|
| 1 | Providing and fixing PVC Laminated Gypsum tiles ( Square edge) of size 595x 595 mm and 12.5 mm thick of approved make and laying in true horizonatl level as per directions of Engineer-in-charge. |
| 2 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 3 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 4 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class Kail wood 35mm |
| 5 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing( Rectangular shape 1500x450 mm) |
| 6 | Providing and fixing plain lining tongued and grooved, including wooden plugs completewith necessary screws and priming coat on unexposed surface Second class Deodar Wood, 20 mm thick |
| 7 | Providing and fixing of PVCwall panelling of thickness 10 mm of sizes 10\\" x 120\\" of superior quality & desired texture with min weight of 4 kg per length on walls & ceiling.The panels after fixing should be in line & plumb and cornors should be provided with corner peices all work complete and as directed by the Engineer-in-charge. |
| 8 | Varnishing with varnish of approved brand and manufacture:Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats. |
| 10 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.11.1 Kitchen sink with drain board 510x1040mm bowl depth 250mm |
| 11 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: 18.69.1 Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15mm NB |
| 13 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid. |
| 14 | Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: 18.5.1 Single half stall urinal with 5 liter P.V.C automatic flushing |
| 15 | Providing and fixing brass bib cock of approved quality. 19.9.1 15 mm nominal bore |
| 16 | Providing and fixing 8 mm dia C.P./ S.S Jet with flexible tube upto 1m long with S.S triangular plate to European type W.C of quality and make as approved by EIC. |
| 17 | Re-wiring for light points/fan points/exhaust fan points/call bell points with 1.5mm sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with piano type switch,phenolic laminated sheet suitable size MS box and earthing the point with 1.5mm sqmm FRLS PVC insulated copper conductor single core cable etc as required. Group B |
| 18 | Supply and installation of Geysar of approved brand and manifacture |
| 19 | Supplying of following: |
| 20 | Carpenter Ist Class |
| 21 | Helper Please Enable Macros to View BoQ information |
