|
| 1 | Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift - 10 m3 |
| 2 | Supplying and filling in foundation and basement withWell Gravel in layers of not more than 15 cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 3 | Conveyance of excavated earth and clearing away from site to a lead of 2KM from site etc., complete |
| 4 | Plain Cement Concrete1:4:8 (one part of cement, four part of Crushed Stone Sand (M-Sand) and Eight part of coarse aggregates ) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 5 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3 m high using mild steel sheets of size 90 cm X 60 cm X and B.G10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size10cm X 6.5cm (spacedat about 90 cmc/c)and supported dycasur in a props of 10 cm to13 cm dia (spacedof75cmC/C) complying with standard specification and directed- 10 m 2 |
| 6 | Suppling and fabricating and placing in position MS (or)R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 7 | Reinforced Cement concrete 1:1.5:3 (one cement,one and half M.sand & three course aggregate) using 20 mm gauge hand broken/and broken granite stone for all RCC items of works excluding centerings huttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 8 | Supply & Fixing of MS Truss, Purlins and Angles etc., complete complying with standard specification. |
| 9 | Fabricating supplying and fixing of pre-painted galvanium colour sheets with the following specification. Thematerials should be of PPGI tile profile with a red colouror anyotherapproveddesign0.47mm thick 24 guage having width1050 mm. The sheet should be G.I.base pre-painted hot dipped galvanized iron sheet and to be fixedwith shelf tapping screws,plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120 GSM paint thickness the finish shouldbe terracotta finish like malabar mangalore tiles finish optionalmatt finish. The sheet tobe fixedwith making suitable corrugated, cutting the sheet into the requireds size and making ornamental designs as per the site condition and as directedby the departmental officers. |
| 10 | Painting two coats with Ready Mixed Enamel Paint over thenew iron works of approved quality and colour with out priming coat includingthe cost all materials etc., complete, in all floors. |
| 11 | Supplying and layingRubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized inter locking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion be low the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mmthick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. Please Enable Macros to View BoQ information |
