|
| 1 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 3 | S&F for Pressed Steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. |
| 4 | S&F for Pressed Steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. |
| 5 | S&F second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, complete all as specified and directed. |
| 6 | S&F second class hardwood Flush shutters 35mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 7 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 8 | S&F Factory made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC Sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 9 | M&L Aluminium (powder coated) Sliding Glazed Shutter with frame of suitable size of 3 track with necessary joining cleats, glazing clips, rubber gasket, aluminium snap beading and locking arrangement at both end complete all as specified and directed.Note : (i) Quotated rates are inclusive of Frame and Glass fitting in panels to windows. (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron. (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. |
| 10 | S&F of powder coated aluminum windows and ventilator shutter, side hung, openable, casement type with or without sash bar, aluminum section weighing 0.55 Kg/Mtr including necessary joining cleats glazing clips, rubber packing anodised aluminum snap beading, screws anodised aluminum fitting such as peg stays 150mm long, hingus types B-21 100mm long, suitable handle complete all as specified and directed.Note : (i) Quotated rates are inclusive of Frame and Glass fitting in panels to windows. (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron.(iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. |
| 11 | Supply of 4.8 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square not exc 0.5 Sqm in each panes complete all as specified and directed. |
| 12 | Supply of 4.0 mm thick frosted sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square not exc. 0.5 Sqm in each panes complete all as specified and directed. |
| 13 | S&F MS 1.25mm thick MS plain black sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded as required complete all as specified and directed. |
| 14 | M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, door frames & similar work conforming to Fe 290 complete all as specified and directed. |
| 15 | M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 16 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 17 | M&L for PCC 1:3:6 type C-1 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame complete all as specified and directed. |
| 18 | S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 19 | S&F 300mm long Aluminium alloy with dia 16 mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 20 | S&F 150mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 21 | S&F 100mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 22 | S&F 150mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 23 | S&F 100mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 24 | S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 25 | S&F in repair for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 26 | S&F for 140mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 27 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed. |
| 28 | Supply and fixing of rubber beading door seal 40mm x 5mm strip in bottom of door complete all as specified and directed. |
| 29 | S&F 18-19 mm thick MDF type board interior grade decorative type with prelaminated on one side and balancing white on other side inncluding external teak wood lipping 6mm thick 18/19mm wide fixed with nails on edges complete all as specified and directed. Please Enable Macros to View BoQ information |
| 30 | S&F 18-19 mm thick MDF type board interior grade decorative type with prelaminated on one side and balancing white on other side inncluding external teak wood lipping 6mm thick 18/19mm wide fixed with nails on edges complete all as specified and directed. Please Enable Macros to View BoQ information |
