Tender For Addition Alteration And Special Repair To Certain Officers, Jcos And Or Md Accommodation At Pangode Mil Stn Under Ge (Army) Trivandrum, Trivandrum-Kerala

TDR : 55897666

Tender Notice
BOQ

26 Days Left

Trivandrum , Kerala

Tender Brief : Tender For Addition Alteration And Special Repair To Certain Officers, Jcos And Or Md Accommodation At Pangode Mil Stn Under Ge (Army) Trivandrum

Document Fees
₹ 2000 /-

EMD
₹ 549650.0 /-

Tender Value
₹ 4.74 Crore /-

Submission Date
06-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE WELLINGTON NAME OF WORK: ADDN/ALTN AND SPECIAL REPAIR TO CERTAIN OFFICERS, JCOs AND OR MD ACCN AT PANGODE MIL STN UNDER GE (ARMY) TRIVANDRUM Contract No: CWE/ WEL/ OF 2025-26 Bidder Name : SCHEDULE 'A' (BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item of Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder including all Taxes etc.Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category Total amount TOTAL AMOUNT With Taxes Total amount in words
2	Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and removing debris from site of work complete all as directed by the Engr-in-Charge
3	Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as directed by the Engr-in-Charge.
4	M & L for 20 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring and sub-base as levelling concrete complete all as specified and directed.
5	M & L for joint free non-skid, ceramic, coloured tiles 7 to 8 mm thick, premium quality (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm (1st quality) conforming to IS-13755, in floors etc, and set & joint in neat cement slurry, jointed and pointed in white or coloured cement to match the surface of the tile over and including 20 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.
6	M & L for joint free non-skid, ceramic, coloured tiles 7 to 8 mm thick, premium quality (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm (1st quality) conforming to IS-13755, as in vertical surfaces such as riser of steps, skirting, dado, etc and set & jointed in neat cement slurry, jointed and pointed in white cement or coloured cement to match the surface of the tile overand including 10 mm thick bedding in cement mortar 1:3 and necessary cutting of tiles complete all as specified and directed.
7	M & L for joint free Vitrified ceramic tiles, dark shade/ double charged/ ultracharged, 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.00 Sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of the tile over and including 20 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.
8	M & L for joint free Vitrified ceramic tiles, dark shade/ double charged/ ultracharged, 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.00 Sqm, as in vertical surfaces such as riser of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of the tile over and including 10 mm thick screed bed in cement mortor 1:3 complete all as specified and directed.
9	M & L for joint free non-skid ceramic coloured tiles, 7 to 8 mm thick, premium quality conforming to relevant IS (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry, jointed & pointed in white or coloured cement to match the surface of the tile over and including 20 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.
10	M & L for 450 x 350 mm or higher size, 7 mm thick coloured glazed ceramic tiles, fixed as in vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering over fair surfaces of brick work or concrete surfaces in cement mortor 1:3 finished even and rough complete all as specified and directed.
11	M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick premium quality conforming to relevant IS (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 20 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.
12	M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
13	M & L for 20-25 mm thick Machine cut kota stone slab in single peice for full length of step as in treads of staircese and as in flooring, edge moulding as in steps and three rows grooves of 2mm wide and 3mm deep in each landing/treads with 25 mm spacing near the nosing edge laid over and including 20 mm thick screed bed in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing to mirror finish and rounding to edges etc complete all as specified and directed.
14	All as per Serial item No. 12 above but 20-25 mm thick kota stone slab as in skirting/riser laid over and including 10 mm thick screed bed in cement mortar (1:4) complete ditto
15	M & L for Rounding to edges of stone (granite) slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
16	M & L for Mirror polishing on granitestone work where ever required to give high gloss finish complete all as specified and directed.
17	M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
18	M & L for 75 mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection /path laid to slope of 1 in 12 and finishing the cement concrete surface even and smooth without using extra cement with and inlcuding all necessary form work to divide the area in panels, finished exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.
19	M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.
20	M & L for Plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in surface channel, drains etc including necesssary form work complete all as specified and directed.
21	Extra for forming fair finished to concrete surface of drain 22.5cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed.
22	Demolition of cement Concrete on Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
23	M & L for 25 mm thick (average), plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in roof as levelling course laid in slope complete all as specified and directed.
24	M & L for rendering 10 mm thick in cement mortar 1:3 on roof surfaces mixed with integral water proofing compound as per manufacturer's instructions or 200 ml per bag of cement and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item)
25	M & L for water proofing treatment over RCC slab by applying oil bound bitumen primer @ 0.27 Ltr/Sqm; provide and laying 4 mm thick APP modified membrane not less than 4.5 Kg/Sqm, reinforced with non woven polyster matt weighing not less than 160 gm/Sqm having softening point not less than 140 degree centrigrade, longitudinal tensile strength not less than 650 N/Sqcm, tearing strength of 180 N, a static puncture resistance of 180, keeping minimum 10cm side overlap and 15cm end overlap and applying by torch application over a coat of blown grade hot bitumen grade VG-10 conforming to IS-702 heated to a working temperature of 180 centrigrade and applied @ 1.2 Kg/Sqm of the surface area and finishing the top surface with solar reflective bitumenous aluminium paint @ 0.1 Ltr/Sqm complete all as specified and as directed by the Engr-in-Charge (Note: (i) Water proofing treatment shall be carried out through an authorised applicator/authorised specialist agency of the manufacturer, who shall further have to rectify any defects (if any) at a later stage(ii) The water proofing treatment work shall have 10 years of guarantee period from the date of completion of work and the contractor has to submit certificate for the same)
26	Taking up or down 15mm bore steel tubing and connections and removal from site complete all as directed.
27	Taking up or down 20mm bore steel tubing and connections and removal from site complete all as directed.
28	Taking up or down 25 or 32 mm bore, steel tubing and connections andremoval from site complete all as directed.
29	M & L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.
30	S & F 15 mm bore Unplasticised PVC pipes of Pressure rating 10 Kg/Sqcm fixed complete to walls, ceilings or in floors etc (upto four storiy building) complete all as specified and directed.
31	S & F 20 mm bore Unplasticised PVC pipes of Pressure rating 10 Kg/Sqcm fixed complete to walls, ceilings or in floors etc (upto four storiy building) complete all as specified and directed.
32	S & F 25 mm bore Unplasticised PVC pipes of Pressure rating 10 Kg/Sqcm fixed complete to walls, ceilings or in floors etc (upto four storiy building) complete all as specified and directed.
33	S & F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
34	S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
35	S & F in repair 25 mm bore, gun metal, globe or Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
36	S & F in repair 25 mm outer dia CPVC tank adaptor complete all as specified and directed.
37	Demoltion of Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed by the Engr-in-Charge.
38	M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed.
39	Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed
40	M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair complete all as specified and directed.
41	M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primerand over 2mm thick of plaster of paris putty to a smooth surface complete all as specified and directed.
42	Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall and preparation of new surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint over 2mm thick plaster of paris putty to a smooth surface complete all as specified and directed.
43	M & L for rendering 5mm thick in cement mortar 1:4, mixed with integral water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and fair without using extra cement over 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).
44	Supply only liquid water proofing compound complete all as specified and directed.
45	Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
46	Material & Labour for complete removal of existing treatment, preparation of surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
47	M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as on ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
48	Removing loose and broken concrete/masonary surfaces by chiseling/ mechanically etc from the roof slab, column, beam and similar structural members, cutting edges, cleaning the dismantled portion with wire bush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and removing the debris upto a distance of 100m from the site complete all as specified and directed.
49	M & L for applying polymer based rust-remover (pH value-12) and applying polymer based rust preventive ( pH value-9) to exposed reinforced bars complete all as specified and directed. (Make: FOSROC/Pidilite Industries/STP or equivalent approved make as per list of manufacturer)
50	M & L for applying one coat of epoxy bonding coat as per manufacturer's instructions to bind with old concrete/wall surfaces of soffit of slab, column, beam and similar structureal members for new cement surfaces complete all as specified and directed. (Make: M/S FOSROC or equivelant make as per List of manufacturer's)
51	M & L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on gunited surfaces duly mixing polymer modified bonding materials such as 'Nito Bond AR' of FOSROC Chemicals India Pvt Ltd or equivalent make as per List of manufacturer's @ 10 Litre per bag of cement and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. (Make: M/S FOSROC Chemical India Pvt Ltd or equivelant make as per List of manufacturer's)
52	M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
53	M & L for preparing old decorated surfaces of ceiling including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed.
54	Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.
55	Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.
56	Resecuring or easing & adjusting without taking down the shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.
57	Providing and fixing factory made uPVC white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+/-0.2)mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
58	Providing and fixing factory made uPVC white colour Sliding window Three track of Area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm); Window profile with hollow section with multi chamber; Frame (88mm x 52mm), sliding sash (42mm x 67mm); Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware; EPDM gasket, 1.2(+/-0.2)mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system; Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured lor payment purpose.)
59	Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).(Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)
60	S & F 4.8 mm thick, sheet glass, ordinary quality and securing in window in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.
61	S & F 5 mm thick, figured glass, pin headed type and glazing with oil putty/glazing clips, in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.
62	S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
63	M & L for Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
64	M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.
65	M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.
66	S & F 40 mm thick, factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
67	Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.
68	S & F 35 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified and directed.
69	S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
70	Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.
71	S & F 30 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified.
72	S & F 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
73	S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
74	Hacking out old broken glass exc 1.5 Sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
75	S & F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
76	M & L for Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall bemeasured) complete all as specified and as directed.
77	S & F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
78	Taking down shutter of any descriptions n. exc 1 sqm each and Refixing in the same opening after carry out necessary easing and adjusting complete all as specified and directed.
79	S & F Powder coated (minimum 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed.
80	Providing and fixing Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed.
81	S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
82	S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed.
83	S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
84	M & L for 18-19 mm thick PVC solid foam board with laminate finish, termite and water proof, all edges sealed with 0.8 mm thick PVC edgeband fixed with screws used for cupboards and kitchen base and cabinet boards complete all as specified and directed.
85	S & F stainless steel, 304 Grade, soft close auto hinge, 3-way adjustable and 35 mm cup diameter with full overlay suitable for 18-20 mm thick shutter fixed with screw complete all as specified and directed.
86	S & F stainless steel (304 Grade) perforated curtlery basket of size 370x420x520 mm with necessary fixing arrangement and rolling facilities complete all as specified and directed. (Make: Hettich/Godrej or equivalent approved make as per list of manufacturer)
87	S & F stainless steel (304 Grade) perforated thali plain basket of size 370x385x180 mm with necessary fixing arrangement and rolling facilities complete all as specified and directed. (Make: Hettich/Godrej or equivalent approved make as per list of manufacturer)
88	S & F stainless steel (304 Grade) bottle basket pull out of size 6\\"x20\\"x18\\" with necessary fixing arrangement and rolling facilities complete all as specified and directed. (Make: Hettich/Godrej or equivalent approved make as per list of manufacturer)
89	S & F Stainless steel, 304 Grade soft close telescoping channel, 20 inch long, heavy duty of approved make fixed with screws complete all as specified and directed.
90	S & F 100 mm size, stainless steel suitable for kitchen cabinet of approved make complete all as specified and directed.
91	S & F 150 mm size, stainless steel suitable for cupboard of approved make complete all as specified and directed.
92	S & F Second class hardwood, Small fittings such as brackets of any type, latch & hinge blocks, shaped door & window stops and the like, including all necessary labours; articles n.exc. 200 cu.cm each complete all as specified and directed
93	S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
94	S & F in repairs 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
95	S & F 50 mm size, butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed.
96	S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
97	S & F in repairs 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
98	S & F 150 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.
99	S & F in repair 150 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.
100	S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
101	S & F in repair 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
102	S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and directed.
103	S & F in repair Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and directed.
104	S & F 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed.
105	M & L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
106	S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
107	S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
108	S & F in repairs, 15 mm bore, Stop/angle valves, fancy type cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
109	S & F in repairs, 15 mm bore, Stop valves, fancy type, cast copper alloy, chromium plated with long shank and cup, concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
110	S & F in repairs, 32/40mm dia flexible PVC waste pipe, 800mm long for wash basin/sink etc complete all as specified and directed
111	S & F in repair 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
112	S & F in repair 40 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
113	S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specifiedcomplete all as specified and directed.
114	S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
115	S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), 'P' trap, white, including connection to outgoing drain and flushing pipe, anti syphonic pipe including PVC water closet seat and cover, black or white colour, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete but excluding flushing cistern & flush pipe including provn of lime concrete bedding and making good damaged/disturbed surfaces complete all as specified and directed.
116	S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.
117	S & F in repair PVC (SWR) multi floor trap, diameter of outlet 75 mm, with plain SS grating with/ without hole including jointing with solvent cement fixed in cement concrete complete all as specified and directed.
118	S & F polished edge, 6mm thick glass mirror, silvered to give maximum reflection, free from tarnishing, discolouration, scratches and other visible defects of required height fixed to to plastered wall/ board with suitable fixing arrangement complete all as specified and directed.
119	S & F in repairs, 15mm bore, PVC connection pipe 600mm long with 02 Nos PTMT check nuts at both ends with washer etc complete all as specified and directed.
120	S & F in repairs, 15mm bore, chromium plated connections pipe, 450mm long braided hose with two Nuts & rubber washers (suitable for Geyser, basin mixer etc) complete all as specified and directed.
121	S & F CP, wall mixer fancy type, 3 in 1 system with provision for telephone shower complete with 115mm long bend pipe including taking down existing old unserviceable mixer complete all as specified and directed.
122	S & F in repairs 15mm bore, Two Way Bib Cock with Wall Flange, fancy type cast copper alloy, chromium plated complete all as specified and directed.
123	S & F in repairs, Towel Rack 600mm long with Lower Hangers, Stainless Steel including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed.
124	S & F in repair 125 mm size, Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
125	S & F in repair 15mm bore,, chromium plated shower arm, 250 mm long with flange complete all as specified and directed.
126	S & F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
127	S & F in repairs, Toilet paper holder with flat recessed type stainless steel fixed to wall with brass screw complete all as specified and directed.
128	S & F in repairs, fancy type PVC cabinet of size 450 x 300 x 100 mm of approved colour fixed to wall with necessary fixing arrangment complete all as specified and directed.
129	S & F in repair 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed.
130	S & F in repairs, stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
131	S & F in repairs, stainless steel sinks made of 1 mm thick sheet with plugs, washers and wastes including bedding in ement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
132	S & F in repairs, Stainless steel, plate rack of size 900x750x250mm of super delux model, suitable for 12 plates made with 22 gauge sheet and weight not less than 4.5 Kg and fixed to wall complete all as specified and directed.
133	S & F Stainless steel, plate rack of size 750x600x250mm of super delux model, suitable for 12 plates made with 22 gauge sheet and weight not less than 3 Kg and fixed to wall complete all as specified and directed.
134	S & F in repairs chromium plated Soap dish of standard size, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed.
135	S & F in repairs brass chromium plated towel ring round/square of standard size complete all as specified and directed.
136	S & F stainless steel wall mounted decorative type cloth hanger hooks rail with 8 hooks of size 45cm x 4cm x 1.49mm thick of approved quality, rust resistant including screws/brackets fixed complete all as specified and directed.
137	S & F in repairs, 100 mm, 4 lever, mild steel, Mortice Lock, vertical type complete all as specified and directed.
138	Cutting/cleaning small trees, saplings, shrubs and under growth complete roots from brick walls, concrete, chajjas etc including taking out complete roots from inside walls, conrete/chajjas etc all as per direction of Engr-in-Charge. (upto 4th floor buliding.)
139	S & F in repairs, Harrison rails/curtain rod/drapery rod, 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers, etc as in curtain rail complete all as specified and directed.
140	Demolition of reinforced cement concrete in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
141	M & L for use & waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizonal or sloping) for flat fair finished surfaces of concrete complete all as specified and directed.
142	M & L for RCC 1:2:4, type B-1 (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, etc complete all as specified and directed.
143	S & F high strength TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
144	M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.
145	M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.
146	M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.
147	M & L for post construction Antitermite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
148	M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete complete all as specified and directed.
149	S & F 50 mm dia, Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.
150	Demolition and breaking up to 160 mm bore drain pipes including all fittings set in cement mortar and removing the materials from site of work complete all as specified and directed
151	S & F 110 mm bore, PVC (SWR), Soil, waste and rainwater drainange pipess, single socketed, in any length with rubber ring joints, laid in trenches or in floors, etc complete all as specified and directed.
152	S & F 75 mm bore, PVC (SWR), Soil, waste and rainwater drainange pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, etc complete all as specified and directed.
153	S & F 110 mm bore, PVC (SWR), Soil, waste and rainwater drainange pipes, single socketed, in any length with rubber ring joints, fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.
154	S & F 75 mm bore, PVC (SWR), Soil, waste and rainwater drainange pipes, single socketed, in any length with rubber ring joints, fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed
155	S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
156	S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
157	S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.
158	S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.
159	S & F 110 mm bore, PVC (SWR) vent cowl complete all as specified and directed.
160	S & F 75 mm bore, PVC (SWR) vent cowl complete all as specified and directed.
161	S & F 160 mm bore, PVC (SWR), Soil, waste and rainwater drainange pipes in any length with or without ears, with cement joints, fixed to wall etc with all fixing accessories complete all as specified and directed.
162	S & F 160 mm bore, PVC (SWR) bends of any radius (equal or unequal, 90/45 degree) complete all as specified and directed.
163	S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm bore of pipe complete all as specified and directed.
164	S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore of pipe complete all as specified and directed.
165	S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 160mm bore of pipe complete all as specified and directed.
166	M & L for special treatment to sunken portion of WCs and Bath room as per following stages and all as per the direction of Engineer In Charge :(a) Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc upto 30cm depth and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc.(b) Stage 2:-Applying two coats each 1 mm thick of polymer modified cementitious water proofing coating as per IS 2645-2003 to bottom and sides up to FFL+100 mm height.(c) Stage 3:- 20 mm thick plaster in CM 1:4 mixed with integral water proofing compound as per manufacturer's instructions including forming angle fillet at junctions of size 40 mm X 40 mm using polymer modified mortar and Provide 40mm dia light grade GI spout at the lowest point with 30 cm projection beyond the outer face of the wall(d) Stage 4:- Test the Water proofed area by filled with water for atleast 72 hours and to the entire satisfaction of GE.(e) Stage 5:-Sunken portion to be filled with lean concrete 1:4:8, type D-2 (using 40mm graded aggregate)(f) Stage 6. All sewage pipe joints shall filled with mixture of cement, fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP.
167	S & F 500 litres capacity, three layered, rotational moulded polyethylene water storage tanks (three layered and Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed.
168	S & F 1000 litres capacity, three layered, rotational moulded polyethylene water storage tanks, (three layered and Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one complete all as specified in SSR Part I and directed.
169	S & F in repairs, 25 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 455 gms) complete all as specified and directed.
170	Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.
171	M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
172	M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (For manhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 including necessary form, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)
173	M & L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement mixed with water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
174	S & F 150 mm bore, PVC (SWR), Soil, waste and rainwater drainange pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and directed.
175	M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore drain pipes complete all as specified and directed .
176	M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm bore of pipe complete all as specifieed and directed.
177	S & F in repair On site LLDPE septic tank designed to carry sewage and sullage water, excavation and earth work in any type of soil , PCC 1:4:8, type D-2 (using 40mm graded aggregate) below foundation, vent shaft, connection etc, complete for 25 users complete all as specified and directed
178	M & L for construction of brick masonry soakage well of size 2.40m dia and 3.0m effective depth (internal dimension) with PCC solid block masonry wall in CM 1:4 on 300mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundation, brick bat filling around the well, 15mm thick rendering in cement mortar (1:4) internally mixed with WPC and 15mm thick rendering in CM 1:4 externally, providing RCC slab with manhole cover cover made out of M-25 (Design mix) concrete with necessary reinforcement and form work including necessary excavation & earth work in any type of soil and surface finishes including inter connecting pipe of RCC/DWC complete as specified and directed all as shown on drawing.
179	Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil complete all as specified and directed.
180	Removing excavated soil not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
181	M & L for 100 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of flooring, etc complete all as specified and directed.
182	M & L for Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, as in floors etc, including 20 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed with grey cement and pigments to match with the shade of tiles complete all as specified and directed.
183	M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified and directed.
184	ELECTRICAL WORKSTaking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.
185	Taking down unserviceable sub-main wiring (any numbers of cable) with rigid PVC/steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed.
186	M & L for Point wiring with three runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable, 1100 Volts Grade, FRLS (ISI marked) (For phase, neutral and earth) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including factory made branded make embosed metal GI steel pressed terminal boxes of suitable module flush to wall including modular white cover plate of suitable module with frame for fixing modular type switches, sockets, regulators etc. for one light/exhaust fan/fan point/call bell point controlled by one way switch complete all as specified and directed..(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) Wiring shall be carried out in proper colour i.e Red, Yellow, Blue phases, Black for neutral and green for earth(iii) Unit quoted rate is deemed to include modular metal flush boxes with modular cover plate of suitable module with frame(iv) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)
187	All as per item No. 185 above but for One light point controlled by two Nos two way switch complete all as specified and as directed.
188	All as per item No. 185 above but for One 3/5 pin socket outlet 6 amps point on same board complete ditto
189	All as per item No. 185 here in before but for one 3 pin modular switch socket outlet, 16 Amps on independent board with three runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded FRLS (ISI marked) (For phase, neutral and earth), 1100 Volts grade complete ditto
190	All as per item No. 185 here in before but for one 3 pin modular switch socket outlet, 15 Amps on independent board with three runs of PVC insulated and unsheathed copper conductor cable of size 4 sqmm multistranded FRLS (ISI marked) (For phase, neutral and earth) complete ditto. (For AC and Geyser)
191	S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.
192	S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.
193	S & F modular bell push 6 Amps, 240 Volts, 1 module,complete all as specified and as directed.
194	S & F switch modular single pole Two way 6 amp 240 volts,1 module complete all as specified and as directed.
195	S & F stepped type modular fan regulator, 120 W, 2 module, 240 Volt, 50 Hz complete all as specified and as directed.
196	S & F Modular socket outlet 6A, 240 Volts 2/3 pin combined, 2 module complete all as specified and as directed.
197	S & F Modular socket outlet 6A/16A, 240 Volts 2/3 pin combined, 2 module complete all as specified and as directed.
198	S & F Buzzer, Ding Dong, AC, 240 Volts, single pole complete all as specified and as directed.
199	S & F ceiling rose, three terminals, PVC/polycarbonate, isolated body with face backelitecomplete all as specified and directed.
200	S & F Telephone Socket RJ-45, suitable for CAT 6 cable, sheilded, folded metal, modular, 1 Module complete all as specified and as directed.
201	S & F TV coaxial Socket modular 1 module complete all as specified and as directed.
202	S & F Rigid non-metalic PVC conduit, 20mm external dia, exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed.
203	S & F Decorative wall mounting, brushed nickel finished fixture luminaire of double arm with opal glass diffuser with two LED lamp, 9W, B22 with all accessories, internally pre-wired and including connecting up complete all as specified and directed. (Make: Havell's Cat Part No. FLORETINE WL 1LS B22 SS or equivalent of make as per list of manufacturer's)
204	S & F Decorative bed side, brushed nickel finished fixture luminaire of single arm with opal glass diffuser with one LED lamp, 5W, B22 with all accessories, internally pre-wired and including connecting up complete all as specified and directed. (Make: Havell's Cat Part No. GOBLETO WL 1LS E27 GLD or equivalent of make as per list of manufacturer's)
205	Supply and fixing Smart extruded aluminium, LED batten lights fitting (4ft) with higher efficacy, 1x 20W, 220V, AC decorative box type with driver, holder, warm/cool white, double sided connection including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
206	Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with warm/cool white with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completeall as specified and directed.
207	Supply and fixing LED street light fitting, 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete and connecting up with flexible PVC insulated copper conductor cable from ceiling rose to fittings including complete all as specified and as directed.
208	S & F Lamp holder, angular type PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
209	S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size completeall as specified and directed.
210	S & F distribution board, vertical, made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, double door, VTPN, 4 way, 415 Volts grade with insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar, IP-43 protection with polyurthene (PU) gaskating, IK-08 mechanical impact resistance, flush to wall including testing suitable for fixing MCCB, MCB TP/SPN/SP etc including taking down existing unserviceable on and removing from site complete all as specified and as directed.
211	S & F MCCB, 415 Volt 16 KA, 4 Pole, 125 Amps Capacity complete all as specified and as directed .
212	S & F TPN DB, 4 way, made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, double door, 415 Volts grade with insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar, IP-43 protection with polyurthene (PU) gaskating, IK-08 mechanical impact resistance, flush to wall including testing suitable for fixing MCB TP/SPN/SP etc including taking down existing unserviceable on and removing from site complete all as specified and as directed.
213	S & F sheet metal enclosure, single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP, 20 Amps, 240 Volts complete all as specified and as directed.
214	M & L for Sub main wiring with 4 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper conductor cable, 1100 Volts Grade drawn through and including concealed PVC conduit of suitable size (20/25mm), medium grade, ISI marked with all conduit accesories and fittings along with one run of single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper conductor cable as earth continuity conductor connecting to common earth dolly complete all as specified and as directed.(Note :- Four runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of conduit shall be measured as one length (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)
215	M & L for Sub main wiring with 2 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper conductor cable drawn through and including PVC conduit of suitable size (medium grade) with all conduit accesories and fittings such as Tee, Bends, Elbow etc fixed on surface on wall along with 1 run of single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed.(Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of conduit shall be measured as one length)
216	S & F sheet metal enclosure, double door powder coated painted for MCB DB, SPN, 8 way with din rail and bus bar including grouting the DB to wall and making good to the disturbed surfaces to match the existing one complete all as specified and as directed.
217	S & F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole, 6 to 32 Amps current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed
218	Supply and fixing amp rating 240V, 10 KA, 'B' curve miniature circuit breaker (MCB) of single poles and 40 AMP current carrying capacity, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed
219	S & F RCBOs for earth leakage, overload & short- circuit protection, 40 Amps capacity, 4 pole, 300mA, 415 Volts complete all as specified and as directed
220	S & F RCBOs for earth leakage, overload & short circuit protection, 25 Amps, double pole, 100mA, 230 Volts complete all as specified and as directed
221	Taking down carefully the existing serviceable electric water heater of any capacity and keeping in safe custody, fixing the same after rewiring including clamps, hooks, hol fastener etc and connecting up including making electric connections complete all as specified and as directed.
222	Taking down carefully existing serviceable ceiling fan of any sweep by disconnecting the cable ends etc, removing the fan for keeping in safe custody, re-hanging the ceiling fan with down rod after rewiring including clamps, hooks, hold fastener etc and connecting up including making electric connection from ceiling rose or connector to fan complete all as specified and directed.
223	Disconnect and taking down existing exhuast fan of size 300/250mm sweep with louver and hand over to MES store yard for safe custody complete all as specified and directed.
224	Fixing only exhaust fan, PVC 250mm sweep/metal 300mm sweep and connecting up including cleaning and painting with one coat of white enamel paint and provn of cable from ceiling rose/connector to fan complete all as specified and directed. (Note: Old serviceable exhaust fan as obtained from MES store shall be re-used at site)
225	Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with, blades, and frame and louvers, complete with all accessories and electric connection including making necessary holes in walls and making good disturbed surfaces as per the existing one complete all as specified and directed
226	M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (light grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge.
227	ELECTRIC CHIMNEYS & F SS wall mounted chimney hood with baffle filter of size 750x512x575mm (WxDxH) to discharge out hot gases to the atmosphere maximum suction 1390 Cum/Hr, gesture control, intelligent uato clean, silent inverter motor, min noise level 48 db complete all as specified and directed. (Make: Crompton Cat Part No. Quiet Pro CHD-QPVB75FLE-MBL or equivelant of make as per list of manufacturer's)(Note: (i) The unit quoted rate deemed to be ionclusive of complete ducting system with insulation for discharging out exhaust gases from the chimney to the atmosphere(ii) The quoted rate also deemed to be inclusive of cutting of existing wall and slab after complete fitted electric chimney and making good disturbed surfaces to match with the existing one such as plastering, painting etc complete all as directed by the Engr-in-Charge)
228	HOT WATER SUPPLYSupply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etccomplete all as specified and directed.
229	EXTERNAL WATER SUPPLYExcavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
230	Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.
231	Supply, laying, connection and testing 25mm bore, Steel water tubing, galvanised, medium grade with all fittings, laid in trenches, etc complete all as specified and directed. (Note: Excavation and earth work work shall be measured and paid seperately)
232	EXTERNAL ELECTRIC SUPPLYSupply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately)
233	Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately)
234	Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately)
235	S & F 50 mm bore, High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed.
236	S & F 40 mm bore, High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed.
237	S & F 25 mm bore, High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed. Total in Figures 0.0 0.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Addition Alteration And Special Repair To Certain Officers, Jcos And Or Md Accommodation At Pangode Mil Stn Under Ge (Army) Trivandrum, Trivandrum-Kerala

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Addition Alteration And Special Repair To Certain Officers, Jcos And Or Md Accommodation At Pangode Mil Stn Under Ge (Army) Trivandrum, Trivandrum-Kerala

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us