|
| 1 | Item Description/ Heading |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lif. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering but excluding cost of reinforcement,1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 6 | Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete - Thermo-Mechanically Treated bars |
| 7 | Providing and fixing on wall face PVC SWR pipes conforming to IS :13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (In case SWR pipes is laid on ground, cost of trenching & filling, if required is to be paid separately)110 mm diameter (Type A) |
| 8 | Cleaning of septic tank with removal of sludge night soil etc complete and putting the waste materials by digging pit within a distance of 1km and coverring the same as per the instruction of Engg-in-charge |
| 9 | Providing and fixing 1mm thick M.S. sheet door with frame of 30x30x5mm angle iron with all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 20x6mm for diagonal braces and central cross piece. |
| 10 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below |
| 11 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete - 40 mm thick with 20 mm nominal size stone aggregate. |
| 12 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 13 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. (Parryware/Hindware/Cera or equivalent)Orissa pattern W.C Pan of size 580x440mm |
| 14 | Providing and fixing white vitreous china pedestal type water closet (European typeW.C. pan) with seatand lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 15 | Providing services for miscellaneous nature of unskilled work as per direction of Engineer-in-charge for a period of 8 hrs a day |
| 16 | Labour charges for day to day maintenance works related with welding works like welding of hinges, welding of flats in window grills and other petty jobs related with welding works as and when required by deploying welder beldar/coolie in residential quarters of colony. as per instruction of Engineer-in-charge. (1 Skilled and 1 unskilled worker per day) |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe32 mm dia |
| 18 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore |
| 19 | Providing and fixing C.P. brass 2 in 1 quarter turn bib cock of approved quality as approved by Engineer-In-Charge. 15 mm nominal bore |
| 20 | Providing and fixing Health Faucet with CP Tube & Hook set upto 1.25 metre long quality and make as approved by Engineer - in - charge. |
| 21 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 22 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x460 mm bowl depth 200 mm |
| 23 | Providing and fixing C.P. brass bib cock of Plaza, Jaguar or any brand approved quality conforming to IS:8931 as approved by Engineer-In-Charge.15 mm nominal bore |
| 24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 25 | Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles. |
| 28 | Stone work (machine cut edges in veneer work) for wall lining upto 10 m height, backing filled with agrout of 12mmthick cementmortar 1:3 (1 Cement: 3 coarse sand) and jointed with Cement mortar 1:2(1 cement : 2 stone dust), including grinding with hand grinder on joints, rubbing and polishingcomplete. (To be secured to the backing and the sides by means of cramps and pins which shall bepaid for separately).Prepolished kota stone slabs on exposed face.25 mm thick |
| 29 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia |
| 30 | Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 metres lead of:G.S.sheet. |
| 31 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm |
| 32 | Providing ridge or hips of width 60 cm over all width plain G.S.sheet sheet fixed with polymer coated j or Lhooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exteriorprimer applied @ 0.90 litre/10 sqm) |
| 34 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 35 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than50 grams/ litre, of approved brand and manufacture, including applying additional coats whereverrequired, to achieve even shade and colour.Two coats or more coats |
| 36 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 37 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work |
| 39 | Applying priming coats with primer of approved brand and manufacture, having low VOC (VolatileOrganic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 40 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |