|
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws incl Dismantling of corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws incl Dismantling of plain steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specireid and directed. |
| 3 | M&L for wind ties made of flat iron of size 40mm x 5mmthick over roof sheet fixed with suitable arrangements including securing bolts; complete all as specireid and directed. |
| 4 | M&L for wrought Second class hard-wood in scantlings frame work incl Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work, complete all as specireid and directed. |
| 5 | M&L for Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps including dismantling of old boarding, complete all as specireid and directed. |
| 6 | S&F 15mm thick second class hardwood boarding as in ceiling planed one side, with butt joints and fixed with nails including beading, filltets, cornices etc., complete all as specified and as directed. |
| 7 | M&L 6mm thick Non Asbestos fibre cement /Pre Laminated self embosssed texture designer board E-Board classic size 595x595mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 2-3 mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip incl Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 8 | M & L for 9mm thick plywood, grade BWR fixed with screws to frame work as in false ceiling including dismantling of old boards, complete all as specified and directed. |
| 9 | S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 including dismantling and making good surface matching with exiting surface, complete all as specified and directed. |
| 10 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 11 | S & F in repair 20mm thick designer eaves board as in edges of roof covering incl all scaffolding, fixing and accessories as required onsite, design as approved including dismantling of old boards, complete all as specified and directed. |
| 12 | Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each, complete all as specified and directed. |
| 13 | Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed. |
| 14 | M & L for 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 15 | M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated including suitable nos of handles, towerbolt, sliding door bolt and hinges, complete all as specified and as directed |
| 16 | S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including suitable nos of handles, towerbolt, sliding door bolt and hinges, complete all as specified and as directed |
| 17 | S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares/rectangular window pane n.exc 0.5 sqm in each panes etc., complete all as specifiedand directed |
| 18 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc., complete all as specified and directed. |
| 19 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 20 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 21 | S/F aluminum anodized, barrel tower bolt of extruded section 200mm long, ISI marked, complete all as specified and as directed. |
| 22 | S/F 150 mm long, extruded aluminium alloy handle, fabricated type, complete all as specified and as directed. |
| 23 | S/F 100mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 24 | M&L for 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work including dismantling, complete all as specified and as directed. |
| 25 | M&L Vitrified Ceramic tiles 8 mm thick dark shade(square/ rectangular) , polished, area of each tiles not exceeding 0.36 sqm, as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 26 | M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all specified and directed. |
| 27 | M&L coloured glazed ceramic tilessurface 450x 300x 7mm thick as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 28 | M & L for rendering 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and smoothwithout using extra cement including taking down cement plaster all as specified and directed and removing the debries out side MoD land, complete all as specified and directed. |
| 29 | M&L Preparation of newly plastered wall surfaces by using 2 mm thick white wall care putty to obtain smooth/ even finish surface using sand paper and applying two coats of oil bound dismater over a coat of primer, complete all as specified and directed. |
| 30 | M/L for 15mm thick rendering in on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and fair,including taking down plaster complete all as specified directed and removing the debries out side MoD land, complete all as specified and directed.Note :-(i) Work is to be executed in Bldg upto and including 3 storeys |
| 31 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surfaces including and over 2 mm thick white wall care putty to obtain smooth/ even finish surface using sand paper, complete all as specified and directed.Note :(i) Work is to be executed in Bldg upto and including 3 storeys |
| 32 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc including demolition of old brick work, complete all as specified and directed. |
| 33 | M&L for Preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Note :(i) Work is to be executed in Bldg upto and including 3 storeys |
| 34 | M&L for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. (Bldg upto and including 3 storeys) |
| 35 | M & L for 18mm thick granite (of any type) work (table rubbed and polished and moulding) in platforms, steps, jambs, pillar, counter WHB, floor over and including 20mm thick in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite,including nosing of edges as required, complete all as specified and directed. |
| 36 | M/L for machine cut, pre polished (Granite finish) kota stone flooring 18-20 mm thick in steps (Trades and riser) in single piece set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed with grey cement laid over and including cement screed bed 20mm thick in cement mortar (1:4) for landing and 10mm thick cement plaster in CM (1:3) and including edges moulding, complete all as specified and directed.Note:- All exposed surface shall be round/bull nosed to aminimum radius of 5mm and two parallel grooves ten by ten( 10mm x 10mm ) immeadiately behind the noising shall be provided and cost of the same is included in the rates quoted by the contractor |
| 37 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 38 | M & L for 75mm thick PCC 1:4:8 Type D-2(using 40mm graded crushed stone aggregate) as in sub base over rammed earth, complete all as specified and as directed. |
| 39 | M&L for rubber moulded coloured chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments over 20mm thick screed bed or bedding layer in cement mortor (1:6) set , jointed and pointed in neat cement slurry complete all as specified and directed. |
| 40 | S&F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc., complete all as specified and directed. |
| 41 | S&F 15mm bore GI tubing (medium grade) with all fitting and fixed to wall and ceiling and including taking down old tubing complete all as specified and directed. |
| 42 | S&F 20mm dia GI tubing (medium grade) with all fitting nd fixed to wall and ceiling and including taking down old tubing, complete all as specified and directed. |
| 43 | S/F 10 litre capacity, low level, virgin polypropylene cistern, ISI marked, coloured complete with PVC bend/flush pipe and making all connection including taking down existing high or low level unerviceable flushing cistern and making good the disturbed surface to match with the existing surface, complete all as specified and as directed. |
| 44 | Supply and fixing vitreous china wash hand basin white flat back of size 550x400mm with padestal including securing with two No fast nuts minimum 100mm long and supporting CI brackets embedded in wall with PCC (1:2:4) type B0 using 12.5mm coursed aggregates including all fittings and fixtures like, PVC waste pipe, PVC connections and chromium plated waste coupling, etc fixed in repair, complete all as specified and directed. |
| 45 | S/F vitreous China squatting pan of Orissa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including lime concrete, making good to disturbed surface of sub base and flooring with the existing surface and connection to flush pipe fixed in repair, complete all as specified and directed. |
| 46 | S&F in repair vitreous china wash down water closet (Pedestal pattern) white complete including connections to drain pipe and to flushing pipe, antisyphonage pipe , etc., complete all as specified and directed. |
| 47 | S&F Plastic water closet seat,white/off white or approved colour , closed pattern with flat bottom, and cover and mild steel chromiumplated or aluminised hinging device Seat and cover for pedestal pan, complete all as specified and directed. |
| 48 | S&F in repair Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube stainless steel with wall hook including making connections and fixed in position, complete all as specified and directed |
| 49 | S/F shower rose chromium plated of 125mm size with swivel joints incvl, fixing to steel puipe or union of 15mm bore, fixed in repairs, complete all as specified and directed. |
| 50 | S/F in repair bib tap screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union , complete all specified and directed. |
| 51 | S/F in repair, angle cock, 15mm dia chromium plated, cast copper alloy, fancy type, ISI marked, screwed down, high pressure with capstan head, screwed both ends for iron pipes or for unions, complete all as specified and directed. |
| 52 | S/F in repair brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges , complete all as specified and directed. |
| 53 | S/F In repairs for Corner Glass shelf 300x300 mm (Big) 225 x 225 mm(medium) &150x150 mm (small) three set, complete all as specified and as directed. |
| 54 | S/F glass shelf assembly consisting of glass shelf, 60cm long and 12 cm wide with CP bracket and guard railing fixed in repair, complete all as specified and directed. |
| 55 | S/F in repair PVC connections 600 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed. |
| 56 | S/F 450mmx600mm size and 5.5mm thick looking mirror of selected quality, beveled edge glass mounted on 6mm thick AC building board with aluminium beading and rubber packing and fixed to wall with wooden plug with chromium plated brass screw and cup washer fixed in repair complete, complete all as specified and directed. |
| 57 | S/F in repair stainless steel sink 1.00mm thick, ISI marked for kitchen with plug, waste PVC pipe, washers including cantilever cast iron brackets connecting union waste pipe of size 485 mm x 410 mm with bowl size 410 mm x 350mm x 20 mm etc fixed in repair complete all directed. |
| 58 | S/F in repair Sink mixer 2 in 1, chromium plated, fancy type with capstan head handle, screwed down high pressure with lettered hot and cold including CP brass flange and necessary extension nipple screwed for 15 mm dia pipe complete all as specified and directed. |
| 59 | S&F in repairs 15mm bore Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures, complete all as specified and directed. |
| 60 | S/F in repair brass chromium plated swan neck, hot and cold central hole, basin mixer for mixing hot and cold water, fancy type with capstan head handle, screwed down high for 15mm bore pipe or union fixed in repair, complete all as specified and directed. |
| 61 | S/F in repair stainless steel plate rack 1mm thick of size 600 x 900 x 250 mm with stainless steel screw to wall, complete all as specified and directed. |
| 62 | S& F in repair PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate of 110 mm dia etc complete all as specified and directed. |
| 63 | M&L for cement concrete type C-1 1:3:6 (using 20mm graded agg) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25, complete all as specified and directed. |
| 64 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls and including taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 65 | S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls and including taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 66 | S&F PVC(SWR) bends any radius 110mm, complete all as specified and directed. |
| 67 | S&F PVC(SWR) bends any radius 75mm, complete all as specified and directed. |
| 68 | S&F PVC(SWR) 'S' trap any radius 110mm, complete all as specified and directed. |
| 69 | Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished , and reforming benching as required, complete all as specified and directed |
| 70 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4, including demolition of old pointing surfaces, complete as specified and directed. |
| 71 | S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window), complete all as specifeid and directed. |
| 72 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit, complete all as specified and directed. |
| 73 | M&L for making point wiring system with single runs of PVC insulated FRLS wire , 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) any type of lengthy drawn through in heavy duty PVC casing capping / PVC conduit of suitable size along with its all connected fittings accessories including providing of suitable type/size of modular pressed steel terminal sunken boxes or PVC flush type box and dully fixed it concealed in wall or surface on wall (type of wiring fixing/laying work to be carried out at site as per decided & direction of EIC) and providing alongwith modular type back and face top covered plate frame for housing / mounting of switches sockets, regulators etc and also using /drawind of 1.5 sqmm PVC insulated FRLS wire , 1100 Volt grade with multistranded copper conductor wire used as a continuous earth wire which is connected with terminated the box to ceing rose / fitting complete and including making good to all disturbed surfaces of wall/ceiling , wall panel and floor area of wiring system and to match the existing surface of wall/floor/ceiling etc., comple all as specified and directed for the following:- |
| 74 | One light point / fan/bell point controlled by one switch of one way point wiring system, complete all as specified and as directed. |
| 75 | One 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system , complete all as specified and as directed. |
| 76 | One 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system , complete all as specified and as directed. |
| 77 | Description all as per serial item No 73 here-in-before, but using single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) (ISI Marked) for15 Amp socket outlet point wiring system with controlled by one way switch and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire, complete all as specified and directed. |
| 78 | Supply and fixing of modular type switch of 5/6 Amps 220 Volts AC, one module, complete all as specified and directed. |
| 79 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed. |
| 80 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed. |
| 81 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed. |
| 82 | Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body, complete all as specified and directed. |
| 83 | Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb, complete all as specified and directed . |
| 84 | Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know, complete all as specified and directed. |
| 85 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, comlplete all as specified and directed. |
| 86 | S&F recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36/37 Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete set providing of suitable type of flat flexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting, complete all as specified and directed. |
| 87 | Supply and fixing of surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 88 | Supply and fixing surface mounted LED bulk head luminaries light fitting of rated capacity 10W including LED lamp & driver suitable used for out door type with dust and water proof with energy efficient complete and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 89 | Supply and fixing of LED street light fitting of rated capacity 35Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting thefitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and makong electric connection, complete all as specified and directed. |
| 90 | Supply & fixing of ventilating exhaust fan made out of mild Metal body, complete with louvers,and shutter operational of size 300 mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall Including takind down of existing fan, compete all as specified and directed. |
| 91 | Supply & fixing of ventilating exhaust fan made out of mild PVC body, complete with louvers,and shutter operational of size 300 mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall Including takind down of existing fan, compete all as specified and directed |
| 92 | S&F star rated electric wall mounted fan 400 mm sweep of single phase 230 volt AC with having pull cord oscillating type single piece AS blade, three speed pull cord control complete with blade and guard framing support & connecting accessories and fixed/grouting on wall/roof with MS fastner, nut & bolt including providig flate flexible copper wire and making all electrical connection, complete all as specified and directed. |
| 93 | Taking down existing 1200 mm sweep ceiling fan from ceiling including disconnecting wiring, dismantling complete fan body, supplying and fixing new fan body/casing with necessary screws, nuts, bolts, down rod, shackle, canopy & rewinding motar etc. including re-assembly of existing motor and blades, connection, testing, commissioning and refixing at original position complete all as specified and directed. |
| 94 | S & F Storage type Water heater (Geyser) 5 STAR of Cap 25 Ltrs working on 230 volts AC supply with in and out going water connection pipe (Hot & Cold) fixing arrangement with nut bolts and making good the disturbed surface, complete all as specified and as directed. |
| 95 | Supply and fixing of sheet metal enclosure duly powder coated with double pole and neural enclosure with a two pin and earth plug and top and having mounting chanel and complete with one 01 MCB SP 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed on wall and making good the disturbed wall surface, complete all as specified and directed . |
| 96 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 4 way type 220 volt AC supply system and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 97 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 98 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 99 | Supply and fixing of MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed. |
| 100 | S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed. |
| 101 | S&F in replacement sub main wiring with two Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 16 sqmm 3 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. |
| 102 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 04 Sqmm and 1 Run of 04 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note: 3 runs of 4 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 103 | S&F in replacement sub main wiring with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire single core of size 2 runs of 6 Sqmm and 1 run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed in wall or surface on wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed.Note: 3 runs of 6 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 104 | M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate with XPM (weight not less than 4 Kg/Sqm) with top concrete pit cover and handle for lifting of cover, complete work all as specified and directed . |
| 105 | Supply and fixing of rigid non metalic PVC conduit of size 20/25 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangment for holding of pipe on wall in proper size of clamps, nut bolt ,and washer etc complete all as specified.and directed. |
| 106 | Supply and fixing of GI earth countinuity earthing lead of size 4 mm dia bore galvanised iron or steel wire with all fitting dully laid in trenches/ wall including providing clamping arrangment for holding on wall in proper size of clamps, nut bolt ,and washer etc complete all as specified.and directed. |
| 107 | Notes :-An amount of Rs 1,31,383.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
