|
| 1 | Dismanteling doors ,windows and clerestory windows (steelor wood) shutter including chowkhats,architrave,holdfasts etc. complete and stacking within 50 meters lead: of area of 3sqm.and below |
| 2 | of area beyond 3sqm |
| 3 | taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : of area of 3sqm.and below |
| 4 | of area beyond 3sqm. |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):2nd class D- wood |
| 6 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class D- wood : 35mm thick |
| 7 | providing and fixing glazed shutter for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges finished of required size with necessary screws 30 mm second class deodar wood |
| 8 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood : 30mm thick |
| 9 | Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws: (shutter area to be measured) |
| 10 | providing &fixing of ply 19mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make ( green,century,amulya archid ) conforming BWP 710 LMR |
| 11 | providing &fixing of ply 6mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make ( green,century,amulya archid ) conforming BWP 710 LMR |
| 12 | providing and fixing of 1mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (green,amulya,vigro) LMR |
| 13 | providing and fixing of 0.8mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (green,amulya,vigro) LMR |
| 14 | providing and fixing 4mm thick straight line teak ply including cutting ,wastage,fevicol,nails,carriage etc.complete (green,century,archid) LMR |
| 15 | providing and fixing nickel plated m.s pipe curtain rods ,with nickel plated brackets including fittings (9.47.2)25mm dia |
| 16 | providing &fixing IS Imarked M S pressed butt hinges bright finished with neceesary screws complete:100x58x1.9mm |
| 17 | 75x47x1.7mm |
| 18 | proving &fixing ISI marked oxidized MS sliding door bolts with nuts and screws complete 300x16mm |
| 19 | 250x16mm |
| 20 | proving &fixing ISI marked oxidized MS sliding tower bolts with necessary nuts and screws complete 150x10mm |
| 21 | 100x10mm |
| 22 | proving &fixing ISI marked oxidized MS door latches confirming to IS 5930 with screws complete 250x20x6mm |
| 23 | proving &fixing ISI marked oxidized MS handle confirming to IS 4992 with neceesary screws etc. complete .100 mm |
| 24 | proving &fixing ISI marked almunium hanging floor door stoper ,ISI marked andized with neceesay screw etc complete single rubber stopper |
| 25 | twin rubber stoper |
| 26 | providing and fixing magnetic catcher of approved quality in cupboard/wardrobes shuteers including fixing with mecessary screws etc. complete double strip (horizotal type) |
| 27 | Providing and fixing special quality bright finished brass cupboard or ward robelocks with four levers of approved quality including necessary screws etc. )75mm |
| 28 | Providing and fixing special quality bright finished brass handles with screws etc. complete. 75mm |
| 29 | providing and fixing wooden moulded corner beading of size 50x50 mm (baseand height) of triangular shape to the junction of paneling etc. with iron screws,plugs and priming coat on unexposed surface etc. complete.9.113..1 Second class kail wood |
| 30 | providing & fixing PVC rigid foam sheet 1mm thick on existing door shutters( bathroom /W.C. doors using synthetic rubber based adhesive |
| 31 | Renewing glass panes, with wooden fillets wherever necessary 14.7.2Float glass panes of thickness 5.0 mm (weight not less than 12.5kg/sqm) |
| 32 | Renewing glass panes, with wooden fillets wherever necessary 14.7.1Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 33 | Refixing of old glass panes with putty and nails |
| 34 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or richer mix (i/c equivalent design mix) |
| 35 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm. |
| 37 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 38 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown (Khajaria, Somany double charged) |
| 39 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Khajaria, Somany) |
| 40 | 12mm thick cement plaster of mix (1:4)1cement :4 fine sand |
| 41 | 15mm thick cement plaster of mix 1:4 |
| 42 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 43 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 44 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete: 1mm thick |
| 45 | 2mm thick |
| 46 | Finishing walls with Acrylic smooth exterior paint of required shade: 13.119.1 sqm sqm Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 48 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 49 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work |
| 50 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed |
| 51 | Engaging welder including the hire charges welding set and helper for mislaneous welding works at site LMR |
| 52 | Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock isdamaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 53 | providing and laying in position cement concrete of specified grade including curing but excluding cost centtring and shuttering ..all work upto plinth level 1:3:6 (1cement:3course sand :6 graded stone aggregate 40mm nominal size |
| 54 | 1:2:4 (1cement:2course sand :4 graded stone aggregate 40mm nominal size |
| 55 | Demolishing reinforce cement concrete manually/by mechanical means including disposal of unserviceable f material within 50 meters lead as per direction of Engineer-incharge. |
| 56 | Demolishing brick work manually/by mechanical means including disposal of unserviceable f material within 50 meters lead as per direction of Engineer-incharge: in cement mortar |
| 57 | Reinforced cement concrete works in wall (any thickness) including attached plaster s ,butresses,plinth and string courses ,fillets column ,pillars ,piers ,abutments ,posts and struts upto five level including curing but excluding the cost of centering and shuttering ,finishing and reinforcement with 1:1.5 :3(1cement:1.5 course sand:3graded stone aggregate 20mm nominal size |
| 58 | centering and shuttering including strurting ,proping etc removing of form for shelves |
| 59 | steel reinforcement for R.C.C. work including straightening,cutting,bending ,placing in position and binding all complete upto plinth level 5.22.4 |
| 60 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)including extra for upto five floor |
| 61 | Extra for brickworkwith common burntclay bricks/cement concrete bricks in superstructurre above plinth level upto floor five level. |
| 62 | half Brick masonary with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand )upto plinth level |
| 63 | Extra for half brickworkwith common burntclay bricks/cement concrete bricks in superstructurre above plinth level upto floor five level.(6.15.2) |
| 64 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.10.2.2 Welded |
| 65 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 66 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 67 | providing and fixing of powder coated sheet for various works LMR |
| 68 | providing and fixing PVC sheet for partition works LMR |
| 69 | Providing & fixing water closet squatting pan (Indian type W.C.pan) with 100 mm sand cast Iron P and S trap, 10 liter low level white PVC flushing cistern, including flush pipe (of approved make) with manulaay cantrolled device ( handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and wherever required: white vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests |
| 70 | Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid , 10 ltr low level white P.V.C flushing cistern, including flush pipe with manually controlled device , conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required WC Pan with ISI Marked white solid plastic seat and lid |
| 71 | Providing and fixing wash basin with C.I brackets , 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:white viterous china flat back wash basin size 450x300mm with single 15mm C.P brass pillar tap 18.7.7 |
| 72 | Providing and fixing white viterous china pedestal wash basin completely recessed at the back for the reception of pipes and fittings18.9 |
| 73 | Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm |
| 74 | providing and fixing of PVC low level flushing cistern with manually |
| 75 | providing and fixing CP brass single lever telephonic wall mixer of quality and make as approved by E.I.C. 18.22.13 |
| 76 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 77 | Providing and fixing of PTMT waste coupling 31mm (18.69) |
| 78 | Providing and fixing of PTMTwaste coupling 38mm |
| 79 | providing and fixing SS soap case LMR |
| 80 | Providing and fixing SS towel rail complete LMR |
| 81 | Providing and fixing SS towel ring complete LMR |
| 82 | providing and fixing glass shelfs with bracket single set (18.33) |
| 83 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work- exposed on wall (medium). 15mm nominal bore |
| 84 | 20mm nominal bore |
| 85 | 25mm nominal bore |
| 86 | 32mm nominal bore |
| 87 | 40mm nominal bore |
| 88 | 50mm nominal bore |
| 89 | providing fixing of brass bib cock of approved quality 15mm dia |
| 90 | 20mm nominal bore |
| 91 | providing and fixing of ball valve (brass) of approved quality .high or low pressure with plastic floats 15mm nominal bore |
| 92 | 20mm nominal bore |
| 93 | 25mm nominal bore |
| 94 | providing and fixing CP brass shower rose with 15mm or 20mm inlet 100mm dia |
| 95 | providing and fixing unplasticized PVC coneection pipe with brass unions 15mm nominal bore : 30cm long |
| 96 | 45cm long |
| 97 | providing and fixing of 15mm nominal bore CP brass short body bibcock (cera,hindware,jaguaar)LMR |
| 98 | providing and fixing of 15mm nominal bore CP brass long nose bibcock (cera,hindware,jaguaar)LMR |
| 99 | providing and fixing of 15mm nominal bore CP angle valve (cera,hindware,jaguaar)LMR |
| 100 | providing and fixing pillar cock (cera jaquar)LMR |
| 101 | providing and fixing 15mm nominal bore of standard back type CP brass close hole basin mixer pillar tap of approved quality (cera,hindware,jaguar) |
| 102 | providing and fixing 15mm nominal bore standard CP brass wall mixer in kitchen and bathroom of approved quality (cera,hindware,jaguar)LMR |
| 103 | providing & fixing of PVC flexible type waste pipe for sink and wash basinLMR |
| 104 | providing & fixing of CP greating in kitchen and bathroom LMR |
| 105 | providing &fixing of PVC Pipes for drainage ,severage,rain water flow pipe etc including labour &material costs complete job in all heights(LMR) 4' dia |
| 106 | 3\\" dia |
| 107 | 6'' dia |
| 108 | Chequerred precast cement concrete tiles 22mm thick in footpath andcourtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing completeon 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse,dark shade using ordinary cement |
| 109 | maintence of existing chequered /onyx tile by replacing damaged tiles with new one joints filling with cement grout (colour pigment matching with tile and colouring etc,including cost of labour and material LMR |
| 110 | providing and fixing ACP sheet 4mm thick LMR |
| 111 | providing and fixing of PVC water tank lids(cover) to cover the top of water tank LMR |
| 112 | threaded PVC tank cover LMR |
| 113 | shifting of debries /mulba from roof ,stairs momties and adjoining area of blocks to the dumping sites by engaging labours |
| 114 | providing and fixing of almunium frames for balconies &partion in existing rooms complete job .including the cost of material and labour . LMR |
| 115 | providing and fixing of phase for repair of CP mixe/ bib cocks (plain) LMR |
| 116 | providing and fixing of phase for repair of CP mixe/ bib cocks (disk) LMR |
| 117 | providing and fixing of CP cup for repair of CP mixe/ bib cocks (plain) LMR |
| 118 | providing and fixing of CP cup for repair of CP mixe/ bib cocks (disk) LMR |
| 119 | proving and fixing washer for repair of brass bibcock LMR |
| 120 | carpenter 2nd class |
| 121 | unskilled labour |
| 122 | skilled labour |
| 123 | plumber |
| 124 | helper for plumber |
| 125 | providing and fixing central hole mixtureof jaquar cera eq brand |
| 126 | providing and fixing of sink mixtureof jaquar cera eq. brand. |
| 127 | engaging trolley for shifting of mulba from site to beyond the muncipality limit including loading and unloading LMR |
| 128 | providing and fixing of wooden frame with iron guage mesh for ventilation in kitchen and bathroom including cost of labour and material |
| 129 | SLIDING CHANNEL 20'' |
| 130 | SLIDING CHANNEL 25MM |
| 131 | P/F OF TOUGHEN GLASS COMPLETE FITTING AND STEEL ACCESSORIES. 8mm thick |
| 132 | 5mm thick |
| 133 | providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying (a)after surface preparation ,frst layer of cement @0.488 kg/sqm mixed with water proofing cement compound @0.253kg/sqm(b)laying second layer of fibre glass cloth when the first layer is still green .Overlps of joints of fiber cloth should not be less than 10cm.(c)third layer of 1.5mm thickness consisting of slurry of cement @1.289kg/sqm mixed with water proofing cement compound @0.670kg/sqmand coarse sand @1.289kg/sqm. this will be allowed to air cure for 4 hours following by water curing for 48 hours .the entire treatment will be upto 30cm on parapet wall and tucked into groove in parapet all around |
| 134 | providing and fixing of PVC panelling on walls 8 to 10 mm thick inc, all fitting and fixtures complete (wall affair or any equvl. Make) |
| 135 | providing and fixing wall paper or required colour shade and design of standard make as directed by the EIC |
| 136 | SS HANDLES 12'' |
| 137 | SS HANDLES 10'' |
| 138 | SS HANDLES8'' |
| 139 | Providing / fixing polycorbonate sheet including wastage of 02mm thick (50 Micron) complete job |
| 140 | Providing / fixing polycorbonate sheet including wastage of 10mm thick (50 Micron) complete job |
| 141 | Providing and fixing of modular kitchen accessorles of approved specification incl carriage and fixing complete. SS Multi purpose basket 15''x20''x4'' |
| 142 | SS Multi purpose basket 15''20''x6'' |
| 143 | SS Multi purpose basket 15''x20''x8'' |
| 144 | SS Multi purpose basket 15''x20''x12'' |
| 145 | SS masnal pullout 15''x18''x18'' |
| 146 | SS Cuttlery basket 15''x20''x4'' |
| 147 | SS Thali basket 15''x20''x18'' |
| 148 | wooden flooring 8mm thick |
| 149 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 150 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 151 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 152 | Providing and fixing of water proof flush door 34 mm with 1.0mm th. Sunmica (green,century or equivalent make) on both sides incl. lipping, paining, all accessories like hinges, tower bolts ,lock(harrison , godrej) handle complete |
| 153 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. (weighing not less than 10 kg/sqm) |
| 154 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class deodar wood. |
| 155 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 156 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 157 | Providing and fixing of Brass/ ss finished door lock of approved brand and make as directed by EIC |
| 158 | Providing and fixing of laminate finish vanity incl wastecoupling etc complete job |
| 159 | Supply, installation, Commissioning and Testing of Auto on/off Pressure Pump 1HP CG Tank 24 ltr of approved Make (Crompton/ kirloskar/servo/ Havells) and specification as approved by Engineer in charge incl all fixtures/fittings complete Job |
| 160 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20% |
| 161 | Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor: |
| 162 | Treatment of points of contact of wood work with chemical emulsion Chlorophriphos /Lindane E.C. 20% with 1% concentration (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same |
| 163 | Providing and fixing 4mm thickness APP Superthermoly STP sheet (polyester-based sheet with black finishing, including two coats of silver-colored paint) with hot torch treatment over RCC/cemented surfaces shall be done as follows: (i) Apply Shalitex STP primer for bitumen membrane at 0.40 liters per square meter. (ii) Lay the 4mm thickness APP Superthermoly STP sheet (polyester-based sheet with black finishing, manufacturer density at 25°C of 0.87-0.89 kg/liter) over the primer-coated layer using a butane torch and seal all longitudinal and transverse joints to prepare the surface completely. (iii) Cut a 1-inch deep groove above the roof surface on the parapet wall and seal the edge of the APP Superthermoly STP polyester sheet into the groove with polymer-modified mortar. (iv) In case of low-height parapets, terminate the APP Superthermoly STP polyester sheet over the parapet. (v) For overlapping joints, rub the polyethylene side of the membrane with a wire brush, apply Shali Bond APP over the rubbed area, allow it to become tacky, and fix the bituminous side of the APP Superthermoly STP polyester sheet using hot application. (vi) Ensure an overlap of 75mm for longitudinal joints and 100mm for transverse joints. The vital physical and chemical parameters of the membrane shall be as follows: softening point not less than 150°C; cold flexibility up to 0°C as per ASTM standards; joint strength at 23°C as 350 N/5cm in the longitudinal direction and 300 N/5cm in the transverse direction; tear strength of 60 N in the longitudinal direction and 80 N in the transverse direction. The roll weight for a 4mm thick sheet (1 meter x 10 meters) shall be 40 kg. The laying of the membrane must be carried out by a certified applicator (certificate to be attached). A single coat of aluminum paint shall be applied on top to complete the job as per the direction of the Engineer-in-Charge (E.I.C.). |
| 164 | Providing and fixing white viterous china flat back wash basin wash basin with pedestal including, 15mm C.P brass centr hole basin mixer, 32mm C.P brass waste coupling of standard pattern, including all fittings and fixtures of make jaquar, cera or eq as directed by EIC |
| 165 | Providing and fixing of kitchen chimney having suction 1350 cmh , filterless auto clean,motion sensor incl. cuttinh hole in wall for outlet and making good the surface with painting complete make-faber,elica,hindware,glen |
| 166 | Providing and fixing of gas stove electrically/battery operated Easy to clean, toughened black glass top extra strong pan support stainless steel drip tray revolving inlet nozzle Fuel efficient brass burner extra strong pan support stainless steel drip tray Cooktop with 4 burner including making hole in shelf and wall for making provision of fixing of gas cylinder outside kitchen incl. cost of pipe and other required fittings complete job make-faber,elica,hindware,glen, Please Enable Macros to View BoQ information |
