|
| 1 | Dismantling ALUMINIUM / GYPSUM PARTITIONS, DOORS, WINDOWS, FIXED GLAZING AND FALSE CEILING including disposal of unserviceable material and stacking of serviceable material within 250meters lead as directed by Engineer-in-charge. |
| 2 | Providing Core Cutting for walls/ for slabs of various dia including making good with suitable cement mortar and cleaning as directed by Engineer In-ChargeFor dia 80-300mm upto 300mm depth |
| 3 | Removing white or colour wash by scrapping, sand papering the surface smooth including necessary repairs, etc. complete |
| 4 | Providing and laying unbacked flexible P.V.C / marblex flooring / skirting with PVC sheets / Marblex tiles as specified below of approved makeand shade including preparing the surface, cleaning as required and applying adhesive - as recommended by the PVC / Marblex tile manufacturers, laying, aligning, cutting in required size and pattern, trimming of tiles, removing the adhesive stains on the surface including cleaning the surface with soap solution (2 table spoons of soap powder for 5ltr of water) using a cloth or mop or and wiping the dried surface with soft dry cloth etc.; complete all as per specifications.In PVC flooring / skirting / dadoing: with 2mm thick unbacked flexible fully homogeneous PVC sheets in rolls of approved make and quality - viz., Poly floor of M/s. Poly floor vinyl flooring or TUSKER of M/s. Krishna vinyls Limited or Birla vinoleum of M/s. Birla corporation Limited or equivalent make conforming to IS: 3462/ as per approved list of materials |
| 5 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including touch up putty, filling carvices, scrubbing for smooth surface, applying additional coats wherever required to achieve even shade and colour. with one or more coat |
| 6 | Providing and fixing at all heights / in all floors with all leads Colour Anodised Aluminium doors / windows / partitions manufactured from best extruded Aluminium sections conforming to ISI, cut to length, joints mitred and corners grinded with joints water proof the outer frame and shutter frame stiffened with corner angle strips or provided for in the frame for fixing the frame to RCC Columns / masonry on sides, RCC lintels on top and PCC cills or floor at bottom, the frame work fixed with standard approved fastenings all generally as per details shown in drawings and specification with all the sections pre-treated for removal of any rust and prevention of further rust formation and coated with greasy materials for non-adherence of mortar or any other sticky materials and this coat to be removed after installations of the sub-dividing frames by tenoned and riveted into frames all aluminium surface be thoroughly cleaned free or rust scale or dirt and mill scale by pickling surfaces finished with colour anodised dull matt finishing 10 MICRON thick including cost of pull and push plates and fixtures for hinged openings (arrangement with steel bearings wherever necessary), cost of labour for fixing of mortice lever locks, supplied free for fixing including screws / bolts, door felt for side and bottom (or these materials measured separately elsewhere) where shutters are involved etc., complete, cost of providing and fixing of glass of selected glazing quality of thickness and type of glass specified hereinafter or panel boards including nylon or PVC or rubber lining of approved quality wooden grounds, rubber gasket, aluminium glazing clips, mastic etc., and fixing with aluminium glazing clips and also snap-on type with holes as per drawing and specifications provided for separately in the sub items following the main items of frame work for partition and door shutters as below: NOTE: All fitting works shall be carried out as per I.S specifications including necessary rivets, screws, lugs, scaffolding, etc., complete all generally as per drawings. The sizes of the components should confirm as per details in drawings. Providing and fixing of Colour Anodised Aluminium (Matt finish) frame work (horizontal and verticals) for partitions Doors / Windows with required sections of JINDAL / INDAL make or equivalent including all items and contingencies described above complete (Aluminium beadings and glazing clips measured under this item only). |
| 7 | Providing and fixing of frame work (styles and rails) for doors shutters / window shutters with required sections of JINDAL / INDAL make or equivalent including providing all items and hinged / pivoted / sliding arrangements for operation of shutters and labour cost for fixing of door fittings and locks (which shall be free issues for fixing or paid separately) etc., complete. (Aluminium beadings and glazing clips measured under this item only.) |
| 8 | Providing and fixing glass panes of selected glazing quality and thickness as specified below including providing and fixing Nylon / Rubber / PVC lining of approved quality and fixing with Aluminium glazing clips / Aluminium beadings (Supply cost of Aluminium clips / Aluminium beadings are measured in items above for DOORS / WINDOWS / PARTITIONS etc., using 4.5mm to 5.0mm thick plain glass |
| 9 | Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on both sides |
| 10 | Supplying and fixing aluminium anodised mortice lock 6 levers 100mm conforming to I.S 2209 'Godrej' or equivalent make, straight edged bevelled or rotated as required, right or left handed as directed, suitable either to single or double leaf shutters including making neces- sary recess in shutter and fixing the mortice lock with aluminium anodised steel screws, etc; complete all as per specifications. |
| 11 | Providing and Fixing in position Dorma TS-68 door closer or Equivalent make.Complete all as per direcrtions of Engineer-in-Charge. |
| 12 | Providing and fixing at all height in all floor with all lead seamless type M/F suspended Calcium silicate boards of 12.5mm tk False ceiling of Gyproc or equivalent using GI perimeter channel of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screws fixed to brick wall / partition with the help of nylon sleeves and screws at 610mm centres. Then suspending GI intermediate channels of size 45mm (0.9mm thick with two flanges of 15mm each) from the soffit at 1220mm centres with ceiling angle of width of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of NOTE: For lighting fittings, grills diffuses and cut-outs etc., have to be made with the frame of perimeter channels of size 20mm x 27mm x 30mm x 0.55mm thick supported suitable and should be considered as per drawing. |
| 13 | Painting INTERNAL plastered surfaces with TWO or more coats of PREMIUM SUPER ACRYLIC EMULSION PAINT of approved brand and colour (Asian or Berger or equivalent) to give an even shade with required finish over a coat of water thinnable cement primer including cleaning the surfaces, filling the crevices with approved filler, applying a coat of approved putty on whole surface and rubbing the surface to achieve desired smooth surface, scaffolding, etc., complete all as per specifications and directions of Engineer-incharge. |
| 14 | Painting WOOD / STEEL WORK with ONE or more coats of SYNTHETIC ENAMEL PAINT of first quality and approved colour to give an even shade including cleaning the surfaces, filling the crevices with approved filler, scaffolding, etc.; complete all as per specifications. |
| 15 | Care fully Removal and refixing the existing fixed/openable window glass panes of 5mm thick fixed in aluminium frame works after replacing the neoprene rubber gesket (U type) including necessary charges for materials for a coat of paint with matt finish,labour, etc up to 15mt height and as directed by engineer-in-charge as per specification. |
| 16 | French spirit polishing on wood work with ONE or more coats with readymade superior quality French spirit polish of approved brand and manufacture on OLD WORK all complete as per specifications. |
| 17 | Disposal of surplus excavated earth/ moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, for lead upto 10km for all lifts, complete all as per directions of Engineer-in-charge. Note: Item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5cum or more. Please Enable Macros to View BoQ information |