 | Dismantling of wall and ceiling boards( fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets ccomplete all as specified and directed. |
| 28 | Supply and fix anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605 x 605 mm including hanging with mild steel 2mm dia wire in suitable length complete all as specified and directed. |
| 29 | Providing and fixing gypsum board 600mmX600mmX12mm thick in ceiling with screw as per manufacturers instructions complete all as specified and directed. |
| 30 | Dismantling floor, hearth or wall tiling including cement mortor bedding complete all as specified and directed. |
| 31 | Material and labour for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in flooring including finishing cement concrete rough surface without using extra cement, complete all as specified and directed. |
| 32 | Material and labour coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 33 | Material and labour coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 34 | Supply and fix glazed ceramic coloured tiles 300x250x7mm thick or 450/350/7mm thick .in dado incl 10mm thick back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specified and directed. |
| 35 | Material and labour for vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of mortar 1:6 for layig floor finish complete all as specified and as directed |
| 36 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickeness(below or above ground level) complete all as specified and directed. |
| 37 | Material and labour 75 mm thick cement concrete Type C2 1:3:6 (40 mm graded aggre-gate) as in plinth protection / sub-floors, sub-bases, floors and paving, etc. complete all as specified and directed. |
| 38 | Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified and directed. |
| 39 | Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 40 | Supply and fix prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering, fixed with self tapping screws complete all as specified and directed. |
| 41 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 42 | Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W(Gde-E-250) Quality 'A' complete all as specified and directed. |
| 43 | Material and labour for machine cut kota stone slab flooring 20-25mm thick, screed bed or bedding layer of 20mm thick cement morter 1:6 laid and jointed with gray cement slurry mixed wirh pigment to match the shade of the slab including rubbing and polishing etc.complete all as specified and directed. |
| 44 | Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M. S square tube, supplying & fixing in opening as per specification & drawing as mentioned in sectio 8 of SSR Part- II 2010 complete all as specified and directed. |
| 45 | Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back facesupplying & fixing in frame at site as per specification & drawing as mentioned in sectio 8 of SSR Part II 2010 complete all as specified and directed. |
| 46 | Supply and fix in repair aluminium anodised, barrel tower bolts of extruded section and fixed of size 150mm complete all as specified and directed. |
| 47 | Supply and fix in repair aluminium anodised, barrel tower bolts of extruded section and fixed of size 100 mm complete all as specified and directed. |
| 48 | Supply and fix in repair butt hinges, medium weight, cold rolled mild steel 100mm size and fixed complete all as specified and directed. |
| 49 | Supply and fix in repair aluminium alloy, anodised, sliding door bolt of size 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 50 | Supply and fix in repair extruded aluminium alloy handles, fabricated 125mm size and fixed complete all as specified and directed. |
| 51 | Supply and fix in repairs vitreous china wash basin white flat back size 580 x 450 mm excluding taps, but including cutting for and pinning in ends of brackets, waste pipe and brackets complete all as specified and directed. |
| 52 | Supply and fix in repairs vitreous China wash down water closet pan (Pedestal pattern) white including connection to drain and to flushing pipe,plastic water closet seat cover with clamp complete all as specified and directed. |
| 53 | Supply and fix in repair PVC low level flushing cistern symphonic action type, low level white 10 litres capacity with ISI mark including inlet ball valve float, handle and brackets and connection to pipes etc. complete all as specified and directed. |
| 54 | Supply and fix in repair stailess steel grating 100 mm dia in floor complete all as specified and directed. |
| 55 | Supply and fix in repair CP Bib taps, cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube in repairs complete all as specified and directed. |
| 56 | Supply and fix in repairs concealed stop cock regular body, quarter turn with flange Chromium plated fancy type of size 15mm complete all as specified and directed. |
| 57 | Supply and fixin repair cast copper alloy chromium plated fancy type pillar tap 15mm dia fixed in repairs complete all as specified and directed. |
| 58 | Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm long complete all as specified and directed. |
| 59 | Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 60 | Supply and fix in repair PVC connection 15mm with PTMT nuts of length 450mm long and taking down old one complete all as specified and directed. |
| 61 | Supply and fix in repairs CP shower rose fancy type 125mm size complete all as specified and directed. |
| 62 | Supply and fix in repair PVC health faucet with 1 meter flexible tube including necessary fitings complete all as specified and directed. |
| 63 | Supply and fix in repairs ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 64 | Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends on CPVC pipe incl necessry fittings of size 20mm bore dia complete all as specified and directed. |
| 65 | Taking up or down 15mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed. |
| 66 | Supply and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 67 | Taking up or down 20mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed. |
| 68 | Supply and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 69 | Dismantling water tanks exc 250 ltrs capacity & n exc 500 ltrs capacity and removing from site complete all as specified and directed. |
| 70 | Supply and fix rotational moulded polyethylene water storage tanks (ISI marked) of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and directed. |
| 71 | Supply and fix in repairs PVC (SWR) floor trap, 75mm bore, plain with grating including joints with solvent cement complete all as specified and directed. |
| 72 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc.complete all as specified and directed. |
| 73 | Supply and fix PVC eves gutter heavy duty half round 200mm dia including drop end with all necessary Flat Iron fitting complete all as specified and directed. |
| 74 | Supply and fix 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints including connecting fittings, fixed on walls complete all as specified and directed. |
| 75 | Material and labour for chequered cement concrete tiles of size 30cmx30cm x25mm thick, with mix of grey cement and pigments, set, jointed and pointed in neat cement slurry and pointed with mixture of grey cement and pigments in floors including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 76 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Grade with grey cement & pigment etc including 50mm thick bedding with 6 to 10 mm graded coarse aggregate complete all as specified and directed. |
| 77 | Material and labour providing 100mm cement concrete 1:4:8 Type D2 (40 mm graded aggregate) in cement concrete in sub-floors, sub-bases, floors and paving, etc. complete all as specified and directed. |
| 78 | Demolition and breaking up drain pipes (salt glazed wave, AC or reinforced concrete) set in cement mortar 100 mm dia, complete all as specified and directed. |
| 79 | Supply and fix in repair PVC (SWR) Bend 110 mm Dia complete all as specified and directed. |
| 80 | Dismantling chain link fencing, wire mesh etc. any type complete all as specified and directed. |
| 81 | Supply only PVC coated MS chainlink fencing of mesh size 50x50x4mm dia etc. complete all as specified and directed. |
| 82 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, etc. including provision of binding wires complete all as specified and directed. |
| 83 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in concrete complete all as specified and directed. |
| 84 | Excavating in post holes (or similar holes) each n. exc. 0.5 cum getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers nexc. 25cm watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and directed. |
| 85 | Material and labour for cement concrete 1:2:4 type B2 (40 mm size graded aggregate ) in post holes complete all as specified and directed. |
| 86 | Supply and fixed Mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165. complete all as specified and directed. |
| 87 | Supply and fix mild steel screw bolts dia of neck 5 to 10 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,but length of bolt exc 5cm but n exc 10cm long complete all as specified and directed. |
| 88 | Supply and fix mild steel round bars 10mm dia cut to length, bent to shapes required for bracing in chain link fencing complete as specified.quality confirming to Fe -410-W (Gde E-250) Quality-A complete all as specified and directed. |
| 89 | Supply and fix in repair steel rolling shutters push pull or manual type having thickness of lath 1.25mm, with out ball bearing, as specified including top cover,anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete complete all as specified and directed. |
| 90 | Supply and fix in repair ball bearing for rolling shutters complete all as specified and directed. |
| 91 | Cleaning of PVC/SWG/CI pipe line 75/100/110 mm dia by manual or mechanical using cleaning rod or compressor and removal of foreign material after removing the existing blockage below ground including necessary excavation and refilling and making good complete all as specified and directed. |
| 92 | Cleaning of PVC/SWG/CI pipe line 150mm dia by manual or mechanical using cleaning rod or compressor and removing of foreign material after removing the existing blockage below ground including necessary excavation and refiling and making good the disturb surfaces complete all as specified and directed. |
| 93 | Cleaning/clearing chock up of IWC/EWC by manual or mechanical using cleaning rod or compressor etc complete all as specified and directed. |
| 94 | Cleaning/clearing chock up of floor trap/nahani trap or gully trap by manual or mechanical using cleaning rod or compressor etc complete all as specified and directed. |
| 95 | Supply and laying hume pipe septic tank of 10 user capacity designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete all as specified and directed including demolition of rusted unserviceable septic tank. |
| 96 | Material and labour for chipping and removing damaged plaster,de-bonded concrete, cracked portion, loose concrete etc, to a minimum depth of 30mm behind the existing corroded/damaged reinforcing bars using chisel & hammer/ concrete breaker machine in low vibration mode and preparation of concrete surface area using wire brush, scrapper and finally using water washing to completely remove dust, debris, unwanted particles etc including necessary scaffolding complete all as specified and directed. |
| 97 | Material and labour for drilling holes at specified location to required depth and diameter as directed by Engr-in-charge for injection grouting of low viscosity epoxy grout Nitofill UR63 two part solvent-free, polyurethane resin system using with average 300gm per holes through nipples using pressor grouting machine or as per manufacturer directions including necessary scaffolding complete all as specified and directed. |
| 98 | Material and labour for plastering in damaged area with shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar,renderoc SP40, complete all as specified and directed. Please Enable Macros to View BoQ information |
