|
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and as directed. |
| 2 | Supply and fix in repair E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designed ceiling board tiles of approved texture at any height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 2mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down wall/ceiling boards(fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as specified and as directed. |
| 3 | Supply and fix in repair Steel rolling shutters, 1mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type with bevel gear box and crank handle type,including dismantling,Thickness of laths in mm 1.0, complete all as specified and as directed. |
| 4 | Supply and fix in repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle type,including dismantling, thickness of laths in mm 1.0, complete all as specified and as directed. |
| 5 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified and as directed. |
| 6 | Material and labour pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 7 | Material and labour for plain, galvanised mild steel sheeting in ridges hips valleys gutters drip and straight flashing (length and girth as fixed) by using .63mm thick sheet grade of zinc coating @275 Gms/sqm both sides and welded or soldered joints including necessary fittings complete all as specified and as directed. |
| 8 | Material and labour for plain, galvanised mild steel sheeting in ridges hips valleys gutters drip and straight flashing (length and girth as fixed) by using 1.0mm thick sheet grade of zinc coating @275 Gms/sqm both sides and welded or soldered joints including necessary fittings complete all as specified and as directed. |
| 9 | Dismantling of asbestos cement (corrugated or semi corrugated) sheets/fibre sheet in roof covering complete all as specified and as directed. |
| 10 | Material and labour 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or screws J-type or cranked hook bolts complete all as specified and as directed. |
| 11 | Material and labour asbestos cement one piece plain angular ridge 6mm thick Fixed with L-type or screws J-type or cranked hook bolts complete all as specified and as directed. |
| 12 | Supply and fix in repair turbo ventilator with 2 mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts on roof, wall etc complete all as specified and as directed. |
| 13 | Material and labour 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or screws J-type or cranked hook bolts except sheets complete all as specified and as directed |
| 14 | Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed. |
| 15 | Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and as directed. |
| 16 | Supply and fix for aluminum alloy powder coated door shutters partly panelled partly glazed shutter having door frame made out of alumunium anodised section of size 100 x 44.45 x 2.00 mm thick and shutters made out of bottom rail of tube section 114 x 44.45 x 2.00 mm thick and top rail, middle rail, styles of tube section 85 x 44.45 x 2.00mm thick, using 5 mm thick tinted glass of selected quality of required size fixed with rubber beading, aluminium clip, glazing plate and 6-8 mm dia anchor rod and 12 mmm thick both side prelaminated particle board including fixed aluminium anodised 2 nos 125 mm circular handle, 200 mm long tower bolts -2 Nos, Door Stopper 2 Nos, One No lock 4 lever (ISI), vertical type of 65 mm with triplicate key, bush and including 3 Nos aluminium butt hinges, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, making good of wall surface to match with existing surface complete door frame fixed to wall with 8 Nos rawl plugs 150mm, including dismantling old doors complete all as specified and as directed.NOTE :- Particle board and glass is included in this item and no extra payment shall be made for the same. |
| 17 | Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc,including taking down old u/s windows and making good the wall for fixing new window, complete all as specified and as directed. |
| 18 | Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and as directed. |
| 19 | Supply and fix in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 20 | Supply and fix for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 21 | Demolition of Brickwork or stone boulder masonry, built in cement/cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 22 | Material and labour for brickwork with fly ashbricks, straight or curved on plan exc 6m mean radius, Modular bricks in cement mortar 1:4 complete all as specified and as directed. |
| 23 | Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 24 | Material and labour rendering/plastering, 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete sur face of wall complete all as specified and as directed. |
| 25 | Material and labour rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth with out using extra cement complete all as specified and as directed. |
| 26 | Material and labour 15mm thick rendering on concrete/brick surfaces in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified and as directed. |
| 27 | Material and labour for preparing newly plastered surfaces of internal wall and applying two Coats of oil emulsion distemper over priming plastered and other surfaces with alkali resistant priming paint plastered surface complete all as specified and as directed. |
| 28 | Material and labour for preparing newly plastered surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as specified and as directed. |
| 29 | Material and labour for preparation of newly plastered surfacces and applying three coat of white wash as in ceilling complete all as specified and as directed. |
| 30 | Material and labour for complete removal of existing treatment on wall surfaces of any description plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper, including Priming plastered and other surfaces with alkali resistant primer all as specified and as directed |
| 31 | Material and labour for preparation of old plastered or unplastered surfaces of ceiling and applying two coat of oil bound distemper including Priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed. |
| 32 | Material and labour for complete removal of existing treatment on wall surfaces of any description plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer all as specified and as directed. NOTE :- (i) filling of cracks,holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat.(iii) height upto 04 storey |
| 33 | Material and labour for 3mm thick wall care putty on wall/ceiling complete all as specified and as directed. |
| 34 | Dismantling of single layer Mangalore pattern or similar tiles in roof coverings complete all as specified and directed. |
| 35 | Supply and fix roof tiles, Mangalore pattern, inter locking at side joints laid dry complete all as specified and directed. |
| 36 | Description all as per ser No 35 above except tiles . |
| 37 | Supply and fix ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1 : 6 complete all as specified and as directed. |
| 38 | Dismantling battens for tiles singles etc of any size including tiling fillets spaced exc 15 cm complete all as specified and as directed. |
| 39 | Supply and fix second class hard wood clean sawn battens at 30 cm centre to centre and section area exceeding 15 and not exceeding 25 sqcm complete all as specified and as directed. |
| 40 | Description all per item No 39 but except battens complete, fixing only |
| 41 | Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed. NOTE :- Reinforcement where provided shall be measured and paid seprately |
| 42 | Dismantling timber fillets, posts rafter purlin under 40 sqcm framed work in sectional area, complete all as specified and as directed. |
| 43 | Dismantling wroght iron or mild steel work of any description not oterwise provide for complete all as specified and directed. |
| 44 | Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 45 | Supply and fix hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe410-0 or Fe 310-0 complete all as specified and as directed. |
| 46 | Material and labour for Prepration of newly painted steel surfaces of any description n exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer surface complete all as specified and as directed. |
| 47 | Material and labour for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a primer one coat of red oxide complete all as specified and as directed. Please Enable Macros to View BoQ information |
