|
| 1 | Demolition of (unreinforced) Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed |
| 2 | Demolition of (unreinforced) Concrete in ground floor and paving n.exc 15 cm thckness, complete all as specified and directed |
| 3 | M&L for 25 mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and directed |
| 4 | M&L for 10mm thick rendering 10mm thick in CM 1:4 using water proofing compound on fair faces of brick/ concrete surfaces and finished the surfaces even and smooth wthout using extra cement, complete all as specified and directed Note: Water proofing compound shall be measured and paid separately. |
| 5 | Supply only liqiuid water proofing compound |
| 6 | M&l for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed |
| 7 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 8 | M&L for thick plain Cement concrete type Cement concrete 1:5: 10 (type E2) in foundations, filling and mass concrete 40mm graded aggregate) complete all as specified and directed |
| 9 | Supplying and laying of 40mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 10 | Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 20mm thick screed bedding in CM 1:4, complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified |
| 12 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over 10mm thick rendering in cement mortar 1:4,complete all as specified and directed. |
| 13 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sq. m complete all as specified and directed. |
| 14 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sq. m complete all as specified and directed. |
| 15 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m, complete all as specified and directed. |
| 16 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar 1:4, complete all as specified and directed |
| 17 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 18 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 20 | S&F for 100 butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed. |
| 21 | S&F for 150mm aluminium anodised, barrel tower bolts of extruded section , complete all as specified and directed. |
| 22 | Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete al as specified and directed. |
| 23 | Taking up or down 25mm dia bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 24 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 25 | Supply, fixing and laying 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA), complete all as specified and directed. |
| 26 | Supply, fixing and laying 25mm outer dia brass Tee/Brass reducer Tee 25x20mm complete all as specified and directed. |
| 27 | Taking up or down 15mm dia bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 28 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 29 | Supplying and fixing of CPVC brass Tee for 20 mm outer dia pipe, complete all as specified |
| 30 | Supplying and fixing of CPVC Brass Elbow for 20 mm outer dia pipe, complete all as specified |
| 31 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 32 | Supply and fixing in repair counter wash hand basin white (with collar) ovel ceramic glossy finish, size 22\\"x16\\"x8\\", complete all as specified and directed. |
| 33 | Supply and fixed in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete including ,P/S' traps, complete all as specified and directed. |
| 34 | Supply and fixed in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 35 | Supply and fixed plastic water closer seat, white, closed pattern with flat bottom, and cover and chromium plated or aluminised hinging device, complete all as specified and directed. |
| 36 | S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, complete all as specified and directed. |
| 37 | S&F in repair 15mm bore Pillar taps swan neck with flange, cast copper alloy chromium plated, fancy type, screwed down screwed for iron pipe, complete all as specified and directed. |
| 38 | .S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 39 | S&F in reapirs Tubular towel rail, 20mm dia, D type, 60cm long between flanges including screws for fixing, completed all as specified and directed. |
| 40 | Supply and fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 41 | S&F in repairs bib taps, cast copper alloy chromium plated fancy type, crewed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 42 | S&F for 15mm dia bore angle stop valve/ Stop valves, cast copper alloy chromium plated fency type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 43 | S&F for 15mm dia bore stop valves with long shank and cup (concealed type), cast copper alloy chromium plated fency type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 44 | S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 45 | PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 46 | S&F for grating doom 100mm dia of PTMT (Minimum weight 25gms, complete all as specified nd directed. |
| 47 | S&F in repairs vitreous China Urinal, full stall type,Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 48 | Cutting holes n. exc 150 Sq. cm into or through brick walls built in cement mortar, complete all as specified and directed.. |
| 49 | Demolition ofcement Concrete(Reinforced) of any description and in any position not otherwise specifically provided for |
| 50 | M&L for RCC (nominal mix)type B1 1:2:4( using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 51 | Use and waste for form work(rough finished surfaces of concrete) to flate surfaces of soffits and sides of suspended shelves and similar work etc; complete all as specified and directed. |
| 52 | M&L for mild steel bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips), complete all as specified and directed. |
| 53 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, , complete all as specified and directed. |
| 54 | M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 55 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 56 | M&L for brickwork with fly ash bricks(Old size bricks) in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified and directed. |
| 57 | S&F for 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 58 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 59 | S&F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 60 | Taking down cement plaster in any description and in any positionc, complete all as specified and directed. |
| 61 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick/ concrete surfaces and finished the surfaces even and fair, complete all as specified and directed. |
| 62 | M&L for rendering 15mm thick in CM 1:6 as in under layer and 5 mm thick in CM 1:4 water proofing compound as per manufacturers instruction on fair faces of brick/ concrete surfaces and finished the surfaces even and fair, using with , complete all as specified and directed.Note: Water proofing compound shall be measure and paid aeparately. |
| 63 | preparation of old decorated surfaces of wall Complete removal Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bond distemper, complete all as specified and directed. |
| 64 | preparation of old decorated surfaces of ceiling surfaces and applying two coats of white wash, complete all as specified and directed. |
| 65 | Taking down eaves gutters and rainwater pipes/SWR pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 66 | S&F for 110 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement, laid in trenches or in floors, complete all as specified and directed. |
| 67 | S&F for 110 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement,fixed on walls, complete all as specified and directed. |
| 68 | S&F for 75 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement, laid in trenches or in floors, complete all as specified and directed. |
| 69 | S&F for 75 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement,fixed on walls, complete all as specified and directed. |
| 70 | S&F for stack clamp 50mm by 5mm flat iron and 16mm dia round bar atays, including bolts snd nuts and securing ends of stsys to wall or roof for pipe 110mm, complete all as specified and directed. |
| 71 | S&F for stack clamp 50mm by 5mm flat iron and 16mm dia round bar atays, including bolts snd nuts and securing ends of stsys to wall or roof for pipe 75mm, complete all as specified and directed. |
| 72 | S&F for PVC(SWR) bends 110mm bore setting and jointing to solvent cement. |
| 73 | S&F for PVC(SWR) Tee equal or unequal for 110mm bore pipe with access door setting and jointed with solvent cement, complete all as specifed. |
| 74 | S&F for PVC(SWR) vent cowl 110 mm dia bore setting and jointed with solvent cement, complete all as specifed. |
| 75 | S&F for PVC(SWR) Tee equal or unequal for 75mm bore pipe with access door setting and jointed with solvent cement, complete all as specifed. |
| 76 | S&F PVC(SWR) 75mm dia bore floor trap with grating including jointing to solvent, complete all as specified and directed. |
| 77 | S&F for PVC(SWR) bends 75mm bore setting and jointing to solvent cement. |
| 78 | S&F for PVC(SWR) vent cowl 75mm dia bore setting and jointed with solvent cement,complete all as specifed. |
| 79 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 80 | S&F for PVC SWR gully trap 125/110 mm setting in cement mortar and jointing with solvent cement, complete all as specified and directed. |
| 81 | S&F for 40 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed. |
| 82 | S&F for 125 mm in size extruded aluminium alloy handles, fabricated type, anodised. complete all as specified and directed. |
| 83 | M&L for rendering 10mm thick in CM 1:3 on fair faces of brick/concrete surfaces and finished the surfaces even and fair,s, complete all as specified and directed |
| 84 | Preparation of old decorated surfaces of ceiling and applying two coats of oil bond distemper |
| 85 | S&F for 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and fixing at site properly,complete all as specified and directed |
| 86 | S&F for 32mm dia Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) ,complete all as specified and directed |
| 87 | S&F for stainless steel towel ring adequate size,complete all as specified and directed |
| 88 | M&L for Cutting holes in brick walls exc half brick but n.exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed. |
| 89 | Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and refixing in the same opening after repairing, complete all as specified and directed. |
| 90 | S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 91 | S&F FI 25x3mm for hold fasts stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay),conforming to Fe 290 GDE E-165, complete all as directed. |
| 92 | Preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 93 | M&L preparing newly plastered surfaces of walls and applying two coats of Oil bound distemper on untreated plastered surfaces of walls over thin layer of wall putty and primer including necessary preparation of surfaces all as specified and as directed. |
| 94 | Preparation of new plastered surfaces of wall and applying two coats of exterior grade weather proof paint on untreated plastered surfaces of walls over a coat primer and putty including necessary preparation of surfaces all as specified and as directed. |
| 95 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceilingroses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as directed. |
| 96 | Material & Labour for Wiring complete with 1.5 sqmm single core FRLSH PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall, making good disturbed surfaces of walls and fixed on ceiling etc with suitable clamps, screws, etc for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed for One Light point controlled by one switch :- |
| 97 | All as per item No. 96 here in before but for One Exhaust fan point controlled by one switch |
| 98 | All as per item No 96 here in before but wiith 4 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board. |
| 99 | Taking down sub main wiring (or)power wiring complete upto2 runs of 4 Sqmm in PVC conduit or Concealed removing to stores or taken as credit and making good the disturbed surfaces of wall, etc all as directed. |
| 100 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 4 sqmm including one run of 4 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories incl accessories fixed on concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly all as specified and directed. |
| 101 | Supply and Fix Ceiling rose surface Bakelite 65mm x 50 mm two to three terminals all as directed. |
| 102 | Supply and Fix Modular Switch flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 103 | Supply and Fix Modular Switch flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 104 | Supply and Fix Modular Socket flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 105 | S&F Modular white cover with plate with frame 2 modules including flush box |
| 106 | S&F Modular white cover with plate with frame 3 modules including flush box |
| 107 | S&F Modular white cover with plate with frame 8 module including flush box |
| 108 | Supply and fix in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 63 Amps rated busbar with neutral link, 8 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 109 | Supply and fix MCB SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.Make:Havells /L&T/ Legrand/ ABB |
| 110 | Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. |
| 111 | Supply and fix in repairs 40W LED aluminium battens high wattage decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed. |
| 112 | Supply and fix in repairs 10W LED battens decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient complete all as specified and as directed. |
| 113 | Taking down old Exhaust fan and kept in MES store where as directed. |
| 114 | Supply and fix in repairs/ replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm |
| 115 | Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed. |
| 116 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 Cm thick soft / loose soil all as specified and as directed. |
| 117 | Removing excavated material (Soils) from site to a distance not exc 50 M away and depositing where directed at a level not exc 1.5mtr above the starting point all as specified and as directed. |
| 118 | Supply, lay/spread in trenches, riddled earth including cleaning, spreading, leveling for laying/cushioning of cable all as specified and as directed.Note:- Punned thickness of riddled earth shall be measured and paid. |
| 119 | Material and Labour burnt bricks sub class 'B' old size laid in trenches with equal to length of bricks across the cable for cable protection all as specified and as directed |
| 120 | M & L for Plain Cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete including necessary form work with fair finished surface all as directed. |
| 121 | M & L for Plain Cement concrete type C1 1:3:6 (20 mm graded stone aggregate) for coping to the poles with finishes with out using extra cement complete all as specified. |
| 122 | Disconnecting and taking out old unserviceable LT UG cable in trenches, wall & poles and taken as credit including supply and laying in trenches/poles/wall etc LT UG cable XLPE insulated, armoured, heavy duty with multistandard aluminium conductor, 1100 volts grade of size 4 Core 10 Sqmm confroming IS specification and of the following size:-Note:- Lugs and glands are deemed to be including in the rate quoted for laying of cable and to be used wherever required while connecting the cables to the panel board. Earth work such as excavation, refilling etc, shall be measured and paid seperately under relevant item:- |
| 123 | All as per Sl. Item No. 122 here-in-before but of cable size 3.5 Core 35 Sqmm |
| 124 | Dismantling the old existing RCC/Steel pole with coping and taken as credit. |
| 125 | Supply and fixing Steel tubular swaged pole complete with MS Base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP - 31(9.00 meter long) confirming to IS-2713 , including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer over the exposed surface and applying two coats of black bitumenous paint over the embeded portion of pole, erecting in truly vertical position including excavation in any strata and earth work complete all as specified and directed.Note:- PCC for foundation and coping will be measured and paid seperately under relevent items of sch 'A'. |
| 126 | Supply & Fix street lights single arm bracket with clamp suitable for 9 mtr pole as directed. |
| 127 | Taking down the old unseviceable junction box and taken as credit including S & F juction boxes weather proof type with hinged type door off white colour of size 280x145x100mm with three pole connector and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts with 6 A MCB arrangements all as specified and directed. |
| 128 | M & L for removing the existing street light fitting of any type & make and supply & installation of new 90 watts LED 5700K new generation energy saving & environment friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source in existing pole duly wired complete all as specified and directed. |
| 129 | Removing the existing unserviceable bollard light & supply and installation of 15 W LED bollard light TLLUM series, IP 65 rating, 3000K warm white, 4 KV surge protection, Total Harmonic Distortion <10%, impact protection IK 07, Colour Rendering Index(CRI)>70 , out door luminaires, New generation energy & envirobmental friendly long life aeshetically designed alumunium land scape luminarire for diffused lighting with high power LED bollards as light source and connecting in the existing cable complete all as specified and directed. |
| 130 | Supply and laying 1100 volts grade heavy duty cable with PVC inslulated aluminium conductor served with in inner sheating of PVC tape and overall PVC sheated 3 core 2.5 sqmm nominal cross section in service connections/street light connection from junction box to street light fittings. |
| 131 | M & L for remong the existing flood lights from poles and supply and fixing LED flood light 100 watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 132 | Supply, installation, testing and commisioning LT Panel out door, floor mounted/pedestal type, cubical, self supported, CPRI approved, front and rear openable , double door hinged type with locking arrangement and slopping top canopy, suitable ventilations on both side with wire mesh, IP-52 protection with dust and vermin proof etc. fabricated out of 3.15 mm CRCA sheet duly powder coated with 7 tank chemical process, mounted/fixed on and including MS angle iron stand of 1.0 mtr height, fabricated out of 50x50x6mm thick MS angles duly painted with black enamel synthetic paint over a red oxide primer duly agouted in PCC 1:3:6 foundation control wiring copper strander PVC inslulated FRLS cables not less than 1.5 sqmm, suitable size/capacity of copper strip for switch gear connection from main bus bar, earth bus strip of 30x5 mm size for entire lenght of panel, suitable size of MS gland plate and alluminium lugs/thimbles for all incoming/outgoing cables etc. complete all as directed and accommodating the followings:- |
| 133 | (i) MCCB 4 pole, 415 Volts, 200 Amps rating, rupturing capacity 36 KA thermal magnetic release, fixed over load and short circuit protection- 01 No( for incoming)(ii) MCCB 4 pole, 415 Volts, 100 Amps rating, rupturing capacity 25 KA thermal magnetic release, fixed over load and short circuit protection- 03 Nos( for outgoing)(iii) MCCB 3 pole, 415 Volts, 63 Amps rating, rupturing capacity 16 KA thermal magnetic release, fixed over load and short circuit protection- 02 Nos( for outgoing)(iv) LED type phase indicator with controlling fuses for RYB-01 Set (v) Digital ammeter 96 sqmm 0 - 100 Amps with suitable CT's and selector switch - 01 set(vi) Digital voltmeter 96 sqmm 0 - 500 Volts with selector switch - 01 set(vii) Timer switch (Auto switching device operating on real time) digital type with min. switching time of 1 sec, having wide range of swithches week & day program with reserve 30 min, including one MCB TP 32 Amps and on contactor three phase, 4 pole, AC control, 415 Volts, 25 Amps (viii) Electrotype copper busbars PVC colour sleeved 250 Amps capacity TPN mounted on hygroscopic insulator dully colour coded RYB & Green sleeves. |
| 134 | Material and labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as spcified and as directed |
| 135 | Supply and install High wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity of 2 TR, BEE 5 star rated complete all as specified and directed. Make- Hitachi or equivalent to Blue Star/Godrej |
| 136 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.00 KVA complete all as specified and as directed. |
| 137 | Supply and fix metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps all as specified and as directed. |
| 138 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FR-LSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 4 sqmm including one run of 4 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of suitable dia PVC casing caping and accessories fixed on wall/ceiling etc, or concealed in wall and connecting to common earth dolly all as specified and directed. Please Enable Macros to View BoQ information |
