Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, in all leads and lifts and as per directions of The Engineer-in- charge complete. Disposed earth to be levelled and neatly dressed |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work but including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work but including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work but including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 5 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 12.5mm nominal size) including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 6 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 7 | Providing form work with steel plates 3.15mm thick welded with angle iron frame 30x30x5mm, so as to give a fair finish including centring, shuttering and propping etc. with wooden battens and ballies, upto all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced and plain concrete work including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in :- (a) Foundation, footing basis of columns etc. and mass concrete . |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron frame 30x30x5mm, so as to give a fair finish including centring, shuttering and propping etc. with wooden battens and ballies, upto all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced and plain concrete work including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in :- (b) Flat surfaces such as soffits of suspended floors, roofs, landings and the like Floors etc upto any thickness. |
| 9 | Providing form work with steel plates 3.15mm thick welded with angle iron frame 30x30x5mm, so as to give a fair finish including centring, shuttering and propping etc. with wooden battens and ballies, upto all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced and plain concrete work including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in :- (c) Beams, cantilever, girders and lintels sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor.. |
| 10 | Providing form work with steel plates 3.15mm thick welded with angle iron frame 30x30x5mm, so as to give a fair finish including centring, shuttering and propping etc. with wooden battens and ballies, upto all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced and plain concrete work including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in :- (d) Columns, Pillars, Piers, Abutments, Posts and Struts |
| 11 | Providing form work with steel plates 3.15mm thick welded with angle iron frame 30x30x5mm, so as to give a fair finish including centring, shuttering and propping etc. with wooden battens and ballies, upto all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced and plain concrete work including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in :- (e) Stair cases with sloping or stepped soffits excluding landing upto floor all levels. |
| 12 | Providing form work with steel plates 3.15mm thick welded with angle iron frame 30x30x5mm, so as to give a fair finish including centring, shuttering and propping etc. with wooden battens and ballies, upto all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced and plain concrete work including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in :- (f) Edges of slabs and breaks in floors and walls. upto floor all levels. |
| 13 | Providing Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size), including curing and carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 14 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 15 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability All works upto plinth level including curing and carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 16 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability,All works above plinth level upto floor V level, including curing and carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete in:- |
| 17 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 18 | Stone soling/boulder filling dry hand packed in under floor of all heights including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse cum sand) including curing and carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class esignation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) including curing and carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete |
| 21 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 22 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:3 (1 cement :3 coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 23 | Providing and fixing M.S. channel frame for doors Windows (ISLC) with M.S. flat in combination and MS flat for rebate welded together to make one frame, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 24 | Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position in 2nd class deodar wood including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 25 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 40x40x4 mm, joints mitred and welded by angle iron 50x4 mm flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion in side grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 27 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 28 | Extra for Providing and Fixing of PGI Sheet from inside the shutters lining, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 29 | Providing and fixing aluminium sliding door bolts, 300x16mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 30 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 6 mm thick DOUBLE glass unit, including ISI marked M.S. pressed butt hinge bright finished of required size with necessary screws.37.5mm thick 2nd class devdar wood (Openable Shutter) including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 31 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :37.5 mm thick shutters including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 32 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 33 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 6 mm thick double glass sheet, including ISI marked M.S. pressed butt hinge bright finished of required size with necessary screws.40mm thick 2nd class devdar wood (Fixed Shutter) including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 34 | Providing and fixing Aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (a) 200x10 MM |
| 35 | Providing and fixing Aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete.(b) 150x10 MM |
| 36 | Providing and fixing Aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete.(c) 100x10 MM |
| 37 | Providing and fixing Aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (a) 125 mm |
| 38 | Providing and fixing Aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete.(b ) 100mm |
| 39 | Providing and fixing Aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete.(c) 75mm |
| 40 | Providing and fixing oxidised M.S. hasp and staple (safety type) 115mm conforming to IS : 363 with necessary screws etc. complete, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 41 | Providing and fixing bright finished brass hard drawn hooks and eyes, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (a) 250mm |
| 42 | Providing and fixing 19 mm thick water proof termite resistant commercial board box including shelves and shutters, the back side cup board / cabinet shall be 8 mm thick ply and all the cut portions of shelves shall be finished with 6 mm thick hard wood edging. The cut portion of shutters from all sides shall also be finished with 12 mm thick hard wood edging. The shutter from out side shall be finished with 4 mm thick vaneer Ply of approved shade to match with panelling including stainless steel hinges hinges and magnetic catcher with in all accessories etc. complete, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 43 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate, including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 44 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick, including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 45 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick, including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 46 | Providing and laying vitrified floor tiles in different sizes of (AGL/JOHNSON/ KHAJARIA/SIMPOLO TILES) (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., SIZE 600X600mm, including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 47 | Providing and laying Vitrified tiles in different sizes of (AGL/JOHNSON /KHAJARIA) (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 48 | Providing and laying matt finished vitrified tile of size 300x300 x 9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in Charge. including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 49 | Providing and laying Ceramic glazed floor tiles of (AGL/JOHNSON/KHAJARIA /SIMPOLO TILES) size 300x450 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand, Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 50 | Providing and fixing 19 mm Granite of any colour and shade thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.,including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 51 | Providing and fixing 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stone including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 52 | Providing and fixing 0.62mm (Zero point six two milimetre) thick preprinterd steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 53 | Providing and fixing ridges or hips 62 cm overall with 0.62mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required and including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 54 | Providing and fixing valley 90 cm overall 0.62mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required and including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 55 | Providing and fixing 30 cm wide, 30 cm overall semi- circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. : 0.80 mm thick with zinc coating not less than 275 gm/m2 including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 56 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 57 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet,spaced 1200 mm centre to centre, and cross “T” of size 24x28 mmmade out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 58 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, kg railings, brackets, gates and similar work including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 59 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. : 110 mm diameter including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 60 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (a) Coupler :110 mm |
| 61 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (b) Bend 87.5° 110 mm bend |
| 62 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 63 | 15mm cement plaster on roughsideof singleor half brick wall of mix: 1:6 (1 cement: 6 coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 64 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 65 | 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 66 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 67 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.Two or more coats on new work, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 68 | Finishing with deluxe multi surface paint system for interior and exteriors using primer as per manufactures specification: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 69 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 70 | Providing and applying white cement based putty of (BIRLA WHITE WALL PUTTY) of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 71 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like.. including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 72 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc.including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 73 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 250 mm diameter, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 74 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Half Round S.W. pipes including bed concrete as per standard design : 250 mm diameter S.W. pipe, , including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 75 | Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 76 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (a) 15 mm nominal bore |
| 77 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (b) 20 mm nominal bore |
| 78 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (c) 32mm nominal bore |
| 79 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :. 25 to 40 mm nominal bore, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 80 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately), including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 81 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore, including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 82 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc. including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (a) 2025 (25 mm OD) pipe |
| 83 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc. including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (b) 1620 (20 mm OD) pipe |
| 84 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc. including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (c) 1216 (16 mm OD) pipe |
| 85 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.:Hindware or its equivalent WC seat 53x38CM including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete |
| 86 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm of hindware or its equivalent with a pair of 15 mm C.P. brass pillar taps, including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete |
| 87 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 88 | Providing and fixing white vitreous china flat back half stall urinal with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 89 | Providing and fixing P.V.C. waste pipe (Semi rigid pipe 40mm dia) for sink or wash basin including P.V.C. waste fittings complete and including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 90 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 91 | Providing and fixing C.P. brass bib cock 15 mm nominal bore of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 92 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 93 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 94 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 95 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (a) 15mm |
| 96 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (b) 20mm |
| 97 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 98 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore, including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 99 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes 110 mm ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 100 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes 150 mm ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. |
| 101 | Providing and fixing PVC floor trap 110 mm X 90 mm of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 102 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (a) 110mm Dia |
| 103 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. (b) 150mm Dia |
| 104 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete (a) 110mm Dia |
| 105 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete (b) 150mm Dia |
| 106 | Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (a) 110mm Dia |
| 107 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per direction of The Engineer– in – Charge complete (a) 110mm Dia |
| 108 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per direction of The Engineer– in – Charge complete (b) 150mm Dia |
| 109 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (a) 110mm Dia |
| 110 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete including carriage of materials in all leads and lifts and as per directions of The Engineer-in-Charge complete. (b) 150mm Dia |
| 111 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete (a) 110mm Dia |
| 112 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slabwith 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : (A) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (Light duty) 450x610 mm internal dimentions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete |
| 113 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
